pretty simple, does what it says it does...
Crutchfield Customer Review (What's this?)
pretty simple, does what it says it does...
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
You've installed speakers and subwoofers so you can hear clear, vibrant music in your car. Why put up with road noise? Dynamat Xtreme Wedge Pack minimizes your car's irritating resonances and screens out noise from the wind, your engine, and surrounding traffic, all factors that can jeopardize sound quality.
Dynamat designed this self-adhesive Xtreme sheet for general use on rear decks, doors, floors, and trunks. Apply this sheet to a car door before mounting a speaker, and you'll transform flimsy metal into a solid, non-resonant baffle. Unlike Dynamat Original, you can also install Dynamat Xtreme on trunk lids, roofs, quarter panels, and even under your car's hood. And Xtreme proves four times more effective than Original in reducing noise, so you'll hear your music and nothing else.
One 32" x 18" sheet, 4 square feet total. Warranty: 60 days.
Want to know more? Check out our article on reducing road noise with Dynamat.
Average Customer Review(s):
pretty simple, does what it says it does...
Exactly as described and cut easily into pieces. Works great
Pros: Easy to use
Pros: Good product
Cons: No problem
It is hard to tell how much benefit in sound quality you get by applying this product since I was also installing new car door speakers. There should be a big warning label to wear gloves. The foil edges cut you before you realize. I should have searched better and maybe bought the speaker molded cups instead. The sales person did not talk about those.
Pros: Easy to cut and apply
Cons: wear gloves to prevent cuts. No way to tell how well (or not) it is working
Enough to do 4 door speakers
Pros: Easy to cut and stick
Cons: The aluminum will cut you if you aren't careful
Dynamat works great in speaker boxes. Definitely improves the sound output.
Installed in many vehicles and never disappointed, easy install and instant results.
Pros: Easy install instant results
Cons: Cost, less pricey options but this is tried and true.
Good stuff. Gets rid of vibrations and rattles. Only gave it 4 stars because it is expensive. Also, it comes rolled up, which makes peaks and valleys, think topographical map. You can see the peaks and valleys in the picture. Seems if it came shipped flat, not rolled, from the factory it would be flat and be easier to roll out once stuck to the panel. Just an observation though not a deal breaker. Adhesive is strong and sticks very well in spite of this.
Pros: Reduces rattles and vibrations
great product! used this in all my vehicles! also Crutchfield always has great products and fast shipping!
Installer was surprised by the adhesive capability and commented it's almost impossible to remove after application. He hasn't such high quality sound deadening material.
Pros: Good & strong adhesion to surface. Effective in reducing resonance.
Cons: Hard to rectify if applied wrongly since the adhesive is Super strong.
I've always used Dynamat "Original" when installing front door and/or rear deck speakers. I like to use it as a gasket and have always been very happy with the outcome. I had an old roll from many years ago that I have been using on multiple cars. It finally ran out and I could not find "Original" for sale. Discontinued? Anyways, bought this and it is alright. It's more like thick foil with gum stuck to it. Works as intended but not as good as the "Original" for making gaskets.
Pros: Stops rattles
Cons: Like thick foil with gum stuck to it. Lots of creases and hard to get a good smooth look.
Well worth the investment and time better bass response and dampens out any unwanted rattles that always occur with a high quality speaker upgrade
Pros: Does what it should , perfectly. Easy to customize the install
I cut this up into strips that was really easy to adhere to the metal areas behind and around the speaker. When I turned my stereo back on after installing the Dynamat, there was a really big improvement to the sound quality of my system. I would recommend this product to anybody who is serious about having a nice, clean sounding system for your car. No more silly rattle.
Pros: Easy install and big improvement to sound quality.
Cons: Can be messy on the fingers, but it's not a big deal.
I've used this product before. It simply does, what it is supposed to do. Deadens unwanted noise and reverberations.
Pros: Plain, simple, easy to use.
Works, just as described, will more than likely be ordering more to cover other areas of the vehicle.
I was on the fence with adding this onto my order and in the end I'm glad that I did. It made for an easier and better installation and it was worth the cost. I wrapped a layer in front of and behind each of four door speaker openings when replacing stock door speakers. I then attached the Crutchfield supplied speaker adaptors over the Dynamat - no rattle. I had enough left over to attach decent size squares to the doors' shells behind each speaker figuring it can't hurt and may absorb some vibration.
Pros: Easy to install, does what it is designed to do.
It helps, I guess. The doors shut with more of a thud now. I installed it with when I installed new speakers so I have no point of reference to compare its effect on the sound but I know it didn't hurt.
Pros: Its sticky.
Cons: Its expensive considering what it is - thick tape.
It's Dynamat. It damps panel vibration. It's not a fix for poor system design, cheap speakers, etc. Does exactly what it's supposed to do. Would be nice if it was a little cheaper, but you get what you pay for.
Pros: It works.
Cons: None, really.
This stuff just works. There are others out there that vary in price and quality but as far as I'm concerned, this works so why mess with others.
Pros: Easy to cut Easy to attach
I like the product, its easy to work with and provides a true benefit not only noise attenuation but also for sealing screw holes in the door that hold the speaker in case/when water gets in there. I used this as a "gasket" for installing my speakers in the door and folded the pie sliced pieces from the speaker opening up and to the inner side of the door as well.
