Skip Navigation

Niles WS120

In-wall infrared sensor

7 Reviews | 1 question - 1 answer

Overview

Our take on the Niles WS120

This in-wall IR (infrared) sensor works as part of an IR repeater system, letting you control your audio/video components from other rooms in your home. It mounts unobtrusively in your wall and picks up commands from your audio/video system's remote control. The WS120 takes up the same space as a single light switch, and its wide angle of reception makes it easy to target from just about anywhere in the room.

This in-wall IR (infrared) sensor works as part of an IR repeater system, letting you control your audio/video components from other rooms in your home. It mounts unobtrusively in your wall and picks up commands from your audio/video system's remote control. The WS120 takes up the same space as a single light switch, and its wide angle of reception makes it easy to target from just about anywhere in the room.

To complete your IR repeater system, you'll also need:

  • An IR hub: The hub accepts the IR signals from the WS120 sensor, and passes the instructions on to your A/V gear via IR flashers.
  • IR flashers: The IR hub passes the commands from the WS120 to these infrared light-emitting devices, which in turn control your components.
  • Infrared cable to wire your IR repeater system.

Arrived on time good working order

knz, cyn ky

What's in the Box:

  • Wall-mount IR sensor with an attached white Decora insert
  • Connector module (installed)
  • White Decora single-gang faceplate
  • 2 Sensor mounting screws (Length=1-1/4")
  • 2 White painted faceplate mounting screws (Length=1/4")
  • Installation Guide

Product Highlights:

  • receiving range: 20' to 35' (depending on the strength of your remote)
  • LCD- and plasma-proof sensor design — works near flat-panel TVs
  • works near fluorescent lighting or indirect sunlight
  • bi-color LED confirms the reception of an IR command and the on/off status of your A/V system
  • includes Decora® plate and snap-in insert
  • mounts in single-gang junction box (2-3/4"W x 4-1/2"H x 1-1/4"D)
  • passes high data rate IR code formats, including Phillips RCMM codes
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

Niles WS120 Reviews

Average Customer Review(s):

(7 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

IR System Overview:  An infrared (IR) extender system enables you to control your IR remote controlled A/V equipment from a remote location. This enables you to place your A/V components out of sight (behind cabinet doors, in the rear of a room, or in a different room) and still conveniently control your equipment.

IR System Components: The WS120 Wall-mount Infrared Sensor is one of three elements that make up an infrared extender system:

  • IR Sensors (such as the WS120): IR Sensors are the "eyes" of the system, receiving IR commands from hand-held remote controls and relaying the commands to the Main System Unit via a 2-conductor shielded cable. Generally, sensors are placed so that you can easily and naturally point your remote control directly at them. In addition this wall-mount unit, IR sensors are also available in ceiling-mount, surface-mount and table-top models.
  • IR Main System Unit (such as MSU140, MSU250, MSU480 or MSU440Z): The IR Main System Unit provides a connection hub for IR sensors and/or keypads and IR flashers and is generally located near the A/V components. The Main System Unit, which is the "heart" of an IR extender system, has LED indicators to monitor the IR extender system.
  • IR Flashers (sold separately): IR Flashers re-transmit the infrared signals from the IR Main System Unit to your A/V components. Flashers are the "voice" of an IR extender system that "speaks" to your components.

Note: An IR sensor expansion hub, Model IRH610, is available to provide additional sensor inputs to y our system.

Universal Compatibility: When used in a complete system, this IR sensor is compatible with virtually all brands of A/V equipment and remote controls between 25kHz and 90kHz, including the recently introduced Philips RCMM codes.

Universal Noise Suppression: The sensor has a patent-pending Universal Noise Suppression design that effectively eliminates IR interference from plasma and LCD TVs, CFL (fluorescent) lighting, and indirect sunlight. This two-stage technology combines an optical noise filter with a "smart" electronic circuit to provide consistent, reliable control.

Decora Style: This WS120 is a Decora-style wall mount IR sensor and includes a removable white Decora insert and a white Decora faceplate.

Mounting: The WS120 is designed to be mounted in a single-gang electrical box that is within "line of sight" from most areas of the room. The sensor has a mounting depth of 1-1/4". As with any type of IR sensor, avoid locating the WS120 where it will be exposed to direct sunlight. It should not be installed into electrical boxes with 110-Volt devices or near any potential sources of electrical or optical noise, such as light dimmers, florescent lighting fixtures, low-voltage lights, and neon lights.

Wiring: The WS120 connects to the Niles infrared main systems unit (or IRH610 sensor expansion hub) with an individual "home run" of Category 5 ("Cat 5") cable. Most states and municipalities usually require the wire to have a specific "CL" fire rating. Please consult your local building inspection department for requirements in your area.

Interference Resistance: The WS120 is resistant to CFL interference created by fluorescent lighting. This gives you more installation flexibility into areas with fluorescent lighting.

IR Receiving Range: Tests with various manufacturers' remote controls show that the operating range can vary from 20 to 35 feet (depending upon the strength of your handheld remote). The IR pickup angle is 30° off-axis (horizontal and vertical) at 25 feet.

LED Indicator: This IR sensor features a bi-color LED which is useful when testing or troubleshooting the IR System. The LED should light solid green when power status is detected and flashes blue to confirm the reception of an infrared remote command.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

You'll need to supply your own CAT-5 or better cable to run between the IR sensor and the "hub". The hub (e.g., a Niles MSU480 Infrared Main System Unit) comes with connectors needed to attach the CAT-5 cable running from the IR sensor. No adapter or other connector is required. [ Mark  Jul 13, 2015 ]

Searches related to the Niles WS120 In-wall infrared sensor