Skip Navigation

JL Audio C3-650

Evolution™ C3 Series 6-3/4" convertible component speaker system

5 Reviews | 2 questions - 4 answers

Find what fits your vehicle

Can't find your exact vehicle?

Item # 136C3650

Low Stock

Ships Today

Calculating shipping cut-off...

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the JL Audio C3-650

The C3-650 component system uses a 6-3/4" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.

Convertible speaker system

Versatile speaker system for any space

JL Audio's Evolution C3 speaker systems allow you to choose the best configuration for great sound in your vehicle. Mount the woofers and tweeters separately, and a C3 component system will fill your car with incredibly detailed, rich, and crystal-clear music, perfectly positioned in your listening space. In vehicles with limited space, you can mount the C3 tweeter inside the woofer to create a full-range, coaxial speaker that still performs with breathtaking impact.

Advanced material construction leads to clean musical reproduction

The C3-650 component system uses a 6-3/4" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.

Silk tweeters and versatile crossover networks

The C3 tweeters use ferrofluid cooling to handle extreme levels of high-frequency information without overheating. Mounted separately or coaxially, these 1" silk dome tweeters broadcast crisp musical detail evenly without harshness. Separate, outboard crossovers use premium components to direct the signal flow to your woofers and tweeters. You can select from three midrange settings and four levels of tweeter presence to match the speaker system to your listening environment.

Note: JL Audio describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Priced per pair

I recently installed these speakers in my 2003 Honda Civic sedan with the tweeters on axis on the a pillars head unit is A pioneer deh 80 prs with a mosconi as 100.4 amp and all I can say is wow great staging and powerful clean sound

Steve, Vancouver bc

What's in the Box:

  • 2 Woofers
  • 2 Tweeters
  • 2 Crossovers
  • 2 Woofer grilles
  • 2 Flush mount tweeter housings
  • 2 Surface mount tweeter housings
  • 2 Coaxial mount tweeter fixtures
  • 2 Metal spring clips for tweeter fixtures
  • Two M4x30mm Pan-head machine screws
  • 2 Crimp-on 0.187" Male quick slides
  • 2 Crimp-on 0.110" Male quick slides
  • 2 Crimp-on 0.25" Female quick slides
  • 2 Crimp-on 0.187" Female quick slides
  • 4 Crimp-on 0.110" Female quick slides
  • 12 Crimp-on spade connectors
  • Four 1" Flat head self-tapping screws
  • Twelve 1-1/8" Pan head self-tapping screws
  • 8 Speed clips
  • Owner's manual
  • Woofer cutout template

Product Highlights:

  • component speaker system includes two 6-3/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
  • mica-filled polypropylene woofer with butyl rubber surround
  • glass-filled polymer frame with Elevated Frame Cooling
  • 1" silk dome tweeter
  • 2-way external crossover with adjustments for coaxial or separate tweeter placement, and 4-position tweeter level
  • tweeter mounts for separate or coaxial installations included
  • phase plug provided when tweeter mounted separately
  • power range: 25-75 watts RMS (150 watts peak)
  • frequency response: 48-25,000 Hz
  • sensitivity: 90 dB
  • depth: 2-9/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

JL Audio C3-650 Reviews

Average Customer Review(s):

(5 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design 1" Dome
Tweeter Composition Silk
Woofer Composition Mineral-filled poly
Woofer Surround Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 90
Sensitivity at 2.83 volts N/A
Frequency Response 48 - 25k Hz
Minimum RMS Wattage 25
Maximum RMS Wattage 75
Peak Power Handling (Watts) 150
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 9/16
Bottom-mount Depth (Inches) 2 3/4
Cutout Diameter or Length (inches) 5 9/16

Product Research

Features

Woofers: The JL Audio Evolution C3-650 convertible component system includes 6-3/4" woofers with injection-molded polymer frames, mineral filled polypropylene cones, rubber surrounds, ferrite magnets, and 1" voice coils with Kapton formers. In the center of each cone is a phase plug; the phase plug can be removed and the tweeter mounted in its place to create a coaxial speaker.

Tweeters: The 1" silk dome tweeters are Ferro fluid cooled and use neodymium magnets. Silk is lightweight and great for high frequency extension and efficiency. It is also designed for durability in the extreme automotive environment. Flush mount and surface mount housings are included, along with fixtures to coaxially mount the tweeters to the woofers.

Tweeter Dimensions:

  Frame Diameter Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.134" 1.875" 0.25" 0.853"
Surface Mount 1.926" Screw holes only 0.981" Screw depth only

Coaxial Mounting: The tweeters can be mounted in the center of the woofers to create coaxial speakers. When the tweeters are mounted to the woofers the speaker is taller; the mounting height increases to 0.775", 0.575" for the tweeter protrusion.

Two-way Crossover System: The C3 component system utilizes a 2-way crossover system with Mylar capacitors and air-core inductors:

  • High Pass: second order (12 dB/octave slope); four tweeter level settings are selectable to compensate for mounting location or orientation; +2.0 dB, Reference, -2 dB, and -4 dB
  • Low Pass: first order (6 dB/octave slope)
  • Midrange Presence: there are three settings that affect the amplitude of the upper midrange response, designed to compensate for mounting location or orientation; choose High, Reference, or Low

Tweeter Protection: The crossover network has an electronic tweeter protection circuit built in; it monitors the current and disconnects the tweeter when it senses and overload. The circuit automatically resets once the overload is removed.

Crossover Wiring: The terminal strip will accept bare wire or spade connectors up to 0.32" wide (the included crimp-on spade connectors are 0.255" wide).

Crossover Dimensions:

  • Width: 3.368"
  • Height: 1.415"
  • Depth: 4.739" (plus wire)

Connection Note: The C3 component system comes with no speaker wire. Instead, a number of spade connectors and quick slides are included in the hardware pack to be crimped onto speaker wire you provide.

Size Classification Note: Crutchfield has traditionally referred to this size speaker as a 6-3/4", while some manufacturers, including JL Audio, call it a 6-1/2". Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

2 questions already asked

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. JL Audio's Customer Service # is 1-954-624-0113. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Kenny  Apr 17, 2017 ]  Staff
Yes they can be used without the crossover but the tweeter and woofer are on separate terminals and must have wires ran to each one. IMO I wouldn't run it this way due to unwanted frequencies going to the woofer and tweeter. Also it could possibly change the ohms and cause problems for amplifiers or head units whichever is to be used. [ JOHN  Nov 20, 2014 ]
I am using them as coaxial, but I am certainly using the crossovers. I want the flexibility, and I'm skeptical how the speakers would work without them. They are clearly part of the designed package. My expectation is that they provide protection for the speakers as well as controlling the sound. I'm driving the speakers with 900/5 amp and would not want to risk leaving the crossovers out, so I am making room for them. Each speaker has a pair of terminals, whether you connect them as component or coaxial. I download the installation manuals from the Crutchfield site before buying to better inform my buying choices, and that would probably clear up your question. [ EUGENE  Nov 17, 2014 ]
You have to use the crossovers. [ DANIEL  Nov 16, 2014 ]
Articles