Skip Navigation

Kicker 40DCWR122

Ported enclosure with dual 12" CompR subwoofers

9 Reviews | 12 questions - 13 answers

Watch a first-look video

Item # 2064DWR122

This item is no longer available.

Shop all Subwoofer Boxes

Overview

Our take on the Kicker 40DCWR122

Kicker's 40DCWR122 loaded enclosure puts a pair of thumping 12" CompR subs behind your music. The rugged ported box was designed specifically for the subs, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.

A match made in heaven...or Oklahoma

Kicker's 40DCWR122 loaded enclosure puts a pair of thumping 12" CompR subs behind your music. The rugged ported box was designed specifically for the subs, so you can count on getting maximum performance, no matter what kind of tunes you enjoy.

Side-view of Kicker 40DCWR122 dual 12" sub enclosure

The specially designed port gives you more bass without sounding sloppy.

Two hard-hitting CompR subs

Each 12” CompR subwoofer features a tough, polypropylene cone that stays rigid during intense play sessions so you hear accurate bass. A custom-designed back and top plate give the woofers plenty of room to travel, while the durable rubber surround helps to control cone movement during a heavy workout. These subs use extensive venting in their heavy steel baskets to shrug off heat, so you can count on reliable performance.   

Heavy-duty enclosure

Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier. This Kicker will handle up to 1000 watts RMS, so make sure you pick an amp that'll make those CompR subs happy.

Very good looking subs, pound even better than they look. Have them hooked up to the cx1200.1 and even with the amp turned down they pounded plenty for me. Turned the amp all the way up after break in period of two weeks and about crapped my pants.

Graham, Paris, IL

Featured Video:

What's in the Box:

  • Ported enclosure loaded with two 12" CompR subwoofers
  • Specification and mounting information

Product Highlights:

  • ported enclosure with two 12" CompR subwoofers
  • medium-density fiberboard construction covered with carpet
  • 2-ohm total impedance
  • power handling: 200-1000 watts RMS (2000 watts peak power)
  • frequency response: 25-500 Hz
  • sensitivity: 98 dB
  • 31-7/8"W x 16"H x 16-7/16"D1 x 13-7/16"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Kicker 40DCWR122 Reviews

Average Customer Review(s):

(9 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Woofer Size (inches) 12 x 2
Woofer Material Inject-Molded Poly
Enclosure Type Ported
Color Charcoal Gray
Pieces in System 1
Width (inches) 31-7/8
Height (inches) 16
Depth (inches) 17-3/8
Second Depth (inches) 14
Connector Type Spring post
Frequency Response 25-500 Hz
Power Range (Watts RMS) 1000
Maximum Wattage 2000
Sensitivity 98 dB
Impedance 2 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year

Product Research

Features

Wire Terminal: The two dual voice coil subwoofers are internally wired to present a 2Ω load to the single pair of spring post wire terminals.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Cause it's pretty [ Cristine  Jan 10, 2016 ]

12 questions already asked

The 650 watts RMS from your Alpine amp is enough to power this enclosure very well but not enough to realize its full potential (1000 watts RMS). I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Feb 27, 2016 ]  Staff
That depends greatly on the other speakers in your system and how low they are rated/crossed over to play. Ideally, you'll set the low pass for the subwoofers at or around the frequency you've set to high-pass your full-range speakers. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Feb 27, 2016 ]  Staff
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what will fit and what you will need for an installation in your vehicle. [ Kenny  Feb 04, 2016 ]  Staff
I forwarded your question to an Advisor and they responded with the following: Your Boss amp is a good match to this speaker. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Mar 27, 2015 ]  Staff
I have a amp pushing at 700 rms and these things hit hard so your 1700 rms should be fine they won't over power the subs if you keep the amp turned down a little [ BLAKE  Feb 23, 2015 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Krissy  Sep 29, 2014 ]  Staff
Gracias por su interés en efectuar sus compras con Crutchfield. Para servicio en español, por favor, contáctenos al 1-800-955-9039 y con mucho gusto uno de nuestros representantes le ayudará. [ Krissy  Aug 28, 2014 ]  Staff
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Greg  Aug 04, 2014 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Feb 24, 2014 ]  Staff
The 40DCWR122 has a single wiring terminal out for wiring at 2-ohms. Since that's what the 12CX1200.1 operates at you'll go from negative on the subwoofer input to negative of the amplifier output and do the same for the positive. You should be all set from there! [ Krissy  Feb 25, 2014 ]  Staff
A good rule of thumb for speakers is to get an amplifier that is up to twice the RMS of the speakers at the proper ohms. That amp will work perfect. It is better to over power speakers then under power them, that when speaker damage will occur. [ Matthew  Jan 28, 2014 ]
Ideally you don't want to push more than 1,600 watts RMS to these subs. If your amp is pushing out more than that, you can always set the gain down. However, with an amp that is double the power, you might want to consider an amp that will be a closer match power wise. [ Jeff  Jan 19, 2014 ]  Staff
The sub box has a single set of 2-ohm inputs. This will mean that you need to bridge a 2-channel amp. You will want to make sure your amp is 2-ohm compatible in mono. [ Jeff  Dec 16, 2013 ]  Staff
Articles