Skip Navigation

JL Audio C5-650

Evolution™ C5 Series 6-3/4" component speaker system

7 Reviews | 4 questions - 5 answers

Find what fits your vehicle

Can't find your exact vehicle?

Item # 136C5650

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the JL Audio C5-650

JL Audio's Evolution™ C5 premium component speaker systems reproduce your music with impressive fidelity and power. Your music will sound smooth and balanced, from the splash of a cymbal to the thump of an electric bass, and everything in between.

JL Audio C5-650

Top-tier car audio experience

JL Audio's Evolution™ C5 premium component speaker systems reproduce your music with impressive fidelity and power. Your music will sound smooth and balanced, from the splash of a cymbal to the thump of an electric bass, and everything in between.

The C5-650 component system features a pair of silk dome tweeters that broadcast all the musical details without a hint of harshness. JL Audio built the 6-3/4" woofers for extended cone travel so they'll move more air, putting more oomph in your music when the rhythm section kicks in. These woofers use the same patented cooling technology developed for the ZR Series speakers, allowing the C5 speakers to play with a wide dynamic range at all volumes.

The C5 crossovers feature 4-position tweeter and 3-position midrange levels that give you 12 possible adjustment combinations for exceptional control over the final sound.

Note: JL Audio describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Priced per pair

In process of upgrading my stock radio speakers to all JL audio. C5-650 components in the door & C5-650x in the rear deck and then the 10w6v3 in my trunk. 2014 Chevrolet Camaro. Can't wait to hear them! love JL.

Michael, Seabrook, TX

What's in the Box:

  • 2 Woofers
  • 2 Tweeters installed in flush-mount fixtures (with attached 6" speaker wires)
  • 2 Crossovers
  • 2 Grille frames
  • 2 Grilles
  • 2 Self-adhesive JL Audio badges
  • 2 Tweeter mounting rings
  • Butyl adhesive putty for woofer grilles
  • 2 Metal spring clips for tweeter fixtures
  • Two 1-1/4" pan-head machine screws
  • 4 Crimp-on 2.8mm male quick slides
  • Twelve 1-1/4" self-tapping screws
  • 8 Speed clips
  • 12 Crimp-on spade connectors
  • 2 Crimp-on 6.4mm female quick slides
  • 2 Crimp-on 4.7mm female quick slides
  • Owner's Manual
  • Woofer cutout template

Product Highlights:

  • component speaker system includes two 6-3/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles
  • mineral-filled polypropylene woofer with butyl rubber surround
  • cast alloy frame with Elevated Frame Cooling
  • 3/4" silk dome tweeter
  • 2-way external crossover with 4-position tweeter level and 3-position midrange control
  • 4-ohm impedance
  • power range: 25-75 watts RMS (225 watts peak)
  • frequency response: 48-25,000 Hz
  • sensitivity: 89.5 dB
  • depth: 2-9/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

JL Audio C5-650 Reviews

Average Customer Review(s):

(7 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design 3/4" Dome
Tweeter Composition Silk
Woofer Composition Mineral-filled poly
Woofer Surround Butyl rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 89.5
Sensitivity at 2.83 volts N/A
Frequency Response 48 - 25k Hz
Minimum RMS Wattage 25
Maximum RMS Wattage 75
Peak Power Handling (Watts) 225
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 9/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5 9/16

Product Research

Woofer Features
Tweeter Features
Crossover Features

Woofer Features

Cast Alloy Baskets: The Evolution C5 component speakers feature cast alloy woofer baskets, while incorporating JL Audio's patented "Elevated Frame" cooling system. This cooling technology, also found on the flagship ZR component systems and W7 and W6v2 subwoofers, allows air to flow directly across the top plate and onto the voice coil windings to greatly improve linearity at all listening levels.

Motor Structure: The DMA (Dynamic Motor Analysis)-optimized motor structure achieve outstanding linearity.

Woofer Cones: The cone and suspension elements were designed and manufactured by the world-famous Dr. Kurt Müller & Co of Germany. The speakers feature low-mass, mineral-filled polypropylene cones with butyl rubber surrounds. The cone and surround are inherently well damped to deliver an uncolored, neutral midrange without any coloration. The speakers are also equipped with symmetrical-roll, hybrid-weave spiders.

Tweeter Features

Silk Domes: The C5 component system's 3/4" silk dome tweeters are incredibly smooth on- and off-axis for accurate imaging and a big, stable soundstage.

Neodymium Magnets: The small neodymium magnets and small chassis give you excellent tweeter placement flexibility.

Performance: Each pair of C5 tweeters is tested and matched to within 1 dB of JL Audio's reference curve to ensure optimum system performance.

Mounting Options: The tweeters come mounted in JL Audio's RSR mounting system to permit precise angling of the tweeters after installation. There are five available positions for angling the tweeter inside the flush mount. The mounting dimensions are as follows:

  • Mounting Depth: 0.56" (1.67" screw depth)
  • Mounting Height: 0.36"
  • Frame Diameter: 1.758"
  • Cutout Diameter: 1.49"

Crossover Features

Two-way Crossover System: The C5 component system utilizes a true 2-way crossover system:

  • High Pass: On the tweeters is a second order high-pass filter utilizing premium Mylar capacitors combined with an air-core inductor. Four tweeter level settings are selectable via jumper pins: +2.0dB, Reference, -1.5dB, and -3.0dB.
  • Low Pass: The low-pass section features a first order filter with three levels of user-definable midrange presence: Low, Reference, and High.

Polyswitch: Polyswitch tweeter protection is incorporated into each C5 component system crossover system.

Barrier Strips: Connections to each crossover network are made via protected nickel-plated barrier strips.

Dimensions: The C5 crossover systems have the following dimensions: Width=3.367", Height=4.72", Depth=1.44"

Connection Note: The C5 component system comes with no speaker wire. Instead, a number of spade connectors and quick slides are included in the hardware pack to be crimped onto speaker wire you provide.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I took a chance and bought a used set on eBay, one woofer was DOA so I did what I should have done in the first place and ordered from Crutchfield. Replacing a Memphis M-Class component set. The JL woofers play a little lower, but overall I consider the woofers a push. The JL tweeters, on the other hand, are absolutely sublime! No comparison. [ hairen  Apr 22, 2016 ]

4 questions already asked

You could run a high pass filter (between 50-75hz) at the amp or head unit (the crossover doesn't filter out sub frequencies from your woofers). [ Connor  Jun 09, 2017 ]
It's the best for my Camero I love them [ Mohammed  Sep 18, 2016 ]
The JL Audio speakers are made to work in any given airspace so there is no specific amount you have to have. You'll just need the proper cutout diameter and enough mounting depth for the mid-bass driver to seat flush. I hope that helps. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Sep 17, 2016 ]  Staff
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Jul 25, 2014 ]  Staff
Articles