Skip Navigation

Kicker 10CVR104

CompVR 10" subwoofer with dual 4-ohm voice coils

5 Reviews

Item # 2061CVR104

This item is no longer available.

Shop all Component Subwoofers

Overview

Our take on the Kicker 10CVR104

Kicker CompVR subs let you kick out the jams without tearing a hole in your wallet. These subs handle plenty of power, and get their fierce sound from tough, injection-molded polypropylene cones with reliable Santoprene™ surrounds. The unique SoloKon™ cone with its 360-degree back bracing keeps going strong when the bass gets heavy, while perimeter venting in the strong steel basket keeps the voice coils cool for dependable performance.

Kicker CompVR subs let you kick out the jams without tearing a hole in your wallet. These subs handle plenty of power, and get their fierce sound from tough, injection-molded polypropylene cones with reliable Santoprene™ surrounds. The unique SoloKon™ cone with its 360-degree back bracing keeps going strong when the bass gets heavy, while perimeter venting in the strong steel basket keeps the voice coils cool for dependable performance.

The 10CVR104 10" sub sports dual 4-ohm voice coils that give you more wiring options when setting up your system. The sub's cool-looking black finish highlights the potent low end you'll hear and feel. Boat owners: Kicker certifies the CompVR subs for marine use, so you can generate some serious bass waves out on the water.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.


Priced per speaker

This sub is great, and if you have a 2 ohm stable amp, you can run both voice coils in a parallel circuit and get alot of power out of this sub. I'm very happy with this product and would highly recommend it to anyone looking for great hard hitting bass at a resonable price.

Scott A, Paducah, KY

What's in the Box:

  • One 10" dual voice coil subwoofer
  • Owner's Manual
  • 2 Large Kicker decals
  • 2 Small Kicker decals

Product Highlights:

  • 10" subwoofer with dual 4-ohm voice coils
  • injection-molded polypropylene cone
  • ribbed Santoprene rubber surround
  • power handling: 50-400 watts RMS (200 watts per coil)
  • 800 watts peak power handling
  • frequency response: 25-500 Hz
  • sensitivity: 83.6 dB
  • top-mount depth: 5-1/2"
  • sealed box volume: 0.8-3.0 cu. ft.
  • ported box volume: 1.25-1.75 cu. ft.
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Kicker 10CVR104 Reviews

Average Customer Review(s):

(5 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
e.g., "https://youtu.be/o79TWHh598U"
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.


<< >>
Details

Hands-on research

Product Research

Features
Enclosure Compatibility

Features

Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.

Cone Design: The Comp VR's super-rigid injection-molded polypropylene cone features 360-degree back bracing to completely eliminate flex and distortion.

Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.

Spiralead Tinsel Leads: The Comp VR features durable Spiralead tinsel leads, which are woven into the woofer's progressive-roll polycotton spider, for added strength and reliability.

Basket and Motor Assembly: The strong steel basket features perimeter venting to help cool the high-temperature voice coil wires and prevent breakdown. The overall motor structure design is based on technology found in Kicker's flagship Solo-Baric line of subwoofers, and allows the sub to handle more power and take more abuse. The high-mass solid pole piece removes potentially damaging heat.

Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.

Break-in Period: Due to the complex nature of Kicker Comp VR speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.

Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.

Enclosure Compatibility

Power Handling: The power handling specifications differ according to the type and size of the enclosure. The power handling specifications assume that both voice coils are in use. Note: Both voice coils in a dual voice coil speaker should always be connected.

Recommended Sealed Box Volume:

  • Compact (minimum enclosure volume): 0.8 cu/ft; the woofer can handle up to 400 watts RMS (200 watts per voice coil)
  • SQ (maximum enclosure volume): 3.0 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)

Recommended Vented Box Volume:

  • Compact: 1.25 cu/ft; 2" x 10.5" port opening; 20" port depth; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
  • SQ: 1.75 cu/ft; 2.5" x 10.5" port opening; 20" port depth; the woofer can handle up to 300 watts RMS (150 watts per voice coil)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles
;