Pull-Down TV Mount: The MM700 pull-down TV mount features
MantelMount's patented construction which combines high-quality automotive
pistons with heavy-duty 3mm steel construction and state-of-the-art counterbalance technology,
allowing virtually anyone to easily pull a large flat screen TV down off the
wall, suspend it at eye-level in front of their fireplace, and swivel it left or
right. MantelMount is built-in on three main principles -
- (1) Smooth, easy, consistent operation.
- (2) Safety of the TV and electronics.
- (3) Safety of the home and mounting environment.
Note: The MantelMount MM700 is designed for use only with decorative
fireplaces that are not the primary heat source for a house. Temperature at the
front edge of mantle should never exceed 110°
TV Compatibility: The MM700 supports 45" to 90" flat-panel TVs that
weigh between 30 lbs to 115 lbs. The flat-panel TV must have M5, M6, or M8
threaded wall-mount inserts on the back that measure 200mm-800mm (horizontal) x
100mm-550mm (vertical). Spacers are also provided in case your TV has an
irregular back-panel. There are gas spring adjustments that will need to be made
to accommodate the specific weight of the TV (refer to installation
VAL100 LG Non-VESA adapter kit (sold separately) is required for LG Curved
OLED TV's with 200mm x 300mm x 120mm mounting hole patterns (such as the
65EG9600, 55EF9500 and 65EF9500).
Exclusive MantelMount Features: The MM700 pull-down TV mount includes
exclusive MantelMount features that ensure proper operation & safety of your
- Horizontal Brace w/ Handle: Today's TVs are
getting thinner and more fragile. The Handle on the MantelMount MM700
directs all of the pulling forces directly to the mount instead of pulling
on the frame of the TV itself.
- Adjustable Stops: Vertical & swivel stops prevent your from
hitting your mantel or walls when lowering, swiveling or raising your
television. These adjustable stops prevent any part of the mount from
hitting the wall or mantel. The bottom travel stop is adjusted with two
screws and locknuts, so the TV and mount do not lower all the way into the
mantel. The side-to-side swivel stops are also adjusted with two screws and
locknuts, so that the TV doe not swivel into the mantel.
- Auto-Straightening: The MM700 MantelMount's patented
auto-straightening technology to "flatten" the TV as it is raised to the
upper position to prevent rotation into the wall. Raising your TV from
a swiveled position could easily cause a collision between the TV and wall.
However, the MantelMount's Auto-Straightening feature prevents this from
happening. Even from a swiveled positions, the MantelMount MM700
automatically straightens the TV when raised so that it never touches your
- Auto-Stabilization: MantelMount uses enhanced auto-stabilization
with gas springs to ensure that if one spring is stronger that the other
over time, it won't effect the mount. The stronger gas piston will
automatically take on more of the force from the TV's weight and motion,
thus maintaining a level TV over time.
- Heat-Sensing Pull-Down Handles: The MantelMount MM700 includes
exclusive heat-sensing handles that turn red if the temperature above your
fireplace exceeds a safe 110° Fahrenheit
- warning you if the heat from a burning fireplace is about to damage your
mounted television. If the handles turn red, you should immediately bring
the mount and TV to the raised position and turn off your fireplace.
Articulating Range: The MantelMount MM700 extends your TV from the
wall and lowers it over your fire place. It also offers downward tilt, left or
right swivel, and centering. The MM700 ensures that you always get the perfect
- Lowering: The MantelMount lowers your television up to 26". You
are able to stop your mounted TV anywhere along the 26" vertical travel path
and lock it into place.
- Extension: The MM700 mounts 5" from the wall and extends
forward up to
16.75" off the wall (half-drop) or 12.75" off the wall (full 26" drop). Your mantel must not extend from the mounting surface more
than 12.75"-16.75" (depending on how far of a drop you desire). The MM700 cannot extend past a mantel that is larger than 16.75"
(at half-drop) or 12.75" (at full-drop).
- Tilt & Center: The MantelMount features an
downward tilt in either the raised or lowered positions, so you get the
perfect viewing angle. Your mounted TV can also
be slid to the left or right (up to 2") to center the television with your
- Swivel: The MM700 lets you swivel your mounted television 35°
left or 35° right. Wider
televisions and deeper mantels will reduce the amount of left-or-right
swivel. For situations
where more swivel to one side is desired, a side swivel kit is provided
which allows for up to 60° in one direction (left or right - but not both).
The side swivel kit is only designed for smaller TVs and installations where
there is no mantel present. The Auto-Straightening features does not work
with the side swivel kit installed.
Built-In Soundbar Attachment: Brace extenders allow you to create
enough room beneath your TV and above the MM700's handles to easily attach your
soundbar speaker directly to the mount's horizontal brace, eliminating the need
for any 3rd party sound bar attachment. Your soundbar will need mounting holes
on the back that are spaced no wider than 31.5" apart and situated no higher
than 2.5" from the bottom of the speaker.
Note: Some soundbars will require the purchase of a proprietary
wall-mount bracket to use in conjunction with the MM700 soundbar attachment
(additional hardware also required). For example the
Sonos Playbar will need the
Kit (sold separately) and optional hardware (not included).
Paintable Covers & Cable Management: The
MantelMount MM700 comes with two paintable covers that hide the wall-mount plate
and hardware for a clean, neat, and professional looking installation. It also
comes with cable ties and cable tie anchors to help manage your TV's connector
cables. In addition, cable routing boxes attach to metal conduit so that cables
can be routed behind the wall without touching hot fireplace components and
possibly causing a fire. They provide a permanent passageway so cables can be
easily fed through the wall as new components are added.
Installation: The MantelMount MM700 comes
with mounting hardware for wood stud frame installation (requires two wood studs
with 5/8" thick or less wall covering). If you have a brick or concrete wall you
will need to purchase wall anchors suitable for your wall type. Wall anchors
should be available at your local hardware store. The space above the
mantle must be taller than the TV. You will need a
little over one inch of clearance above the TV and 3"-8" of clearance between
the your mantel and the MM700, depending on the size of your mantel (refer to
the installation manual).
- Required Tools:
- #2 Phillips screwdriver
- Electric drill
- 11/64" drill bit
- Set of Allen wrenches (4-5mm)
- Bubble level
- Stud finder
- 6mm open-end/box-end wrench
- 6mm socket wrench
- Optional Tools:
- Hack saw
- Drywall keyhole saw
- 1-1/2" Hole saw
- Paint brush
- The MantelMount
SSB40 Single Stud Wall Adapter (sold separately) serves as a direct
replacement for the included wall-plate when it can't reach existing stud
placement or when you want to attach to a single centered stud.
- The MantelMount
AB40 Adapter Bracket (sold separately) will serve as a
pass-through support when mounting to thin brick facades or
simulated stone panels made from foam, neither of which are strong
enough to support the weight of a the mount.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.