Skip Navigation

JL Audio JX500/1D

Mono subwoofer amplifier — 500 watts RMS x 1 at 2 ohms

35 Reviews | 11 questions - 23 answers


Our take on the JL Audio JX500/1D

JL Audio's JX500/1D mono amplifier will power your subwoofer with up to 500 watts RMS, so you can experience thunderous bass in your music. A variable low-pass filter and bass boost help you tune your sub to fit your system and sound its best. An optional remote level control lets you turn the sub up or down from the front seat.

Lots of power from a very small box

JL Audio's JX500/1D mono amplifier will power your subwoofer with up to 500 watts RMS, so you can experience thunderous bass in your music. A variable low-pass filter and bass boost help you tune your sub to fit your system and sound its best. An optional remote level control lets you turn the sub up or down from the front seat.

JL Audio's JX500/1D mono subwoofer amplifier

Compact, but beefy

You know you're holding a serious piece of sound equipment when you feel the heft of this tiny JX amp. JL Audio built it with sturdy, high-grade parts that ensure excellent heat management, provide high current flow, and deliver stable performance in almost any situation. You won't find blinking lights or meters on the outside of these amps, but you will find oversized output transistors and rugged MOSFET power supplies inside. The high-mass aluminum heatsink keeps things cool enough to virtually eliminate thermal shut-downs.

Confused about impedance? Check out our article on matching subs and amps.

This amp is a lot of thump in a small package. It is great. I wished I would have gotten 2 of them for the sale price. I messed that up. When it comes on sale again I will purchase another one.

Tyrone, Louisville, KY

What's in the Box:

  • Monoblock subwoofer amplifier
  • 10" Speaker-level harness
  • 4 Mounting screws (M4 x 18mm)
  • 4 Flat washers
  • 2.5mm Allen wrench
  • Owner's Manual (En/ Ger/ Sp/ Fr)

Product Highlights:

  • mono subwoofer amplifier
  • 300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
  • Class D amplifier design
  • MOSFET switching power supply
  • frequency response: 10 Hz - 150 Hz
  • variable low-pass filter (50-200 Hz, 12 dB/octave)
  • variable bass boost (0-12 dB at 45 Hz)
  • optional wired remote level control
  • preamp inputs and outputs
  • speaker-level inputs
  • 4-gauge power and ground leads and a 50-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and the amplifier is recommended
  • 7-7/8"W x 2-1/8"H x 7-11/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

JL Audio JX500/1D Reviews

Average Customer Review(s):

(35 Reviews)

JL Audio JX500/1D

Tyrone from Louisville, KY on 2/16/2017

Crutchfield Customer Review (What's this?)

This amp is a lot of thump in a small package. It is great. I wished I would have gotten 2 of them for the sale price. I messed that up. When it comes on sale again I will purchase another one.



JL Audio JX500/1D

Anonymous from Las Vegas, NV on 2/6/2017

Crutchfield Customer Review (What's this?)

Excellent little amplifier with plenty power to drive a Helix 10" Precision P10W subwoofer, and I would recommend it to anybody.



JL Audio JX500/1D

Anonymous from Bloomfield, IN on 2/2/2017

Crutchfield Customer Review (What's this?)

Very modern look and packs the cleanest powerful punch to your sub!



JL Audio JX500/1D

Anonymous from South Gate, CA on 1/25/2017

I installed this AMP in the driver's side rear console of my 2013 Yukon XL pushing a Kicker CVT 10" at 2 oHms in a MTX Thunderform box. More than ample crisp bass. Compact fit anywhere amp




Kolton H. from Texas on 9/1/2016

Crutchfield Customer Review (What's this?)

Great power and sound quality. Great design.

Pros: Good power in a small package.


JL Audio JX500/1D

Shayne from Ft Branch, IN on 7/4/2016

Crutchfield Customer Review (What's this?)

Works great.



JL amp

Zach from Seattle on 6/1/2016

Crutchfield Customer Review (What's this?)

