Polypropylene Woofer Cones: The Kicker CS-series speakers
feature durable polypropylene woofer cones, resistant to the moisture and temperature
extremes found in automotive applications.
Ribbed Polyester Foam Surrounds: The ribbed polyester foam
surrounds allow extended cone excursion for additional bass output and higher
Tweeter Mounting Options: The tweeters come with brackets
to allow multiple mounting configurations: flush-mounted, angled flush-mounted
(approximately 10°), and angled surface-mounted (approximately 15°).
| ||Flush Mount||Angled Flush Mount||Angled Surface Mount|
|Depth||0.532"||0.612"||0.554" (screw depth)|
Crossovers: The component system includes passive 2-way
crossover networks for a seamless transition between the woofers and tweeters.
The slope is 12dB per octave (both high pass and low pass) and the crossover
point is 4000 Hz. A switch on each crossover allows you to set the tweeter
output; 0 dB, +3 dB, or +6 dB. The crossovers' input and output wires are
attached; the woofer output has quick slide terminals that connect directly
to the woofer and the tweeter output has bullet terminals that mate to the
terminals on the tweeter wires. The crossovers' dimensions are:
- Length: 4.595"
- Width: 2.463"
- Height: 1.004"
Woofer Mounting: In addition to fitting standard 6-1/2 and
4-hole 6-1/2 applications, the woofer also has a standard 6-3/4 bolt pattern.
However, if mounted in a 6-3/4 location the holes for the smaller pattern create
an air leak, which should be sealed using a speaker baffle, or something similar.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.