Skip Navigation

Niles LVW-1

Line-level stereo volume control (White)

1 Review

Item # 190LVW1W

This item is no longer available.

Shop all In-wall Volume Controls


Our take on the Niles LVW-1

The Niles LVW-1 lets you adjust a line-level signal before it reaches your stereo amplifier. It's a great solution for systems where using a speaker-level volume control isn't practical — for example, if the stereo amplifier you're using is too powerful for typical speaker-level volume controls, or if you'd like to control the volume on a pair of powered speakers. And the LVW-1 installs in your wall for a neat, clean look.

Product Highlights:

  • adjusts the line level signal going into a stereo amplifier
  • infinitely variable attenuation
  • female stereo RCA inputs and outputs
  • 2-13/16"W x 4-5/16"H x 2-1/2"D
  • warranty: 10 years
  • Our 60-day money-back guarantee

What's in the Box:

  • LVW-1 volume control with attached white wallplate
  • 2 Faceplate screws
  • Installation & Operation Guide

Niles LVW-1 Reviews

Average Customer Review(s):

(1 Review)

Great workin volme control

edgar from anaheim on 6/11/2012

Crutchfield Customer Review (What's this?)

I send audio via a cat5e distributor to a room about 130 ft away. on the end is a balum that outputs audio and in between speakers and balum i placed this volume control. It sounds great. the balum is a hig fidfelity audio output and the speakers have a high fidfelity sound as well. the audio sounds nice crisp, clear and no ground problems at all. everything is at it should be. the product is high quality. the sodering is just enough, all metal, easy to install. even the RCA connections are gold plated. great piece. if u need to place an in wall RCA volume control in between an audio signal path, look no further.

Pros: all metal, gold plated contacts, great paint job, no messy sodering, sturdy circuit board

Cons: a bit on pricey side, need about 2.75 to 3 inches of depth.


Hands-on research

Product Research


Overview: The LVW-1 is an in-wall stereo volume control that connects between a line-level source and an amplifier.

Volume Control: The volume knob is continually variable.

Connections: Both the input and output are female stereo RCA jacks.

Mounting: The LVW-1 mounting depth 2-1/2" so it should be mounted in a 3" deep electrical box.

Required Tools: To install the LVW-1 you will need only a flat head screwdriver.


  • Level Control Impedance: 100 kΩ


  • Width: 2.775"
  • Height: 4.516"
  • Mounting Depth: 2.5" (minimum)
  • Knob Height (protrusion from wall): 0.985"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.