Skip Navigation

Sennheiser HH-10

Holder for all over-the-head style headphones

17 Reviews

Item # 143HPHLDR

This item is no longer available.

Shop all Miscellaneous Audio Accessories


Our take on the Sennheiser HH-10

Leaving your headphones just lying around anywhere is seldom a good idea — especially if you own high-performance headphones. The HH-10 headphone holder from Sennheiser solves that problem by giving your over-the-head style headphones a home perch. Simply attach the sturdy clamp to the edge of a shelf or desktop, and hang your headphones on the padded cradle. Ridges on either side of the cradle prevent your 'phones from slipping off.

Product Highlights:

  • compatible with all over-the-head style headphones
  • built-in clamp
  • padded headphone cradle
  • 3-5/16"W x 4-13/16"H x 2-15/16"D
  • warranty: 60 days
  • Our 60-day money-back guarantee

What's in the Box:

  • Headphone holder (for over-the-head headphones)
  • Instruction Diagram

Great design, well made and flexible mounting options earned this 5 stars in my opinion.

TomZ, Orange county, CA


Sennheiser HH-10 Reviews

Average Customer Review(s):

(17 Reviews)

Good Heaphone holder

NJS from New York on 4/19/2015

Crutchfield Customer Review (What's this?)

As i recently purchased Sennheiser headphones i needed something to hold them on. Looking around at many holders, most very expensive as this was at other sites, but hard to find and not produced anymore. Crutchfield had it for a good price $19.99 compared to $59. on other sites. Holder is made well solid construction, can be used vertically or horizontally. More gentle then a stand, not putting pressure on the headphones while resting on it. Like the look, fits well on most thickness of table,desk,shelf, stereo rack and cabinet. Well worth it for any headphones keep them from falling or being knocked around. Mine being Sennheiser HD 650 so quite expensive, fit great on them. Crutchfield shipped fast, good service.

Pros: Nice design and look. Good fit, padded. Adjustable.

Cons: None yet...........

Great design

TomZ from Orange county, CA on 7/3/2014

Crutchfield Customer Review (What's this?)

Great design, well made and flexible mounting options earned this 5 stars in my opinion.

Pros: Well made and mounting options made installation a cinch.

Cons: None

Is it worth paying 20$ for a Holder?

Thiagarajan from Charlotte on 6/21/2014

Crutchfield Customer Review (What's this?)

I don't have any complaints about the quality and look of the holder. My only concern is, the stand is static (not portable). I use this holder only while i work in my computer (I have fixed the holder with my computer table). Is it worth paying 20$ for something which you won't use often.

Pros: Great look, You can install this easily

Cons: Pricey, Not portable

does the job

Sarkman from Boston, MA on 5/3/2014

Crutchfield Customer Review (What's this?)

Functional, and flexible. Does the job with flexible mounting options. Small profile

Pros: Compact, flexible with mounting options

Cons: None

Very versatile

Bo from Massachusetts on 2/23/2014

Crutchfield Customer Review (What's this?)

Solid and works as intended. A couple of reviewers complained that you can't mount this to anything thicker than 1" but that is not actually true. The headphone cradle can be removed from the clamp assembly to give you the option to: 1. Rotate 90-degrees to mount on either horizontal or vertical surface. 2. Re-attach the the two pieces through a choice of three openings to mount on thicker or thinner surfaces. By default the parts are connected to the middle opening, but moving it outward will open the clamp up to a max of 1.5" and moving it inward will allow the clamp to close down to zero. If this is not obvious by looking at it, searching "Sennheiser HH-10" on YouTube will bring up video instructions.

Pros: Sturdy enough Clamp gap span from 0 to 1.5 inches wide will accommodate virtually any common surface Can be mounted to both horizontal and vertical surfaces Headphones are stable in the cradle Not an eyesore

Cons: Could be sturdier if made of metal (but then less affordable as well)

Sennheiser HH-10 Review

Tim W from Bloomington,MN on 1/18/2014

Crutchfield Customer Review (What's this?)