Perfect little amp to run my subs

Pros: Compact and powerful

Cons: None

Compact Sub That Delivers Good Power

Mopo from Seattle on 3/21/2016

Crutchfield Customer Review (What's this?)

I was a little torn between this and the XD600/1v2. I liked the compact size of the JX, but the added features and a little more power on the XD was tempting. I am glad I went with the JX, since it is powering my JL 10w3v3-2 nicely. I have it at half power right now and it sounds great. I still need to dial in the voltage, but I can't complain.

Pros: Fits under the WRX passenger seat with ample room. Generates plenty of power. Seems to stay cool so far. The JL remote bass plugs right in. Good price for power/quality.

Cons: Not a fan of the design, but it is under the seat anyways. I like the look of the HD series personally...

JL Audio JX500/1D

mattesjl from easton,pa on 3/13/2016

Crutchfield Customer Review (What's this?)

a lot of power for such a small amp

Pros: easy to hide anywhere in the vehicle, small size


Impressive amp

Mike from Florida on 1/10/2016

Crutchfield Customer Review (What's this?)

I am thoroughly impressed with the power of this small amplifier. I have it pushing two 10" JL subs in my GMC Sierra crew cab. I can crank it up and haven't had any issues with it getting too hot or clipping out!

Pros: Small, compact, plenty of power

Cons: None so far

JL Audio JX500/1D

Darryn from Hartford CT on 12/27/2015

Crutchfield Customer Review (What's this?)

I installed this in my 370z pushing 2 JL 6W3V3-4 the sound is amazing, the power is all there and more if needed. Completely satisfied with the product for what was planned for my car. The size is perfect cause of the tight spaces in the car, it is ideal for small spaces and tight cars.

Pros: Lots of power, small package, fair price.


jl audio jx500/1d

Mike from Roseville,MI on 12/8/2015

I have this amplifier hooked up to the alpine type s 10-d4 subwoofer and this amplifier gives the subwoofer all the power it needs. The woofer itself is in a ported box and for the exceptional sound matching the mono amplifier and the alpine sub really thumps right thru. Again this is my first time with the jl audio amplifier along with the 4channel jl amplifier this too I would highly recommend as well

Pros: Clean and clear no problems with getting hot

Cons: None


James W from Maryland on 9/17/2015

Crutchfield Customer Review (What's this?)

When I decided to buy another amp and a set of subs for my "old" car, I was originally going to buy MTX. Why? Because Im currently the owner of a JL Audio HD750 (in the "new" car) and I didnt wanna spend JL Audio money on the "old" car. Then I saw this little JX500/1D. "Under 300? Under JL Audio's '1 dollar per watt' theory?" is that I said to myself. I was skeptical... Let me say this. Im not skeptical anymore. I tried to see if I could put this little pit bull into "protection" but my ears couldnt take it anymore... I've always said "Dont go by what you hear, go by what you HEAR". I've NEVER heard anything bad from JL Audio. I have been a JL Audio purist for a very long time. Dont be afraid of JL Audio's "budget" series. Its WELL WORTH IT! Trust me!

Pros: Everything... LOL

Cons: None...

JL AUDIO JX500/1D installed

Brian E from Chimacum, WA on 9/13/2015

Crutchfield Customer Review (What's this?)

Installed this amp in a 2012 Toyota Tacoma Access Cab with a JL Audio Stealth box @ 2ohms, and can only turn the amp up 3/4 of the way at 80hz



great amp

Aaronj from Brush, CO on 9/7/2015

Crutchfield Customer Review (What's this?)

Great amp with a small footprint. I have it powering the JL stealth box in a 2011 GMC Sierra Denali 2500 and it sounds awesome. Amp fits perfectly under the rear driver seat next to the spare tire tools.

Pros: Small

Cons: None

great amp

ninja from Arizona on 8/12/2015

Crutchfield Customer Review (What's this?)

