Crutchfield Customer Review (What's this?)
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 158XMN502 | MFR # XMN502
Price Break: -$40.00
$59.99 Earn up to 60 Rewards points
Bored with your vehicle's sound system? Sony's XM-N502 2-channel amplifier will add clarity and power to your system, delivering 65 watts RMS to each of your speakers, so you'll have more fun listening to music on the road. To add some low-frequency fun, you can bridge the MX-N502 amp into 1-channel mode and drive a subwoofer with 175 watts.
A low-pass filter helps your sub sound its best. Sony placed all of the MX-N502's connections and controls on the front of the amp, for a cleaner installation with easier access to adjustments. To protect the amp from overheating and shutting down, an Auto Thermal Control lowers the power output slightly during those moments of extreme, hard driving play. Sony shows its commitment to high quality by gold-plating this amp's connectors for reliable conductivity.
XM-N502 connection and control panel
Anonymous, Santa Fe, NM
Average Customer Review(s):
Excellent value. Cannot complain about one thing so far. It delivers exactly what I need. I would definitely recommend this product to a friend.
Muy buen producto.Real el poder de este pequeño amplificador.Utilizamos uno para voces y otro para los bajos.Conectado con un capacitor de 2.4farad.Las voces y sonidos altos alcanzaron un nivel de calidad en volumen sin distorsión.Y como siempre el mejor precio y servicio lo conseguí en Crutchfield.Gracias por el buen servicio para la gente de Puerto Rico.Espero que esto no cambie para Puerto Rico. Gracias. Very good product. This small amplifier is really powerful. We're using one for vocals and another one for bass. We have them connected with a 2.4 farad capacitor. The vocals and high-range sounds came through with real quality and without distortion at high volume, and as always I found the best price and service at Crutchfield. Thank you for the quality service to the people of Puerto Rico. I hope this remains unchanged. Thank you.
Cons:Crutchfield response on April 24, 2017 Translation provided by Crutchfield's International Sales & Support team.
I purchased this unit as a replacement for a dead amp. The installation was easy since I only had to disconnect the old, and connect the new. This unit is smaller and lighter than my old amp. I love how this amp sounds. I will buy again for my next car. Although it wasn't need, it was comforting to know that customer service was there to assist in case i did something wrong.
Great amp for the money powers a 12 in a sealed box just fine.
I am using this amp to drive a JL Audio Sealed 12" sub in my Ram 2500 long bed crew cab 4X4 Cummins diesel. I am pleased with this amp and recommend but you should also look at the Blaupunkt GTA-270-DSP. I took some time to play with this amp on my bench and in my truck before I decided to add a sub, it was originally purchased to drive the front door speakers and did a good job. Understand I am very picky about very clean distortion free audio even in my truck. This is a very good amp clean, quiet and I believe preforming better that its 1% THD rating. For anyone looking for good amp in this power range I would recommend this unit, it met and perhaps exceeded my expiations and is built well. My finished build is a Pioneer AVH-4200NEX AV receiver, Sony XM-4045 & XM-N502 amps, Blaupunkt GTA-270-DSP amp, Infinity REF-9623ix front door, REF-3002cfx dash, Kicker KSC65 back doors, JL Audio Sealed 12" sub and a lot of custom wiring. The 4 channel XM-4045 drives the dash and rear door speakers, XM-N502 in 1 channel mode the sub and the GTA-270 the front doors. All powered by #2 positive and negative feed from left side battery fused at 150 amps with custom noise filter.
Pros: Very good amp for the price and I would recommend it. Small size and well built. Unit is preforming very well driving my sub, runs warm not hot even when pushed hard.
Cons: None but looked at the Blaupunkt GTA-270-DSP as well.
Excellent amp, quality and great value. I was so pleased with the value that I purchased a second one for future use.
Pros: Compact size, Sony quality and well built.
No complaints, it's just about what I expected for the price. Perfect for my needs.
