About the Sennheiser CH 800 S
Uncompromised headphone performance from Sennheiser
Uncompromised headphone performance from Sennheiser
Sennheiser has developed the ideal link between its flagship HD 800 S headphones and their high-performance amplifiers. The CH 800 S is a high-quality balanced cable designed for their HD 800 S headphones. Replace the stock cable with the CH 800 S and connect it to the Sennheiser HDVD 800 or HDV 820 to open up a world of audiophile delights for your ears to revel in.
This cable's four-pole XLR plug preserves the symmetrical signal flow from your Sennheiser amp through two pairs of silver-plated oxygen-free copper leads all the way to the independent left- and right-earcup connectors. This results in very precise signal transmission with almost no distortion, so you can maximize the sonic potential of your headphones and amplifier. You'll enjoy clean, wide-open sound with fine detail shining through and virtually no noise.
Product highlights:
- balanced headphone cable with 4-pole XLR connector
- left- and right-channel ODU connectors designed for connection to the Sennheiser HD 800 S headphones
- allow balanced connection to the Sennheiser HDV 820 and HDVD 800 headphone amplifiers
- two pairs of oxygen-free copper leads maintain a symmetrical signal flow to each channel
- leads are plated in silver, double-twisted, and shielded
- gold-plated contacts
- length: 9.8 feet (3 meters)
- weight: 4.6 oz.
- warranty: 2 years
- MFR # 505636
What's in the box:
- 11.5' (3.5 meters) Headphone cable for HD 800 headphones (with 2 proprietary connectors (ODU) on one end and one XLR-4 connector on the other end)
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Sennheiser CH 800 S
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sennheiser CH 800 S
Product Research
Features
Overview: The Sennheiser CH 800 S is a high-end cable for the HD 800 audiophile-grade headphones. It is 11.5' (3.5 meters) long, with two proprietary ODU connectors on one end (headphone) and a single XLR-4 connector on the other end (amplifier). The cable is very flexible, and has an elegant fabric covering to minimize friction and distortion picked up through cable contact.
Matched: The CH 800 S is optimally matched to Sennheiser's HDVD 800 and HDVA 600 headphone amplifiers. These headphone amps have XLR-4 output jacks to accommodate this cable.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Quality cable with no noticeable sound quality.. The effect of various cables is a subjective issue which may or may not represent value for you.
amham from New Jersey (what exit?)