Overview: The XM-EXT50 is a 50' extension cable with an in-line
amplifier for use with XM antennas; the kit is not compatible with Sirius satellite
radio antennas. It can be used for XM mobile or home receivers.
Cable and Connector: The XM-EXT50 antenna extension cable is a
single 50' coaxial cable with single SMB connectors (without the plastic FAKRA-type
plastic housing) on each end; the input (antenna end, with the amplifier) is a male
SMB and the output (tuner end) is a female SMB. The extension cable is equipped an
in-line signal amplifier (10dB gain) on one end with a weather-resistant rubber
boot. The other end plugs directly into single-input XM Satellite Radio receivers.
Note: For connections to dual-input XM receivers, the Terk XM-SP
dual-input splitter (item number 209XMSP), or the American International XM-1DAS
(item number 003XM1DAS) is required.
Extension Limits: No more than 2 extension kits should be
Cable Care: The full length of the extension cable should be
used--it should not be cut, spliced or otherwise shortened. The cable should not
be kinked. You should avoid bending the cable in a radius of less than an inch.
The cable can be used outdoors, but it should not be exposed to severe environmental
conditions. The in-line signal amplifier should be mounted upright, oriented so the
label is readable right side up.
- Cable Type: RG-58
- Frequency: 2300 to 2400 MHz
- Amplifier Gain: 10dB +/- 1dB
@ 2300 MHz
- Return Loss: -10dB
- Input: male SMB
- output: female SMB
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.