Skip Navigation

AudioControl FOUR.1

In-dash equalizer with line driver

6 Reviews | 1 question - 1 answer

Item # 161FOURP1

Out of Stock

Ship date unknown Reserve risk-free

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the AudioControl FOUR.1

Mount the FOUR.1i in your vehicle's dash opening along with your receiver, or under the dash if space is an issue. For connections, you'll find a set of inputs, front and rear outputs, and an auxiliary input for an iPod or other audio source. You can adjust response at 125, 500, 2000, and 8000 Hz, then use the parametric EQ to find and kill any bass trouble spots between 40 and 80 Hz.

This is not your father's EQ

AudioControl's FOUR.1i equalizer takes the old-school in-dash EQ to a whole new level. This little problem solver features 4-band equalization, a parametric bass equalizer, and a built-in line driver that'll send a hot, clean signal to your amps.

Rear connections

Find those trouble spots

Mount the FOUR.1i in your vehicle's dash opening along with your receiver, or under the dash if space is an issue. For connections, you'll find a set of inputs, front and rear outputs, and an auxiliary input for an iPod or other audio source. You can adjust response at 125, 500, 2000, and 8000 Hz, then use the parametric EQ to find and kill any bass trouble spots between 40 and 80 Hz.


Set up in an instant

AudioControl makes it easy. Bring up your input knob until its LED starts to flicker, then adjust your output level to get the most out of your amplifiers. You can switch between your main and auxiliary sources with the touch of a button. The ground isolation selector allows you to minimize noise in your system. You can choose between green or amber illumination.


Information provided by AudioControl

Features

Already have a great system but I could tell it could sound even better. The pre-amp line driver feature alone allows for a dramatic difference in clarity and sound quality!

jason, georgia

What's in the Box:

  • Pre-amp line driver/EQ
  • 2 Mounting brackets
  • 4 Mounting screws
  • Owner's manual
  • QC checklist
  • Product registration card

Product Highlights:

  • in-dash equalizer with line driver
  • steel chassis with gold-plated RCA jacks
  • 4-band EQ (125, 500, 2000, and 8000 Hz) with parametric equalization for bass (adjustable from 40 to 80 Hz, +/-12 dB)
  • balanced inputs eliminate noise
  • line driver increases output up to 9.5 volts RMS
  • inputs: stereo RCA, auxiliary RCA
  • outputs: front and rear
  • green or amber illumination
  • frequency response: 10 to 100,000 Hz
  • signal-to-noise ratio: 110 dB
  • fuse rating: 1 amp
  • size: 6-3/4"H x 5"W x 1"D
  • weight: 2 pounds
  • warranty: 5 years
  • Our 60-day money-back guarantee
Reviews

AudioControl FOUR.1 Reviews

Average Customer Review(s):

(6 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Description: The Four.1i is a combination equalizer/line driver. The 1/2 DIN chassis can be mounted in-dash, or under-dash using the included brackets.

4 Band Graphic EQ: The rotary knobs adjust the signal +/-12 dB at 125 Hz, 500 Hz, 2 kHz, and 8 kHz. There's a notch at each knob's center position so it's easy to return to the flat setting.

Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. Like the four graphic EQ bands, the adjustment range is +/-12 dB; the center frequency is continuously variable from 40 Hz to 80 Hz.

Line Driver: To achieve the best possible signal to noise ratio and dynamic range from your amplifier, the built-in line driver can increase the head unit's output voltage up to 20 dB (9.5 volts RMS/ 13 volts peak).

Aux In: In addition to the main input, there is an auxiliary input (stereo RCA). A switch on the front panel toggles between the two inputs.

Volume: If you choose, you can adjust the system volume using the Four.1i's volume knob. This allows you to leave the source volume at it's maximum un-clipped level, resulting in the best signal to noise ratio and dynamic range output from the source.

Fader: Because there is only one stereo line input and both front and rear line outputs, the front panel fader knob is needed to adjust the relative front and rear volume.

Input Gain: The input gain for the left and right channels is set independently; 0 dB to +20 dB. The +20 dB gain allows you to increase the head unit's line voltage to the top of your amp's input range; up to 9.5 volts RMS/13 volts peak.

Balanced Inputs/Outputs: Using the balanced differential input circuit cancels noise picked up in the transmission line between the Four.1i the the source unit, or between the Four.1i and the amplifiers. Both the main and auxiliary inputs and the outputs can be individually set to balanced or unbalanced, incase your amps don't accept balanced inputs.

Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.

Terminal Block: The power/ground/remote/illumination terminal is removable; the wiring is attached to the block, then the block is plugged into the rear panel of the Four.1i.

Illumination: The outer ring of each knob is lit whenever the illumination terminal is energized. The color is switchable between green and amber.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

What are the Labs?
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Because your site is so informative it made deciding what equipment to buy very easy, this is my fist time buying a audio system for a car, so I'm not very knowledgeable about car audio but your site helped me understand how to put a system together, looking forward to hearing how it sounds in my G35 coupe. Thanks for your knowledge [ Marion  Aug 26, 2016 ]

1 question already asked

Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  Nov 02, 2015 ]  Staff
Articles