Overview: The TERK XM6 is the perfect high-performance antenna
for your XM home receiver or Plug & Play system. The XM6 outdoor satellite radio antenna is a low-profile, high-performance
antenna designed specifically for XM Satellite Radio reception. The XM6 has a universal mounting bracket that can be installed to a wall, roof,
or mast (including a satellite dish mast). The antenna itself has a threaded
F-type coaxial connector designed for use with a standard RG-6 coax cable (not
included). The included F-type to SMB adapter plugs into the XM tuner. Terk
recommends not exceeding 100' cable length without a line amplifier.
System Requirements: In
addition to this antenna, you must have an XM tuner
and subscription to XM Satellite Radio to receive XM programming.
Compatibility Note: The XM6 is compatible with the XM Direct
2 Home Tuner, which
is used with XM Ready home receivers. The XM6 plugs directly into the XM Direct
2 Home Tuner using the supplied F-to-SMB adapter.
Antenna Element Housing:
- Width: 2.987"
- Height: 1.429" (plus the
- Depth: 3.537"
- Width: 3.336"
- Height: 4.724"
- Depth: 2.077"
Extension From Mounting Surface
- Maximum Arm Extension:
- Minimum Arm Extension:
- Frequency: 2332.5-2345 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization: LHCP
- Gain: 30 dB, typical
- Noise Figure: 1 dB,
- Current Drain: 70 mA,
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.