Skip Navigation

Kicker 12PX100.2

Compact 2-channel amplifier — 50 watts RMS x 2 at 2 ohms

5 Reviews | 1 question - 1 answer

Item # 206PX1K2

This item is no longer available.

Shop all Car Amplifiers

Overview

Our take on the Kicker 12PX100.2

Kicker designed the PX100.2 2-channel amplifier to work in your powersports vehicle, boat, motorcycle, ATV, golf cart, tractor, or any other vehicle using a 12-volt charging system. This weather-resistant music maker fits in the palm of your hand — or on the fairing of your bike — putting out up to 50 watts RMS per channel so you can hear your tunes clearly as you work or play outside.

Bring the music outside

Kicker designed the PX100.2 2-channel amplifier to work in your powersports vehicle, boat, motorcycle, ATV, golf cart, tractor, or any other vehicle using a 12-volt charging system. This weather-resistant music maker fits in the palm of your hand — or on the fairing of your bike — putting out up to 50 watts RMS per channel so you can hear your tunes clearly as you work or play outside.

Optimized for 2-ohm speakers

The PX100.2 employs Kicker's Direct Amp Technology™, using the vehicle's electrical system as its power supply so the amp will run cool even while you're pushing it hard and loud. Kicker recommends the PS5250 5-1/4" Powersports speakers as the perfect match for the PX100.2, as their 2-ohm impedance pulls maximum power from this dynamic little amp.

Great amps I put them in a Polaris slingshot they are perfect Small compact & water proof

Anonymous, Lenexa Ks

What's in the Box:

  • 2-channel amplifier
  • 12" Input/Output harness
  • In-line fuse holder
  • One 10-amp ATO fuse (installed)
  • Four 1" Self-tapping screws
  • Two 14-16 Gauge crimp-on ring terminals
  • Two 11-1/2" Zip-ties
  • Owner's manual (English/ Spanish/ German/ French)

Product Highlights:

  • 2-channel amplifier (works in any vehicle with a 12-volt charging system)
  • 25 watts RMS x 2 at 4 ohms (50 watts RMS x 2 at 2 ohms)
  • Direct Amp Technology results in 90% efficiency
  • selectable high-pass filter (off, 100 Hz, 250 Hz at 24 dB/octave)
  • preamp and speaker-level inputs (speaker-level input requires an optional adapter)
  • 14- to 10-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 10A x 1
  • 7-3/8"W x 2-1/16"H x 3-1/2"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

Kicker 12PX100.2 Reviews

Average Customer Review(s):

(5 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Overview: PX series amplifiers are designed for motorized vehicles with small battery/charging systems; Kicker's new Direct Amp Technology uses the vehicle's charging system as its power supply, offering 90-percent efficiency. As a result, the PX100.2 draws a maximum of less than 10 amps and outputs solid power without taxing the limited charging capacity found on motorcycles, utility or other vehicles. Little ventilation is required and with its small footprint, the PX100.2 can be installed in motorcycle saddle bags or fairings, glove compartments, or other small spaces.

Power Output: The PX100.2 is a stereo amplifier and is 2Ω stable. The power output is 25 watts RMS x 2 at 4Ω (<1% THD+N) and 50 watts RMS x 2 at 2Ω (< 1% THD+N). The amp was designed to power one or two pair of PS5250 full range speakers (available in 4Ω and 2Ω), but it can also be used with other speakers.

Controls: The controls are under a rubber cover:

  • High Pass Crossover: two switches:
    • on/off
    • 100 Hz / 250 Hz; select crossover frequency
  • Input Level: select high (speaker level) or low (line level)
  • Auto Turn-on: select 12V (amp turns on when +12 volts is applied to the remote wire in the harness) or DC (amp turns on when a 6 volt surge is detected from a speaker level source)
  • Gain: rotary knob; adjust to match the output of the source unit

Wiring: All the wiring connections are in one Molex plug (power, ground, remote turn-on, speaker output, RCA input).

Speaker Level Input: When connecting a speaker level source, cut the RCA plugs off and splice into the remaining wire. If you prefer not cutting the RCA plugs off, use the Kicker KiSL speaker level to RCA adapter (item number 206KiSL, sold separately).

Differential Input: The differential input circuit reduces the likelihood of picking up any engine noise.

Weather Resistant: The PX Amps are weather-resistant, using a conformal-coated circuit board for protection against the elements. They also include stainless-steel mounting hardware.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you. [ Jeff  Jan 17, 2014 ]  Staff
Articles