The headphone holder looks nice and is easy moved. It is great



Sennheiser HH-10

Mike S. from Las Cruces, NM on 1/12/2014

Crutchfield Customer Review (What's this?)

This is a good, functional headphone holder. My only suggestion would be for the clamp to be a little wider to put on a thicker shelf material. Otherwise, it works as advertised.

Pros: Works for hanging up headphones.

Cons: The clamp should extend longer to fit on a shelf edge thicker than approx. 1".

Headphone Holder

Victor K from Lake Worth, Florida on 1/8/2014

Crutchfield Customer Review (What's this?)

Product well made worth every dollar

Pros: Works great.........

Cons: none

great product

william t from paducah ky on 11/10/2013

Crutchfield Customer Review (What's this?)

product does its job well with various ways to attach it,sturdy well made and will hold up for many years.

Pros: tough and somewhat versatile.and good price

Cons: be nice if it opened up wider

Perfect match

Anonymous from Hacienda Hts, CA on 5/25/2013

Crutchfield Customer Review (What's this?)

I needed a stand to mount on my component rack, this fit the bill perfectly! Crutchfield shipping was extremely quick and well packed. Thank you.

Pros: Cheap and easy to use.

Cons: none.

Cheap and surves it purpose

Anonymous from Hartselle, Alabama on 5/16/2013

Crutchfield Customer Review (What's this?)

This simple headphone holder serves its purpose. I have a closet with my AV receiver and MacBook Pro and this sit at the edge of a shelf to get the clutter off my desk. I have a pair of Audio Technica M50s and they fit comfortably.

Pros: Simple. Easy to use and looks great


Simple, economical and functional

pault from omaha on 5/2/2013

Crutchfield Customer Review (What's this?)

I bought this Sennheiser headphone hanger/holder because of economical feasibility. I have two other headphone hangers that now seems they are way overpriced and not as functional (i.e. Stedman) compared to this HH-10 model. Easy, inexpensive, practical and of course mobile, I recommend this holder to anyone looking for a place to set there headphones.

Pros: Good design. easy, economical, small and light. Can hang about just anywhere.

Cons: plastic hanger

Headphone hanger

Paul B. from Rockford, Il on 3/8/2013

Crutchfield Customer Review (What's this?)

It's a headphone hanger, not too much to say. It works. Nice padding on the hanger part. The locking part is a little weak. It's all plastic be careful because if you really tighten it down the clamp will bend out of shape.

Pros: great idea nice padding

Cons: clamp strength

Very Handy!

SherryW from Las Cruces, NM on 12/19/2012

Crutchfield Customer Review (What's this?)

This is a great little accessory to keep my headphones out of the way when not being used and to keep them from getting damaged. It works exactly as advertised and will clamp on, securely, to even a very thin object.

Pros: Sturdy, adjustable clamp. Keeps headphones safe and out of the way.

Cons: None

It works!

Old Coot from Sequim, WA on 12/14/2012

Crutchfield Customer Review (What's this?)

What can I say other than it does what it is designed to do?

Pros: It works

Cons: None

Sennheiser HH-10

L.G. from Ga on 10/10/2012

Crutchfield Customer Review (What's this?)

It works find, just a bit flimsy feeling. If you have no room on your table like me, they work great.



Super Design

BobH from Texas on 4/29/2011

Crutchfield Customer Review (What's this?)

Buy this holder! Looking for a place to hang your headset...this is it. They can be placed veritally and are just the right size for a full headset.




Hands-on research

Product Research


Overview: The Sennheiser Headphone Holder is designed to fit almost any over-the-head style headphones. The Sennheiser Headphone Holder features an adjustable "C"-clamp which attaches to a table, stand, or desk ledge. The Sennheiser Headphone Holder also features a padded vinyl headband-rest for your over-the-head style headphones.


  • C-clamp: The C-clamp has an adjustment height of 0.00" to 1.375".
  • Headband-Rest: 3.3125" (w) x 2.375" (d)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.