Great amp, great power, and nice and small. Would buy again in a heart beat

Pros: Great amp, great power, and nice and small

Cons: none

Great sub amp

Jooshmeister from Airdrie, AB on 6/14/2015

I've had this amp for a few years now and basically only have one complaint (I'll get to it in a second). What was so appealing about the JX500 was its size. I drive a small sedan and there isn't a ton of space to spare (didn't stop me from installing a 12" sub), but having a small but perfectly capable amp was one less thing to be concerned about. Overall, the build quality is really good, with one caveat: over time, the low-level RCA input jacks weaken and, in my case, break. I attribute this to poor cable positioning that caused undue stress on the jack, leading to the breakage. Luckily, it still works.

Pros: Small footprint Great subwoofer amp Lots of power

Cons: Just a tiny bit expensive (great buy at ~$200-$250)


JoeS from Erie, PA on 10/18/2014

Crutchfield Customer Review (What's this?)

This is an awesome amp to run a subwoofer. I have it paired with the JL Audio CS112RB-W3v3 PowerWedge (running at 2 ohms). I also have the bass knob installed. This thing THUMPS HARD! It includes a built in crossover and bass boost. Looks great was very easy to install. Got a 4-gauge amp install kit from Crutchfield with the order. The bass hits low like with Brandy's I Wanna Down or EPMD's So Whatcha Sayin. VERY low and doesn't bottom out. Yet all other kinds of music like rock and country sound great. I couldn't be happier.

Pros: Quality name, easy install, powerful, built-in crossover.

Cons: None

Awesome Little Amp

Bobby from Hampton, VA on 9/25/2014

Crutchfield Customer Review (What's this?)

Great amp with a very small footprint. Fights perfect under my drivers seat of my 02 Lightning.

Pros: Plenty of power in a small package.

Cons: None

JL JX 500/1

Luke from Calgary, AB on 9/19/2014

Awesome amp!! Paired with JL 10w3 and it's perfect for my car! Once you tune the amp you will be amazed by the output!

Pros: Small and powerful

Cons: Can be a little tedious to tune but absolutely worth it

JL Audio JX500/1D

Anonymous from Spencerville,Ohio 45887 on 9/5/2014

Crutchfield Customer Review (What's this?)


Pros: True power

Cons: None

Really nice amp

Mike from Fort mill sc on 8/20/2014

Crutchfield Customer Review (What's this?)

Installed this into my wife's 2014 honda accord with two JL 12's. Really matches speakers perfect. Very nice amp for a good price.

Pros: Small, sleek looking, easy to mount and install. Powerful for its size.

Cons: None

Works great with my JL 10W3V4

Johnny D from California, Modesto on 3/23/2014

Crutchfield Customer Review (What's this?)

Small amp that packs a punch.

Pros: Compact Amplifier Easy to Install

Cons: No issues

You get what you pay for

GW from The Texas Panhandle on 2/26/2014

Crutchfield Customer Review (What's this?)

A perfect amp for running a subwoofer, JL Audio is as good as everybody says. You can rock all day and it comes back for more every time.

Pros: Simple, elegant, efficient, reliable

Cons: Ain't cheap

Very surprised for its size

E from Kingston, NY on 2/21/2014

I have to be honest, I am a solid novice when it comes down to high quality audio - but I am learning very quick. Recently starting playing HD music files and deleted all my MP3's. I have two Orion HCCA 10" Dual 2 Ohm subwoofers that are now powered by this little amp. This is amp is about a third of the size of the original amp I had installed and this JL amp is just as, if not a little more, powerful than the previous amp (not a JL). Such a breeze to tune and really seems to have cleaned up certain songs that have a very distinct bass line. I have my entire system set up mostly for best sound and not extreme bass, and this amp will run very cool for very extended times. Really recommend JL Audio for everyone looking for serious quality, and a seriously under rated amp. Don't be fooled by some other companies "peak" outputs.

