Skip Navigation

Dynamat DynaTape

30-foot roll of 1.5"-wide aluminum finishing tape (Model #13100)

17 Reviews | 1 question - 9 answers

Overview

Our take on the Dynamat DynaTape

Dynamat DynaTape lets you finish your soundproofing projects with a clean look. You can use this 1.5"-wide aluminum tape to seal seams between sheets of Dynamat or to fill gaps between your vehicle's body panels. Use DynaTape to secure wiring that's routed through your car, giving your installation a professional look while reinforcing its noise-damping properties.

Dynamat DynaTape lets you finish your soundproofing projects with a clean look. You can use this 1.5"-wide aluminum tape to seal seams between sheets of Dynamat or to fill gaps between your vehicle's body panels. Use DynaTape to secure wiring that's routed through your car, giving your installation a professional look while reinforcing its noise-damping properties.

DynaTape features a transparent, pressure-sensitive acrylic peel-and-stick adhesive that applies easily so you can finish your project and enjoy better sound. DynaTape comes in a 30-foot roll. Warranty: 60 days.

Overall a pretty good product, the backing is pretty tacky, I do wish it was a little thicker tho. But a good buy for the $.

Sean, Logan, IA

What's in the Box:

  • Finishing tape
Reviews

Dynamat DynaTape Reviews

Average Customer Review(s):

(17 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Help with upcoming Dynamat Extreme install on 2016 Jeep Wrangler Unlimited. [ ROBERT  Jun 21, 2017 ]
The order that I placed earlier this week for Kicker speakers for my 2007 Honda Civic installation kit rings are not a perfect fit. Hopefully this will I close the gap. [ KELVIN  Jan 05, 2017 ]
Older truck i want to make sure i have something to cure vibrations in the doors while i have them apart [ Jason  Oct 20, 2016 ]
To tape down speaker wires in door panels, etc. Why? Because I didn't want to use ugly duct tape. [ Frederick  Aug 26, 2016 ]
will use to seal the seams between dynamat pieces, tape wires down, etc. [ Brian  Aug 07, 2016 ]
to tape seems around doors and floor board [ B  Aug 06, 2016 ]
I plan to use this to help with securing door panel wiring during installation of other soundproofing materials, as well as to fill in seams and gaps that are harder to accomplish with just the larger mats. [ DANIEL J  May 29, 2016 ]
going to buy dynamat in the future for sound deadening. currently using to tape wires etc [ Nicholas  Mar 29, 2016 ]
Road noise [ Wayne  Mar 16, 2016 ]
Proven accessory for dynamite for sealing seams and edges! [ Matt  Mar 11, 2016 ]
I'm using familiar with this tape and am using it to seal edges of Dynomat on doors and pillars. [ Dana  Mar 09, 2016 ]
I ordered subs and a amp. This will help give it the solid sound and I'm looking for [ Richard  Mar 07, 2016 ]
reduce vibrations [ Randall  Mar 03, 2016 ]
Does what it's supposed to and seals the joints between the Dynamat. Sticks well and completes the project. [ Steve  Feb 16, 2016 ]
Quality is good [ JAMES  Jan 29, 2016 ]

1 question already asked

No, Dyna tape alone will not do the job. However dynamat sheets like a trunk kit or bulk pack will eliminate the rattle. I've done this to a couple of rigs now it's awesome. The tape is good for taping wires down and filling in gaps in the dynamat. [ JACOB  Mar 08, 2014 ]
If by riddling you mean rattling, then no. It is a very thin tape, and if you want soundproofing capabilities you'll have to go with the dynamat itself (I think they have trunk kits but I may be mistaken). Yes it is considerably more expensive, but the tape by itself will offer zero sound dampening and you wouldn't notice a difference. [ MATTHEW  Dec 28, 2013 ]
I don't understand your question. What do you mean by "riddling"? [ WALTER  Dec 28, 2013 ]
In my novice opinion it will stop a loose rattling part if you know what specifically is rattling and can tape it down. [ KENNETH  Dec 28, 2013 ]
Andrew, I take it you mean 'rattling'. The Dynatape is used to cover exposed edges of Dynamat. It is the Dynamat that stops rattling, not Dynatape. [ GrumpyGoat  Dec 27, 2013 ]
I'm assuming you are referring to some sort of rattle or vibration related noise with bass notes in the trunk? If so this is a tape used primarily to fill the gaps or spaces inbetween sheets of Dynomat when trying to trim and finish. This tape is just the aluminum layer of Dynomat with adhesive .. It will not deaden or inactivate surface resonance. Hope this helps.... [ Susan  Dec 27, 2013 ]
Probably not. It worked for my license plate and some of my moldings, but for the trunk I had to glue some actual padding. The dynatape is pretty much aluminum foil tape. [ NICK  Dec 27, 2013 ]
No [ SHON D  Dec 27, 2013 ]
No. This tape is effectively the same as metal duct tape that you can but at the hardware store to seal HVAC ducts. It has no mat material and is only meant as a cosmetic transition between dynamic seams. [ Aaron  Dec 27, 2013 ]
Articles

Searches related to the Dynamat DynaTape 30-foot roll of 1.5"-wide aluminum finishing tape (Model #13100)