Overview: The Kicker PXi50.2 is a simple 2-channel amplifier
that allows you to listen to your iPod or iPhone in a vehicle without a built-in
music source. This Amplified Controller for iPod and iPhone can be installed in
boats, ATVs, utility vehicles, golf carts, tractors, snowmobiles, hot rods, motorcycles,
and riding lawnmowers. The PXi50.2 provides a 5-volt fast-charge current for the
iPod/iPhone, and pause playback when power is off.
Components: The PXi50.2 consists of the following
- Amplifier: A simple 2-channel amp with a
weather-resistant cover and multiple 4" pigtail connections for power,
speakers, remote controller, and iPod/iPhone.
- iPod Cable: A 70" cable with a 30-pin iPod dock
connector on one end and a 13-pin DIN connector on the amp end. The amp
connection has a weather-resistant, screw-on plug.
- Remote Controller: The PXi50.2 comes with an 8-button,
weather-resistant, blue backlit remote controller and an attached 5.5'
cable. The remote controller can be mounted to a pipe or bar (1.5" diameter
max) with the supplied clamp-type mount, flush-mounted using the supplied
bracket, or surface-mounted using an adhesive or hook-and-loop fastener (not
- Wiring Harness: A 24" wiring harness that provides
power connections (constant power, switched power, ground, amp turn-on),
speaker wires for 2 speakers (speakers not included), an RCA stereo output,
and a 3.5mm auxiliary input for adding another source. Note: A
10A fuse--not included--should be placed in-line with the constant power wire.
Remote Controller: With the remote controller, you can raise
and lower the volume, change to next or previous track, select playlists, turn
shuffle on or off, and turn off the unit. Dimensions: 3.146"W x 1.568"H
x 0.601"D. If flush-mounted, the unit requires a cutout of 3.385" (86mm)
x 1.616" (41mm) with a minimum mounting depth of 0.708" (18mm).
iPod Compatibility: The PXi50.2 is compatible with the
following iPods and iPhones:
- iPod touch: 1st generation (8GB, 16GB, 32GB), 2nd
generation (8GB, 16GB, 32GB), 3rd generation (32GB, 64GB), 4th generation
(8GB, 32GB, 64GB)
- iPod classic: 160GB (2009), 160GB (2007), 80GB
- iPod: 5th generation (video): 30GB, 60GB, 80GB
- iPod nano: 1st generation (1GB, 2GB, 4GB), 2nd
generation-aluminum (2GB, 4GB, 8GB), 3rd generation--video (4GB, 8GB), 4th
generation--video (8GB, 16GB), 5th generation-video camera (8GB, 16GB), 6th
generation (8GB, 16GB), 7th generation (Lightning to 30-pin adapter required
and not included)
- iPhone: iPhone (4GB, 8GB, 16GB), iPhone 3G (8GB, 16GB),
iPhone 3GS (8GB, 16GB, 32GB), iPhone 4 (16GB, 32GB), iPhone 5 (Lightning to
30-pin adapter required and not included) Note:
The PXi50.2 is not compatible with iPhone 4S (lab tested)
Additional Inputs/Outputs: In addition to the iPod
connection, the PXi50.2 has a 3.5mm auxiliary input for adding an additional
source, such as a portable CD, satellite radio, or other MP3 device. There is
also a pair of stereo RCA preamp outputs for use with additional amplifiers.
- Power Output: 15 watts RMS x 2 (4 ohms); 25 watts RMS x
2 (2 ohms)
- Frequency Response: 20Hz - 20kHz (+/- 1dB)
- RCA Preout Voltage: 2.5V RMS
- Signal-to-Noise Ratio: 90dB
- Max Current Draw: 10A
- Aux-Input Sensitivity: 500mV to 1.75V
- iPod Charging: 5V @ 1A
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.