Overview: PX series amplifiers are designed for motorized
vehicles with small battery/charging systems; Kicker's new Direct Amp Technology
uses the vehicle's charging system as its power supply, offering 90-percent
efficiency. As a result, the PX200.1 draws a maximum of less than 15 amps and
outputs solid power without taxing the limited charging capacity found on
motorcycles, utility or other vehicles. Little ventilation is required and
with its small footprint, the PX200.1 can be installed in motorcycle saddle
bags or fairings, glove compartments, or other small spaces.
Power Output: The PX200.1 is a mono amplifier designed to power
one or two CVT651 1Ω, 6-3/4" subwoofers. The power output is 100 watts RMS
at 1Ω (<1% THD+N) and 200 watts RMS at 0.5Ω (< 10%
Controls: The controls are under a rubber cover:
- Low Pass Crossover: 100 Hz or 250 Hz;
low pass crossover cannot be bypassed
- Bass Boost: on/off; 6 dB boost centered
at 60 Hz
- Input Level: select high (speaker level)
or low (line level)
- Auto Turn-on: select 12V (amp turns on
when +12 volts is applied to the remote wire in the harness)
or DC (amp turns on when a 6 volt surge is detected from a
speaker level source)
- Gain: rotary knob; adjust to match the
output of the source unit
Wiring: All the wiring connections are in one Molex plug (power,
ground, remote turn-on, speaker output, RCA input).
Speaker Level Input: When connecting a speaker level source,
cut the RCA plugs off and splice into the remaining wire. If you prefer not
cutting the RCA plugs off, use the Kicker KiSL speaker level to RCA adapter
Differential Input: The differential input circuit reduces
the likelihood of picking up any engine noise.
Subsonic Filter: The PX200.1 includes a 24 dB/octave subsonic
filter, fixed at 40 hertz.
Weather Resistant: The PX Amps are weather-resistant, using
a conformal-coated circuit board for protection against the elements. They also
include stainless-steel mounting hardware.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.