Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Kicker Solo-Baric L7 Series 11S12L72
12" subwoofer with dual 2-ohm voice coils
Item #: 2061S12L72
This item is no longer available.
Kicker Solo-Baric L7 Series 11S12L72
Our take on the Kicker Solo-Baric L7 Series 11S12L72 by Crutchfield's John Pollard
Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.
The Solo-Baric L7 Series 11S12L72 12" subwoofer features an injection-molded polypropylene cone that works with a tough Santoprene rubber surround to dish out monster bass in a sealed or ported enclosure. Its unusual shape and black finish make a strong style statement, and you can add an optional grille to further enhances its looks. This sub packs dual high-temperature 2-ohm voice coils, giving you the flexibility to build a multiple sub setup or to draw more power from your amp with a low-impedance load.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
What's in the Box:
- One square 12" dual 2-ohm voice coil subwoofer
- Owner's manual (English/ Spanish/ German/ French)
- 2 Kicker decals
- Template on box lid
- 12" subwoofer with dual 2-ohm voice coils
- square SoloKon polypropylene cone with Santoprene rubber surround
- aluminum basket
- power range: 100-750 watts RMS (375 watts per voice coil)
- peak power: 1,500 watts
- frequency response: 20-100 Hz
- sensitivity: 86.9 dB
- mounting depth: 6-3/4"
- sealed box volume: 1.25-2.0 cubic feet
- ported box volume: 1.75-3.25 cu. ft.
- warranty: 1 year
- Our 60-day money-back guarantee
Features and Specs
|Ideal Sealed Box Volume (cubic feet)||N/A|
|Ideal Ported Box Volume (cubic feet)||N/A|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
86.9 dB at 1 watt
|Frequency Response||20 - 100 Hz|
|RMS Power Range (Watts)||100-750|
|Peak Power Handling (Watts)||1500|
|Top Mount Depth (inches)||6 3/4|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||11 1/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: For increased system flexibility, the woofer has two 2 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 1 ohm load. When the voice coils are wired in series, the woofer presents a 4 ohm load.
Square Design: By making the Solo-Baric square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the Solo-Baric L7 moves more air, resulting in louder, deeper bass.
Cone Material: The square SoloKon design is a unique one-piece construction, using polypropylene material that moves as a lightweight piston, for improved control. The cone remains rigid, minimizing cone flex and distortion. A rear cone brace integrates into the cone with a continuous contact perimeter weld, which improves strength and resistance to deformation under pressure.
Surround: The tough, flexible Santoprene rubber surround has a long-throw, positive-roll design, which controls extreme cone excursion and is highly tear-resistant. The corners of the surround are ribbed to ensure linear cone motion. The surround is stitched to the reinforced cone edge, making separation between them virtually impossible, even in the harshest conditions.
Spider: The woofer is equipped with a wide poly-cotton spider which easily handles high cone excursions due to its increased diameter and unique shape.
Enhanced BAM (Basket And Motor) Assembly: The Solo-Baric L7 utilizes a high strength stamped steel basket which features a low-profile open design and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports linear excursion, and helps dissipate heat from the voice coil and motor structure.
Voice Coils: The dual ultra length voice coils sustain enormous cone excursion and provide flexible impedance matching options. The high-temperature Polyimide Film Voice Coil former improves sonic and conducive properties, and prevents thermal-electrical meltdown. The voice coils are rated to 220° Celsius.
UniPlate Construction: The Solo-Baric L7 features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:
- Optimizes heat transfer efficiency for cooler operation and maximum power handling capability
- Eliminates erratic magnetic flux from the voice coil gap
- Releases pressure under the suspension for uniform cone movement and responsive low bass
- Prevents the voice coil from bottoming out and the corresponding damage
Tinsel Lead Wires: The sleeved, high-power tinsel lead wires eliminate broken leads and power loss, due to the common use of insufficient gauge lead wires. The lead wires are terminated with multiple polymer-based strain relieving mechanical fasteners.
Speaker Terminals: The terminals are spring loaded and nickel plated for solid connections with speaker wire up to 10 gauge.
Break-in Period: Due to the complex nature of Kicker Solo-Baric L7 woofers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Recommended Sealed Box Volume:
- Compact (minimum enclosure volume): 1.25 cubic feet
- SQ (maximum enclosure volume): 2.0 cubic feet
Recommended Vented Box Volume:
- Compact: 1.75 cubic feet; 2.5" x 13.25" port opening; 22.5" port length
- SQ: 3.25 cubic feet; 3" x 13.25" port opening; 14.5" port length
Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 11.048" x 11.048" square opening.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.