Don't let the price fool you! This sweet looking little amp does everything you would expect from a more pricier unit. It provides clean sound quality and is worth every penny! It was the easiest amp to install since all the connections are on one side. It barely gets warm after a couple hours of rocking out, so overheating hasn't been an issue like in most amps. Bottom line is you wouldn't regret having this amp in your vehicle!
Pros: Simple one sided connections, easy to hook up, clean sound, compact design, stays cool.
Very impressed with this little amp. I'm running it bridged (175w RMS@4ohms) into a Kicker TC10 10" truck sub box, and it does a wonderful job. Clean sound, runs cool, and is compact. For the sale price, I doubt there's a better bargain out there in that power range.
Pros: Good power, compact size, clean layout and sound, inexpensive.
I picked this amp because I can at least trust Sony more than any no-name/off brand. It's not the cheapest anyone could find, but seems pretty decent for the price. I actually considered other more well-regarded brands, but keeping in mind that I wanted inexpensive and audiophile quality was overkill, I ended up picking this amp. Can't say I'm disappointed. Something worth noting is how I maxed out the bass boost on the headunit. The amp seems to cope with that pretty well, pushing my 8" speakers to give a reasonably punchy bass. It certainly doesn't beat having a dedicated subwoofer, but it's not bad. I'd probably have to spend more to get any more bass.
Pros: Solid for the price. Clean sound.
Cons: No other features other than LPF.
I have been an electronics repair technician for over 25 years, I have repaired everything from VCR's to DVD players CRT TV's to flat-screen plasma's and more Radios than you can imagine. I only buy SONY and the reason is in all of the years I have been in this field Sony is the brand I have worked on the least and most of the times I have repaired a SONY product it was due to misuse and abuse. I am using the AMP with the LPF set to on bridged to a Sub-woofer it is installed under the rear seat of a 95 Jeep Cherokee that my 16 year old son drives. I have had no problems at all with thermal shutdown despite the non-existent air flow where the Amp is mounted. In my opinion you can't buy a better AMP for the money. By the way did I mention I live in Arizona and it gets hot here.
Pros: Sounds great, Never overheats even under harsh conditions perfect size for sub only using a high power Head unit for front and rear speakers.
Not a bad little amp. Feels light and a little cheaply made but it is a cheaper amp. All and all worth the money. The sound quality is good it works fine for door speakers etc.
Purchased this amp for my sons bday. Nice and simple hookup. The amp does everything it claims. I especially like the design in that all the connections are on the side of the amp instead of the end. I built a simple box to house the subs we already had and now my son has a very clean install in his mustang. the extra time with my son was a good bonus. Now I have my daughters truck next to do this coming Christmas. We will be in touch.... Again. Thanks Crutchfield. You guys rock. Oh, and a special shout out to your guys in the tech. Dept. for troubleshooting when I made a mistake. Duh..
Pros: Low cost, excellent quality, easy install, great tech support
Cons: Unable to flaw this product
Minimally fussy, costly and flashy - maximally functional, valued, and good looking... Good performance as a sub amp, and doing a bang-up job against 8ohm load and pounding rhythm and bass - haven't had to run heavy cable or cap or big fuses - actual power was originally the cig-lighter circuit, and it really works well
Pros: Size, inputs, options, power/price and body is the (nice) heat sink
Cons: No fan as far as I can tell... If it never gets too hot, then this is a positive anyway!
Excellent amplifier, quality sound. What I needed for a replacement Amp.
Pros: Easy to install nice and compact for limited space
Big boy panties requie Bigg amps so go with a tre 2002 or bigger Tor speaker poping power
Cons: Needs a power Cap for full capassity
Excellent amplifier, quality sound.
