General Overview: This is an amplifier wiring kit that
includes the power and ground wiring and accessories required to install a car
amplifier with a amp rating of up to 400 watts. It does not include speaker wire
or signal cable.
CCA Power/Ground Cable: The power and ground cables are
built from 4256 individual strands of the purest oxygen-free, fine-stranded
copper. The cables feature highly flexible Rope-Lay wire construction to prevent
kinking and provides more installation options. The Poly Flex insulation offers
protection from heat, and chemical reactions from gasoline, battery acid and
oil. This 8-gauge wire has a temperature rating of 105 degrees Celsius.
In-line Fuse Holder: The supplied in-line AFS fuse holder
features an impact-resistant clear housing to protect the fuse while allowing
easy fuse inspection. The set screw inputs and outputs accept bare 4 gauge wire.
It has a mounting base plate and mounts with four screw holes for mounting
(screws not provided). The Three-Stage Watertight System utilizes four O-rings
for a perfect waterproof seal. The solid machined contacts have a silver-plated
AFS Fuse: The supplied 80-amp AFS fuse is to be installed in the
fuse holder. Be sure the 80-amp AFS fuse rating is adequate for your installation. (AFS
fuses are available up to 150 Amps, if needed.)
Accessories: The wiring kit also includes a 16' spool of
18-gauge blue turn-on wire, two 4-gauge spade terminals, one 18-gauge spade
terminal, and an 18-gauge butt connector.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.