Pros: Runs cool, easy to tune, very small and easy to install almost anyway. Probably could have put this in my glove box

Cons: Honestly it's hard to think of a negative yet, I have owned this amp about 6 months and still haven't had an issue.

Great amp

JR from OKC, OK on 11/13/2013

Crutchfield Customer Review (What's this?)

Great purchase but had a problem with the amp (red light). It happens and Crutchfield was great. I called with the issue was not on placed hold and the technical adviser was professional and thorough. Got a replacement in four days. It is pushing my JL Audio Stealthbox (10 inch). Plenty of power with no clipping (provided you have properly tuned the intensity as per JL Audio instructions).

Pros: Small, compact, clean power

Cons: none

A lot of power in a little package

C from Hilo, HI on 10/15/2013

Crutchfield Customer Review (What's this?)

This amp is great. It has a lot of power but is still small enough to fit just about anywhere.

Pros: Great power in a compact size.

Cons: Didn't come with an level knob; I had to buy it separately

Exactly what you expect fromJL

ChrisP from Bay Area, CA on 10/13/2013

Bought this amp to pair with a JL cp108lg-w3v3. I was considering the Alpine 500/1 but decided that the additional features and JL quality were enough to justify the extra cost. Mounting is a breeze and the power output is more than enough to power my sub. I am running through the stock stereo in my '13 Toyota tundra so the sound quality isn't exactly what you would get with preamps and a real EQ but the amp pushes the sub great. I would recommend this amp to anyone who has the money to spend on it. JL does it again.

Pros: More features, build quality, doesn't over heat.

Cons: Full retail prices

JL Audio JX500 1D WOW

9417200710 from Ellenton, FL on 9/8/2013

I have this amp pushing 2 Alpine SWE 10S4 subs in the trunk of a new Camaro with the stock radio head receiver, and this small amp has big power and a great deep clean sound. I had other comparable amps in the car as far as power output and this amp blows them away. I am using a Audio control line converter because I am using the stock receiver and this amp sounds great with power to spare, and if you like it loud this amp will provide it while keeping the bass clean.

Pros: Small size for vehicles with low space

Cons: none

Great Littie Amp!

L. Harris from Ohio on 4/12/2013

To save space in my '12 Mini Cooper Countryman, I had this amp installed with a remote knob (JL Audio RBC-1) and it sounds great! For now I have it connected to a Kenwood KFC-W3013PS 12" Sub, I plan on replacing the 12" with the JL Audio CP108LG-W3v3 which should will fit nicely under the fold flat floor. The current setup is LOUD!! After my poor ears had had enough, turned down the gain to about 1/4 and it is still impressive.

Pros: Small Size, Powerful


Small but Powerful

JHarris from Woodbridge va. on 3/4/2013

Crutchfield Customer Review (What's this?)

I got this amp to match my 500rms stealthbox. Although at this time it is installed without a true tune. It has most definitely met and exceeded my expectations. What can I say, it is JL we are talking about.

Pros: Small, easy install, not overly expensive. And to date no overheating.

Cons: None so far.

Quality in a small package

Josh from Tyler, TX on 10/15/2012

Crutchfield Customer Review (What's this?)

Build quality is excellent. Sound is excellent. The amp is under my seat, and powering one 10 inch JL dual coil under 2 ohms and is loud and crisp.

