Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Sliding stereo volume control with impedance magnification
Our take on the Niles SVC100K by Crutchfield's Marshall Chase
Hear the music, not the volume controller
Niles volume controls deliver sound to your speakers without getting in the way of the music. While lesser components add pops, clicks and static, Niles brings you pure enjoyment. Their premium-quality parts and construction ensure high-fidelity sound with amplifiers rated at up to 100 watts per channel of continuous power.
Great for systems large or small
These in-wall stereo volume controls offer intuitive operation for your multi-room audio system. The high-power, impedance-magnifying design lets you safely connect as many as eight controls and eight pairs of speakers to a typical receiver or amplifier without installing a speaker selector or any other type of protection device. The sliding control design provides an attractive, modern look.
If your amp's minimum impedance is 8 ohms, you can connect up to 8 pairs of 8-ohm speakers using these volume controls. If your amp's minimum impedance is 4 ohms, you can connect up to 16 pairs of 8 ohms speakers, or 8 pairs of 4 ohm speakers.
Product does exactly as stated in the description, this is my 1st Niles product and am pleased with it.
Dan, Ft worth Tx
What's in the Box:
- SVC100K Sliding Volume Control
- 4 Decora wallplates (White/Light Almond/Bone/Black)
- 4 Slider inserts (White/Light Almond/Bone/Black)
- 2 Mounting screws (Length=1")
- 2 Faceplate screws (Length=3/16")
- Installation & Operation Guide
- Limited Warranty Card
- connect up to 8 pairs of 8-ohm speakers to a single stereo amplifier (requires 1 volume control per speaker pair)
- recommended for use with Niles speaker connecting block
- adjustable impedance magnification (2x, 4x, and 8x)
- power handling: 100 watts per channel
- 12 step control, 54dB maximum attenuation
- pop-free switching between all steps
- removable screwless connectors accommodate up to 16-gauge wire
- Decora-style wall plate and snap-on color insert for quick and easy color changes
- includes: white, light almond, bone and black wall plates
- fits most 18-cubic-inch single-gang junction boxes at least 3" deep
- 2-15/16"W x 4-11/16"H (includes faceplate); depth behind plate: 2-9/16"
- UL-rated for safe in-wall installation
- warranty: 10 years
- Our 60-day money-back guarantee
Niles SVC100K Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The SVC100K (FG01653) is a high-power sliding stereo speaker volume control that connects between the speaker-level output of an amplifier, speaker selector, or a Niles distribution hub and a pair of speakers. It lets you adjust the volume of a pair of loudspeakers, just as a light dimmer enables you to control the light. Premium-quality parts and construction ensure high-fidelity sound with flat frequency response and 100 watts continuous power handling. It is designed for indoor use only.
Four Colors: The SVC100K installs in-wall in a standard single-gang junction box (J-box). The package includes a Decora faceplate and slider insert in each of four colors: white, light almond, bone, and black.
Selectable Impedance Magnifying Circuit: A universal impedance magnifying circuit enables the SVC100K to act as both a stereo and an impedance magnifying volume control. You can magnify the speakers' impedance by a factor of two, four, or eight, allowing you to connect up to eight pairs of speakers to a single amplifier or receiver. A sliding switch on the circuit board lets you set the impedance factor to 1x, 2x, 4x, or 8x.
12-Step Control: The slide switch gives you 12-step control, and a total of 54dB maximum attenuation. The high-quality construction assures you get pop-free switching between all steps.
Speaker Connectors: The 2-piece screwless speaker connectors make installation quick and secure. Each connector can accept up to 16-gauge wire.
Code Compliance: The SVC100K is listed to comply with local building codes. You should check with your local building official to ensure code compliance for your jurisdiction.
Mounting: The SVC100K has a mounting depth of 2-9/16". When installed, the unit extends 2-1/16" behind the sheetrock (assuming 1/2"-thick sheetrock). A standard 18 cubic-inch or larger J-box is required.
Speaker Wire: The SVC100K will accept stranded copper wire up to 16-gauge. Larger (lower gauge) wire is not recommended, as it will not fit into the connectors. Solid-core, aluminum, or "Romex" wire is not recommended. Most states require in-wall speaker wire to have a specific "CL" fire rating.
Required Tools: To install the SVC100K, you will need a Phillips screwdriver and wire stripper.
- Audio Power Handling: 100 watts/channel RMS; 200 watts/channel peak music power
- Impedance: compatible with 4-, 6-, and 8-ohm speaker systems
- Volume Control: W=1.529", H=4.071", D=3.668"
- Wall Plate: W=2.945", H=4.688", D=0.237" (Cutout: 1.31" x 2.628")
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Product reviews from the Crutchfield LabsWhat are the Labs?
Why did you buy this?
Niles name and the only ones that closely resemble my light switches it is mounted near. [ H Dec 06, 2016 ]
3 questions already asked
For 14 gauge wire, it's best to use a different model volume control that can accept the thicker gauge like the OnQ: https://www.crutchfield.com/p_717WHLAV1/On-Q-AU0100-WHLA-V1.html?tp=2971 Or Russound models: https://www.crutchfield.com/p_543ALT126R/Russound-ALT-126R.html?tp=2971 [ Ryan Jun 23, 2017 ] Staff
You can install 16 gauge jumper wires from the controller to your 14 gauge house wires. Anytime you change gauge (wire thickness) from larger to small there will be a little less power and a little more resistance. It's like going from a large garden hose to a smaller one. From an end-user standpoint, I doubt you'll notice any difference in output. [ DAVID Jun 16, 2017 ]
I used 18 AWG x 4 in-wall jacketed wire for my particular installation and it works fine. The manual for the SVC100K recommends 16 AWG "because the larger wire may not fit into the connectors" on the back of the unit. The unit works well. I have it installed for the garage speakers and have some older volume controls for the kitchen, hobby room, study, and deck with all of the speakers fed by an Onkyo through an impedance matching box to protect the amp. If you like the control, buy it, and your wire doesn't fit, you could make jumpers from the 14AWG to 16AWG at the control just using some crimp-style butt splices. There are other options as well. [ Colin Jun 16, 2017 ]
I believe so. I have many older knob style controllers and have been replacing them with these. They are universal can operate one or a few pairs of speakers. They come with all colors of plates. The old ones had to be ordered specifically the color and amount of speakers. [ Tim Jan 16, 2016 ]