Woofers: The JL Audio Evolution C3-525 convertible component
system includes 5-1/4" woofers with injection-molded polymer frames, mineral
filled polypropylene cones, rubber surrounds, ferrite magnets, and 1" voice
coils with Kapton formers. In the center of each cone is a phase plug; the phase
plug can be removed and the tweeter mounted in its place to create a coaxial
Tweeters: The 1" silk dome tweeters are Ferro fluid cooled
and use neodymium magnets. Silk is lightweight, efficient, and offers excellent high
frequency extension. It is also designed for durability in the extreme automotive
environment. Flush mount and surface mount housings are included, along with
fixtures to coaxially mount the tweeters to the woofers.
| ||Frame Diameter||Cutout Diameter||Mounting Height||Mounting Depth|
|Surface Mount||1.94"||N/A||0.92"||Screw depth|
Coaxial Mounting: The tweeters can be mounted in the center
of the woofers to create coaxial speakers. When the tweeters are mounted to the
woofers the speaker is taller; the mounting height increases to 0.746 inches.
Two-way Crossover System: The C3 component system utilizes
a 2-way crossover system with Mylar capacitors and air-core inductors:
- High Pass: third order (18
dB/octave slope); four tweeter level settings are
selectable to compensate for mounting location or
orientation; +2.0 dB, Reference, -2 dB, and -4 dB
- Low Pass: first order (6
- Midrange Presence: there are
three settings that affect the amplitude of the
upper midrange response, designed to compensate
for mounting location or orientation; choose High,
Reference, or Low
Tweeter Protection: The crossover network has an electronic
tweeter protection circuit built in; it monitors the current and disconnects the
tweeter when it senses and overload. The circuit automatically resets once the
overload is removed.
Crossover Wiring: The terminal strip will accept bare wire
or spade connectors up to 0.32" wide (the included crimp-on spade
connectors are 0.255" wide and will accept up to 12-gauge wire).
- Width: 3.368"
- Height: 1.415"
- Depth: 4.739" (plus wire)
Connection Note: The C3 component system comes with no speaker
wire. Instead, several spade connectors and quick slides that accommodate wire
up to 12-gauge are included in the hardware pack to be crimped onto speaker wire
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.