Pros: Small Cool Powerful



Rob in Florida from Palm Harbor Florida on 10/6/2012

Just had this amp installed and it sounds great! Have it pushing a JL Audio Stealth box loaded with a 10" W1v2 subwoofer. If you own a 2005 or newer Nissan Frontier crew cab then you know there isn't much room for amps. This amp fit under the front passenger seat like it was custom made to go there. Very nice solid construction and the sound quality so far is outstanding. The sub already sounds amazing and it is not even broken in yet. This sub is rated at 300 Watts RMS @ 4 ohms, but my car audio guy, who also is a JL reseller said they often under rate the RMS power on their amps. So this amp is more than enough to get the most out of the JL sub. I am running this off a Pioneer AVH-P3400BH head unit, a pair of Phoenix Gold TI65CS 6.5 Inch Component Speakers up front and Phoenix Gold TI65Cx 6.5 Inch Speakers in the rear doors powered by a Phoenix Gold SD500.4 500 Watt 4 Channel Amplifier (also purchased for its small size and superior performance) I wanted to match amp brand to speaker brand for the door and sub because I had heard this gives you better overall sound and I can tell you when I heard this system for the first time it was like I was sitting in a professional music studio, the sound quality was that amazing. This amp delivers outstanding lows and the articulation is incredible. I listen to rock, blues and now I am even listening to hip hop as it sounds so good on this system. The Crutchfield guys and gals were wonderful as always.

Pros: Small size, very powerful, nice looking and contructed well. It's a JL so you know you are getting a qaulity product. Runs cool.

Cons: High price, no gain control, the Signal to Noise Ratio @ 62 dB, which is low to the usual 80 to 90+ you see on other mono amps had me a little worried but so far not an issue.

Best sub amp ever!

wk_music from Salt Lake City on 9/11/2012

This thing is a little beast! I have it running 2 JL 10 inch subs and I can't believe the low end this amp puts out. My friends all swear I have 12's. I had an Alpine running the subs before this, same wattage, sounded horrible compared. Bass sounded so thin compared to the JL. I am sold on this amp, I can't wait to drive everywhere now so I can listen to my music. Very impressed.

Pros: Tiny amp, can put virtually anywhere. Runs cool. Easy install.

Cons: None, literally.

Sounds Awesome Matched With JL Speaker

Saint James, Inc. from New York on 7/6/2012

Crutchfield Customer Review (What's this?)

I have this matched with one JL Audio 10W3V3 installed in a Q Logic Carbon Fiber Rear Door Enclosure in my Jeep Wrangler and the articulation is incredible. I've compared it to a Sony XM1S which was plenty loud but not as punchy. I also tried an Alpine MRX-M50 which was decent too but kept cutting out. Although these three amps are in the same class, the JL JX 500/1D stands out and lives up to it's reputation. I have it dialed in at 200 LPF and I'm hearing bass drums and low strings I wasn't hearing before. In my car, the dials are set flat at 0 DB and it is really clean. I should also mention that I have a Kenwood MP342U as the controller with the LPF bypassed. on the head unit. Everything purchased here at Crutchfield - Couldn't be happier...Except if it was actually manufactured in JL's Florida facility like their other products.

Pros: Very precise LPF EQ. Clean Loud Power, Runs Cool. Solid. Small and easy to install.

Cons: Made in CHINA!


Hands-on research

Product Research



Monoblock Amplifier: The JL Audio JX500/1D monoblock subwoofer amplifier that has been optimized for low-frequency (10-150 Hz) amplification of connected subwoofers.

Note: The JX500/1D is not designed for driving full-range speakers, midrange drivers, or tweeters.

Class D Amplifier Circuit: The JX500/1D employs an advanced Class D switching design that allows it to produce 500 watts of clean subwoofer power while drawing significantly less current from your electrical system and generating less heat than a conventional Class A/B or Class B design.

MOSFET Switching Power Supply: The JL Audio JX series monoblock amplifier employs a rugged MOSFET power supply for outstanding reliability and operational stability.

Amplifier Ratings:

JX500/1D Amplifier Specifications Ohms Watts
Rated Continuous (RMS) Power @ 14.4V
(10-150Hz, 90dB S/N, 1% THD+N)
Rated Continuous (RMS) Power @ 12.5V
(10-150Hz, 90dB S/N, 1% THD+N)

High-Mass Heat Sink: A heavy extruded aluminum heat sink is designed to keep the JL Audio JX series amplifier in a comfortable thermal range during demanding operation. This high-mass, extruded heat sink removes heat from the amplifier circuitry, extending high-power operation. This improves reliability and reduces the frequency of thermally related shut-down event.