Pros: Easy to install nice and compact for limited space.
|RMS Power Output (Watts x Channels)||
65 x 2
|Peak Power Output (Watts x Channels)||500 x 1|
|Power at 2 Ohms (Watts x Channels)||85 x 2|
|Bridged Power (Watts x Channels)||175 x 1|
|Minimum Impedance Bridged||4|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||5-50K Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||93 dB|
|Low-Pass Crossover Frequency||80 Hz|
|Low-Pass Slope (dB/octave)||18 dB/octave|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost Frequency||N/A|
|Speaker Level Inputs||No|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare amplifiers on an equal basis. Using CEA-2006 criteria, the Sony XM-N502 is rated at 65 watts RMS x 2 channels, with a 93 dBA signal to noise ratio.
Pulse Power Supply: The amplifier utilizes a Pulse Power Supply system to regulate the fluctuating voltage received from the car's electrical system.
LPF: A two position switch turns the low pass filter (LPF) on/off, the crossover point is fixed at 80 Hz and the slope is 18 dB/octave.
Power Connections: The power, ground, and remote turn-on screw terminals are 0.35" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals. A protective cover is included for the power/ground/remote terminal block.
Speaker Connections: The speaker screw terminals are 0.35" wide. A Phillips-head or flat blade screw driver (not included) is required to tighten/loosen the terminals.
RCA Input: The amplifier features one pair of stereo RCA line level inputs (left/right).
Fuse: The amp is protected by a single 25-amp ATO blade fuse.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Decent price [ Jeffrey May 24, 2017 ]
Positive reviews and Sony's reputation. I use to use a lot of Sony produces in video production and always had a good experience. [ Eddie May 23, 2017 ]
This was a simple replacement for a Boston Acoustics GTA 602 that gave up the ghost after being locked in a trunk in the Florida heat for 7 years. Specs are similar and I'm not being overly choosy now that my car has broken in and has significant road and wind noise. [ David May 21, 2017 ]
Close in size and peek power as the one I have in my other vehicle. I hope that it preforms as well. [ Anthony May 14, 2017 ]
Closest Replacement For Old Unit [ Charles May 11, 2017 ]
Great value for what i need. [ Donald Apr 28, 2017 ]
I needed to replace an old Eclipse power amp. The Sony's inputs and speaker hookups are in a similar location, so the wiring will just swap over. The original installation had two of the Eclipse amps. I have already replaced one with the Sony amp. The Sony provides a clean, pleasing sound. [ David Feb 18, 2017 ]
I chose the Sony XM-N502 strictly because it was an Open Box unit and at a very reasonable price point. I have a history dating back more than 30 years with the Sony brand and have confidence the amplifier will meet my general need for amplification in a low wattage application. [ Patrick Feb 17, 2017 ]
Seems like a good value, and I respect Sony's good reputation for quality. [ Peter Jan 26, 2017 ]
good amp at a great price [ NERY Dec 30, 2016 ]
Sony is my preference when it comes to brand [ german Nov 26, 2016 ]
Will be my second one. Compact and I like the connections on one side of the amp. Great price [ J Gregory Nov 23, 2016 ]
to get the full use of new speakers, more power is needed. [ Roy Nov 22, 2016 ]
Good signal to noise ratio [ Chris Nov 13, 2016 ]
I purchased all the components for my truck stereo back in 1997. I still drive the truck with the sound system. The amp that powered the sub woofer finally gave out. I needed a replacement amp. [ Edmund J. Nov 13, 2016 ]
The Sony XM-N502 does require a remote turn-on lead for installation. If you would like to discuss further, feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat. I hope that helps! [ Larry Nov 20, 2016 ] Staff
From my understanding, it is designed to run the left and right channel in stereo (2-channel) or bridged mono (1-channel), not both modes at the same time. If you had a dual voice coil subwoofer, you could run the left and right channel to the sub instead of running in bridges mode. I think this is what you are implying. Either way, make sure you match the ohms of how you wire to your speaker impedance. [ JEFF J Nov 16, 2016 ]
