General Overview: This is a
complete multi amplifier wiring kit that includes the power and ground wiring and accessories
required to install up to four amplifiers. It does not include speaker wire or signal
In-line Fuse Holder: The
included in-line fuse holder is waterproof and comes with an 80-amp AGU-type
fuse. The wire is already installed in the fuse holder, but the fuse is not. The holder has setscrew input and output connections, both of which will
accept 4 gauge wire. The fuse holder is 3.802" Long, 1.875" Wide and
1.015" Tall, and it has two mounting
holes (mounting screws not included).
Distribution Block: The
distribution block has a setscrew input for the 4 gauge wire, a 5mm Allen wrench
(not included) is required for the setscrew. It has four set screw outputs for 8 gauge
wire, a 3mm Allen
wrench (not included) is required for the setscrews. The block measures 2.627"
Long, 2.266" Wide and 1.065" Tall, and it has two screw
holes for mounting (screws not included).
Power/Ground Cables: The 4 and
8 Gauge power cables are covered with translucent red insulation. The 8 Gauge ground
cable is covered with clear insulation.
Remote Turn-on Wire: The remote
turn-on wire is 18 Gauge and is covered with blue insulation.
Crimp-on Terminal Dimensions:
- Power Ring Terminal (installed):
W=0.651", inner diameter 8mm (0.315")
- 8 Gauge Ring Terminals: W=0.476",
inner diameter 5mm (0.197")
- 8 Gauge Spade Terminals:
W=0.332", prong spacing 0.151"
- 18 Gauge Spade Terminals:
W=0.279", prong spacing 0.145"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.