Protection Circuitry: The JX500/1D's protection circuitry automatically shuts the amplifier down if thermal limits are exceeded, a short-circuit is detected in the speaker wiring, or if low supply voltage limits are reached.

Status Indicator Lights: There are two status indicator lights on the right side of the amplifier.

  • Power (Green): This LED lights green to indicate that the amplifier is turned on and operating normally.
  • Protect (Red): The Protection LED lights red to indicate the amplifier's protection circuitry has been activated to prevent product failure due to thermal overload, a short-circuit, or a dangerously low impedance connected to the amplifier's outputs.


Input Sensitivity: The Input Sensitivity Control is used to match your source unit's output voltage to the input stage of the amplifier for maximum clean output:

  • Low-Level Input Range: 200mV-4V (RMS)
  • High-Level Input Range: 2V-10V (RMS)

Low Pass Crossover: The JL Audio JX500/1D monoblock amplifier is equipped with a 12dB/octave Butterworth low-pass filter with variable frequency selection from 50 to 200Hz.

Bass Boost: The amplifier is equipped with a variable 0 to +12dB, 45Hz Bass Boost.

Remote Level Control: The JX500/1D is equipped with an RJ-25 connection for an optional wired RBC-1 Remote Level Control (sold separately) that allows volume level adjustment of the amplifier from the front of your vehicle.


Power/Ground/Turn-On Terminals: The monoblock amplifier features set-screw terminals for the power, ground, and remote turn-on connections. A 2.5mm hex-wrench is supplied for tightening/loosening the set-screws.

  • Power and Ground: The JL Audio amplifier's set-screw Power and Ground connections are designed to accept 8 to 4 AWG power wire.
  • Remote Turn-On: The JL Audio JX series amplifier's set-screw turn-on lead will accept 18 to 8 AWG  wire.
Note: The amplifier is not equipped with a fuse. An external 50-amp AFS, AGU, or MAXI fuse (not included) must be installed on the power wire. If a wiring kit is used which includes a fuse with a value other than 50-amps, the original should be replaced with a 50-amp fuse.

Speaker Output Terminals: The JL Audio JX500/1D features four set-screw speaker terminals for an easy parallel subwoofer connection. The monoblock amplifier's four set-screw speaker terminals will accept 16 to 8 AWG speaker wire. A 2.5mm hex-wrench is supplied for tightening/loosening the set-screws.

Preamp Inputs: The monoblock amplifier features one set of stereo RCA input jacks. The amplifier features a dedicated Input Sensitivity gain control for these inputs. These controls are designed to match the input sensitivity of the JX500/1D to the specific signal source that is feeding it. The amplifier's low-level input can be set between 200mV-4V RMS.

Speaker Level Inputs: The JL Audio JX500/1D also accepts speaker level signals, including those from factory systems (without the need for a line-output converter), via the supplied 10" speaker-level harness. The amplifier's high-level input can be set between 2V-10V RMS.

Preamp Outputs: The JX500/1D incorporates a pass-through preamp output sections, so that additional amplifiers can easily be connected to the same signal feeding the monoblock amplifier. The preamp output signal is buffered to prevent noise.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

It is a perfect match for the subwoofer I purchased [ Dominick A.  Feb 04, 2017 ]
Two letters, JL [ r  Dec 19, 2016 ]
This amp was recommended by Crutchfield with my purchase of two JL W3 10's. I was sold on this amp after watching YouTube reviews. "JL audio is an industry standard and always delivers" [ David  Oct 11, 2016 ]
recommended by a friend [ Clint  Jun 21, 2016 ]
have a JL JX250 not enough power to push the JL10inch in the power wedge ported box at 4 ohms 175 watts. Bass is ok but in trunk of my car just not enough. [ Shannon  Mar 05, 2016 ]
Friends recommended to me. Loved the performance. [ Zach  Feb 09, 2016 ]

