Crutchfield Customer Review (What's this?)
Awesome sub, sounds great!!
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Kicker builds the Solo-Baric L7 component subwoofer to deliver state-of-the-art bass. An ultra-rigid cast aluminum basket houses the patented SoloKon™ one-piece square cone to create a speaker that moves lots more air than a comparably sized round sub. The precision-built motor structure won't yield to stress, giving you chest-thumping low end that won't quit when you push your system hard.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
To drive this single subwoofer, we recommend a mono amplifier rated between 350 and 675 watts RMS at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
Average Customer Review(s):
Awesome sub, sounds great!!
|Impedance||1 ohm or 4 ohms|
|Ideal Sealed Box Volume (cubic feet)||N/A|
|Ideal Ported Box Volume (cubic feet)||N/A|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
82.37 dB at 1 watt |
|Frequency Response||28 - 100 Hz|
|RMS Power Range (Watts)||100-450|
|Peak Power Handling (Watts)||900|
|Top Mount Depth (inches)||4 3/4|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||7 1/4|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: For increased system flexibility, the woofer has two 2 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 1 ohm load. When the voice coils are wired in series, the woofer presents a 4 ohm load.
Square Design: By making the Solo-Baric square, Kicker is giving you the most possible cone area (Sd) for a given size baffle, 16% to 20% more area than a conventional round subwoofer. More cone area means the Solo-Baric L7 moves more air, resulting in louder, deeper bass.
Cone Material: The square SoloKon design is a unique one-piece construction, using polypropylene material that moves as a lightweight piston, for improved control. The cone remains rigid, minimizing cone flex and distortion. A rear cone brace integrates into the cone with a continuous contact perimeter weld, which improves strength and resistance to deformation under pressure.
Surround: The tough, flexible Santoprene rubber surround has a long-throw, positive-roll design, which controls extreme cone excursion and is highly tear-resistant. The corners of the surround are ribbed to ensure linear cone motion. The surround is stitched to the reinforced cone edge, making separation between them virtually impossible, even in the harshest conditions.
Spider: The woofer is equipped with a wide poly-cotton spider which easily handles high cone excursions due to its increased diameter and unique shape.
Enhanced BAM (Basket And Motor) Assembly: The Solo-Baric L7 utilizes a high strength stamped steel basket which features a low-profile open design and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports linear excursion, and helps dissipate heat from the voice coil and motor structure.
Voice Coils: The dual ultra length voice coils sustain enormous cone excursion and provide flexible impedance matching options. The high-temperature Polyimide Film Voice Coil former improves sonic and conducive properties, and prevents thermal-electrical meltdown. The voice coils are rated to 220° Celsius.
UniPlate Construction: The Solo-Baric L7 features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:
Tinsel Lead Wires: The sleeved, high-power tinsel lead wires eliminate broken leads and power loss, due to the common use of insufficient gauge lead wires. The lead wires are terminated with multiple polymer-based strain relieving mechanical fasteners.
Speaker Terminals: The terminals are spring loaded and nickel plated for solid connections with speaker wire up to 10 gauge.
Break-in Period: Due to the complex nature of Kicker Solo-Baric L7 woofers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speakers very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Recommended Sealed Box Volume:
Recommended Vented Box Volume:
Cutout: The woofer will not mount in a standard enclosure with a round cutout. Instead, the woofer must be mounted in an enclosure with a 7.211" x 7.211" square opening.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what will fit and what you will need for an installation in your vehicle. [ Kenny Feb 18, 2017 ] Staff
Regardless of wiring configuration the power handling of this subwoofer is 100-450 watts RMS (225 watts per voice coil). For help choosing a matching amp, I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. [ Jeff Jul 17, 2015 ] Staff