I checked the manual and it does allow it. You need to install a cap inline with the main speakers and a coil inline with the sub. Depending on the crossover freq you want will depend on the values of the cap and coil. It shows the connections in the manual. [ J Gregory Nov 15, 2016 ]
No. This amp isn't made to do that. [ JOSEPH Nov 15, 2016 ]
Since this is a 2 channel amp, you can run 2 speakers in stereo mode OR bridge the 2 channels to run 1 mono channel. You can't do both. You would need a 4 channel amp to do that. [ eric Nov 14, 2016 ]
Tom, I hope this answer your question. MAX. CHANNEL CONFIGURATION AT 4 OHM (W) / THD (%) 65 W x 2 / 1.0% MAX. CHANNEL CONFIGURATION AT 2 OHM (W) / THD (%) 85 W x 2 / 1.0% Maximum Output Power (1 kHz) MAX. CHANNEL POWER CONFIGURATION AT 4 OHM 2 x 150 W MAX. CHANNEL CONFIGURATION AT 4 OHM BTL 1 x 500 W MAX. CHANNEL POWER CONFIGURATION AT 2 OHM 2 x 210 W [ JOSEPH Sep 16, 2016 ]
A lot of company's list their amps with power levels that really are not realistic but they still do it. If you drill down in the specs it does list 1x500watts at 4ohms BTL all done at 1khz. So yes it will give 500 watts but it's at one frequency level and probably more distortion than you could handle. Look at RMS power at 1% THD. That's the true power that is meaningful. It took me awhile to find the "500" listed as well. With that said the amp works great for my 2 10" subs in my 66 mustang. One thing that sold it for me was all connections are on one side of the amp so all cables come from one location. [ J Gregory Sep 13, 2016 ]
The 500W power that they mention is peak power into a 1 ohm load in bridged configuration. However, it's more than just peak, but is actually peak-to-peak, which takes into consideration the entire voltage/current waveform of a sinewave from the highest positive-going voltage to the lowest negative-going voltage. Their specs mention a bridged RMS power of 175W into a 1 ohm load. To get the peak power, simply multiply this figure by 1.414 (the square root of 2). So 175 X 1.414 = 247.45Wpk. To get peak-to-peak, multiply by 2, which gives 247.45 X 2 = 494.9Wpk-pk. Round up the answer, and you've got an attractive advertisement. Frankly, RMS power gives a better indication of what to expect in performance. [ Michael Sep 12, 2016 ]
Probably at max distortion, not totally horrid on sub duty, but not realistic of course.... Perhaps right before the fuse is blown. Into 2 ohm, dipping lower? Anyway 165 bridged at 4 ohms is probably about the max clean power [ Kenneth Sep 12, 2016 ]
The 65 watts per channel is the rms rated power @ 4 ohms which means that the amp can put out 65 continuous watts per channel at a Total Harmonic Distortion (THD) of 1% or less. This amp can accept a 2 ohm load and put out higher wattage. It can also be bridged (combining both channels to make a single channel). In this configuration, the amp puts out 175 watts rms @ 2ohms. The 500 watt figure is the peak power output in bridged mode. Peak power output on any amp will sound very distorted when the wattage exceeds rms rated output as THD increases exponentially above it. Click on "Details" to learn more. [ eric Sep 12, 2016 ]
The difference is max or peak power vs. RMS. When shopping for head units or amps, I only pay attention to RMS specs. RMS specs are the best ones to use when comparing different products and matching watts to your speakers. When considering speakers, you must pay attention to ohm specs also. [ JEFF J Sep 12, 2016 ]
Yes [ LEONARDO M Jan 12, 2016 ]
I forwarded your question to an Advisor and they responded with the following: There is no need to use wire that big with this amp, but you can use it as long as you put a terminal on the end of the wire. I don't expect the amp's inputs to take wire that big. By the way, that's a good match on this amp with those speakers! If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Aug 17, 2015 ] Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Feb 03, 2015 ] Staff
Sony [ Cecil W. Jan 05, 2015 ]
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy Jan 05, 2015 ] Staff