Overview: The Niles Audio OS5.3 indoor/outdoor speakers are designed for
outdoor installations, or for use indoors. They come with an integrated mounting
bracket for outdoor installations, and a shelf stand for placement on a
bookshelf. These high performance speakers are housed in weatherproof enclosures
that can handle extreme hot, cold, and moist environments.
Note: The Niles Audio OS5.3 is packaged as a pair.
Drivers: Each OS5.3 features a 5" Mica-filled
Polypropylene cone woofer
and a 1" Ultrasilk dome tweeter. The integrated woofer/baffle
design increases the cone area, which enhances the low frequency response. The
butyl rubber woofer surround helps damp resonance and provides exceptional
durability. The fluid-cooled tweeter has an ultra-wide dispersion pattern to
give you clear, detailed high frequencies.
Paintable: The OS5.3 speakers and removable grilles can be
painted to match your décor. Each speaker includes a clear plastic paint mask
let you cover the drivers while the paint is applied to the enclosure.
Weatherproof: Niles Audio OS speakers are designed to exceed
the military's strict specifications for preventing corrosion (MIL-STD-883D).
Speaker Terminals: The OS5.3 is equipped with a pair of
inverted 5-way binding post
terminals, which repel moisture. The terminals can accept up to 12-gauge
bare speaker wire, pin connectors, spade lugs, and dual and single banana plugs. For wire runs of less than 80 feet, 16- to 18-gauge wire is recommended.
You should use 14-gauge wire for runs of 80-200 feet, and 12-gauge wire for runs
over 200 feet.
Installation: The speakers can be mounted vertically or
horizontally with the integrated bracket, which attaches to the speaker on the
top and bottom with easy-to-remove screw knobs. The bracket has a variety of
holes for permanent installation by screws or nails. There are also two keyhole
slots for easy removal, if desired. The bracket also has a hole for passing
through the speaker wire. There is a 1/4"-20 threaded insert on the back for use
with 3rd party wall mount brackets.
Shelf Stand: For shelf placement, the OS5.3 comes with a
3-point shelf stand. After removing the bracket, the stand can be secured to the
speaker by the bottom screw knob. The shelf stand adds approximately 5/8" to the
overall height of the speaker.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.