11 questions already asked

Use the 4 gauge. That's what I use and the amp performs perfectly [ JAMES  Mar 09, 2017 ]
You could probably get away with the 8awg but you're better off with the 4awg [ Jennifer  Mar 09, 2017 ]
8awg for 8 to 10 feet will work just fine [ BILL  Mar 08, 2017 ]
I went with 4 just to be on the safe side. [ ryan  Mar 08, 2017 ]
With your purchase from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings/connections on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. [ Kenny  Sep 16, 2016 ]  Staff
Always match the RMS wattage of the speakers as close as you can to the amp rating. [ Olinda  Jun 09, 2016 ]
Hi. It's all according to your ear. To get good solid bass I usually run it 3/4 of the way around. Between half and 3/4 should get you where you want it. Especially with cd's and higher quality audio. If the bass is too much with the radio you can back it down to half way. Experiment with it and see what fits your particular ears the best. Keep your bass setting on your head unit around 2 positive, any other bass settings you might have keep them neutral, in the middle. When listening to high quality audio once your woofers are broken in you can crank it on up past 3/4 if you want. They are 12's correct? [ Olinda  Jun 09, 2016 ]
The input sensitivity depends on the preamp voltage output of your head unit. I think most units today are around 4V which is good. Turn the sensitivity all the way down on the amp and then turn the volume of your head unit up to around 75% of the full capacity. You can adjust the sensitivity from there until you've got a good volume. Typically, the lower you make the sensitivity, the more headroom the amplifier has so it won't clip at high volumes. [ JOSEPH  Jun 09, 2016 ]
The JL Audio JX500/1D is a mono (single channel) amp so there will be no bridging. You can wire the two 4 Ohm coils of the woofer in parallel to the amplifier to present a final 2 Ohm load though. You'll just have to set the amplifier gains carefully as it does offer more wattage (500 RMS) than your woofer is rated to handle (350 RMS). I hope that helps! My Bio: [ Ryan  Mar 21, 2016 ]  Staff
The only way I know add a subsonic filter is by getting a crossover with one in it. You can connect the crossover on the wiring between the radio and the amp. Feel free to call us on 1-800-324-9695 for a personalized recommendation. My Bio: [ Paul  Mar 07, 2016 ]  Staff
You can turn off the amp on the amp as well [ Daniel  Dec 13, 2015 ]
You still have to run the remote line back to the head unit. [ RANDY L  Dec 12, 2015 ]
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Jun 12, 2015 ]  Staff
if I understand correctly those have a 300rms. x 2 would be 600 rms this amp is 500w. plus its a mono. my thoughts are it wont be enough. I run this amp with the jl audio stealthbox for the colorado crew cab which has the 10w3v3 with 500rms. sounds awesome, but my ears want a ported box... but thats just me. [ JASON  Sep 16, 2014 ]
I'm not sure. What I would do is go to Crutchfield's website and pullup one of those subs. Check the specs on it and see what the nominal power rating is and multiply that times two. William [ William  Sep 11, 2014 ]
It will power them but you may find distortion at higher output levels because it's not pushing enough rms power for 2 JLw3s . I'd look at at least a 750 or 1000 [ SPENCER  Sep 11, 2014 ]
It should Brian, this little things pumps out a strong 500w with no problem. I've had mine for a few years now and it's as good now as it was new. [ CHRIS M  Sep 11, 2014 ]
Hello and yes you do need it i have mine that way. [ EVERARDO  Jun 26, 2014 ]
A converter is not required. This amplifier comes with an additional wire harness that you can hook up your high level output (factory speaker wires) into without a problem. And it also has an RCA output if you were to add an additional amplifier later. [ ALAN A  Jun 26, 2014 ]
No you do not need a line output converter. The required wiring comes packaged with the amp to allow you a direct connection to your factory head unit via the speaker outputs of the radio [ ANTONIO  Jun 26, 2014 ]
What speaker wire outs do you use to hookup one sub? [ chris  Apr 24, 2014 ]
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: Or try our online support center: [ Jeff  Feb 01, 2014 ]  Staff