Pros: sound dampening, insulation, and sealing properties.
Cons: none works as advertised
I will not argue against what this product does. Rather, I'd like to point out what it is: It is foil backed, butyl rubber. Other manufacturers produce foil backed butyl rubber at a fraction of the cost of Dynamat. The only difference I have detected is that Dynamat's foil layer *might* be a little heavier. There is nothing magical about Dynamat's foil backed butyl rubber. It is what it is, same as any other foil backed butyl rubber. Do yourself a favor and a little research into the material used, and save yourself a few $$$. Avoid foil backed asphalt and go with butyl. Butyl has better adhesion than aspalt and won't small like asphalt when your car has baked in the sun all day.
Pros: Does what it says
Cons: The premium paid for the name brand is out of line with the product itself.
I definitely need more of this. (I put 4 sq. ft. in my trunk) but I can already notice a difference. I will be purchasing more shortly.
I replaced the speakers in my Dodge Ram 1500 and used this product as part of the install. Simple installation. Product is a "mushy" type of rubber that cuts easily and adheres well to clean surfaces. I liked how the speakers settled into the rubber when I screwed them in. I have no buzzing or vibration issues with this installed. I figured it was worth a few extra dollars to reduce or eliminate the possibility of unwanted vibrations or rattling. Also, no rubber smell from this product at all.
Overview: Dynamat Xtreme provides four times the damping efficiency of Original Dynamat, the conforming ability of Premium Dynamat, and the radiant energy reflection of Super Dynamat. Dynamat Xtreme has an aluminum layer for high-temperature areas. Dynamat Xtreme will create a seal and damp the door panel to maximize your system's performance.
Self-Adhesive: There is a high tack permanent adhesive with a peel off plastic liner on the back of the Dynamat Xtreme.
Easy to Cut: The material cuts easily with scissors or a razor knife.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Adding Dynamat sound damping to your car quiets noise and vibration, giving you a quieter ride. This short video presents an overview of what Dynamat is and how it
this was over a year ago for my car speaker[ Hal Jun 21, 2017 ]
Adding a lot more power to my door speakers so I will need to deaden the door cards heavily to prevent rattling.[ John Jun 18, 2017 ]
I read the reviews. Even though this product is a more money than the other products out there, it seems to be thicker and people claim that it does what was designed to do. I will let you know once I install it.[ Timothy Jun 09, 2017 ]
Kevin steered me to this instead of 2 10x10 door sets. This set has more material and is actually cheaper than 2 of the 10x10 sets. Saved me over $10. Thanks Kevin![ Scott Jun 02, 2017 ]
Really tightens up and adds mass to my kick panels, helps midbass performance immensely.[ KENNETH Feb 20, 2017 ]
improve speaker sound[ Karl Dec 29, 2016 ]
Great product. Installing speakers and needed the extra size to make a custom enclosure work.[ Thomas A. Nov 12, 2016 ]
My trunk raddles like crazy![ Giovani Oct 25, 2016 ]
To make sure that my trunk does not fall apart.[ Anna Sep 10, 2016 ]
Choice this to make the install perfect after reading other comments.[ abfisch Aug 28, 2016 ]
For less vibration and durability on the install.[ ANDRES Jul 12, 2016 ]
needed to replace rotted, water soaked original equipment sound deadening in 2002 Avalon[ James Jun 19, 2016 ]
Right size for rear deck.[ Maverick Jun 08, 2016 ]
This product provides enough Dynamat product to cut into squares to apply to my trunk lid and other areas. Great idea when adding a sub-woofer to stop rattle from trunk lid and more.[ Barrett Hall Feb 18, 2016 ]
Dynamat has a good reputation and the piece will be big enough[ Steve Feb 08, 2016 ]
Reduces the vibrations. I wasn't sure how well this would work but I have no doubts anymore.[ Paul Dec 18, 2015 ]
This will depend largely on your vehicle. For details on installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what you will need for an installation.[ Kenny May 09, 2017 ] Staff
I'm sorry but I have only used this product in my Jaguar XK8. It works wonderfully in this particular application.[ ROBERT W Apr 10, 2016 ]
Absolutely it dampens a lot of sound and vibration.[ RICARDO Apr 10, 2016 ]
Self adhesive, and works great![ ANTHONY Jan 04, 2014 ]
No tape needed. I use a heat gun on the lowest setting and it did the job[ FERNANDO C Jan 03, 2014 ]
The material is self adhesive and can be easily cut and fitted. A hand roller is recommended to make good adhesive contact eliminating air bubble entrapment. A strong pair of upholstery shears or scissors works well for cutting and trimming if required. Do most of your cuts and fitting before you remove the protective adhesive backing for the final application, repositioning is next to impossible without damage once it has been installed. After you make cuts foil backing will have extra sharp edges in those areas and gloves should be considered to prevent injury. Finishing tape is not required but can be used on seams or overlaps if desired. It is a great product that conforms to odd shapes and works as it is designed too.[ SCOTT Jan 03, 2014 ]
Its self adherent[ CHRISTOPHER Jan 03, 2014 ]