Skip Navigation

MTX ThunderForms

1995-2002 Chevrolet S-10 Regular Cab / GMC Sonoma / Isuzu Hombre Regular Cab (Charcoal)

Find what fits your vehicle

Can't find your exact vehicle?

Item # 236S21010C

This item is no longer available.

Shop all Custom Subwoofer Boxes

Overview

Our take on the MTX ThunderForms

There's a Thunderstorm in the forecast, and it's headed for the wasted space in your vehicle. ThunderForms preserve all the legroom in your pickup truck. Each ThunderForm is an acoustically-designed, non-resonant, airtight enclosure, with the correct internal volume to yield optimum bass response from its subwoofer.

There's a Thunderstorm in the forecast, and it's headed for the wasted space in your vehicle. ThunderForms preserve all the legroom in your pickup truck. Each ThunderForm is an acoustically-designed, non-resonant, airtight enclosure, with the correct internal volume to yield optimum bass response from its subwoofer.

So what makes ThunderForms different than a standard sub box? MTX engineers design each ThunderForm enclosure for optimum performance in your specific vehicle's acoustic space. Using state-of-the-art rotational molding techniques, and exotic high-density polyethylene, MTX creates a sculpted masterpiece of a sub box, beautifully finished to blend with your interior. And they sound as good as they look, delivering bass that's tight, accurate, hard-hitting, and way down low.

This molded MTX ThunderForm comes loaded with a premium-quality 10" Thunder 6000A speaker and mounts behind the driver's seat on the 1995-2002 Chevrolet S-10, GMC Sonoma, and Isuzu Hombre regular cab truck. For the ultimate in Thundering bass, drive one with an MTX Thunder amp. 2-year limited warranty.

What's in the Box:

  • Charcoal ThunderForm with pre-installed 10" Thunder 6000A subwoofer
  • 2 Self-tapping screws
  • 2 Flat washers
  • Manual
  • "MTX Audio" sticker
Reviews
Details

Hands-on research

Product Research

Features
Installation
Note

Features

Compatibility: This enclosure mounts behind the driver's seat in your 1995-2002 Chevrolet S10 regular cab truck, GMC Sonoma, or Isuzu Hombre.

Thunder 6000A Woofer: This molded MTX ThunderForm comes loaded with a 10" Thunder 6000A woofer.

Mica-filled Polypropylene Cone: The woofer cone is made of Mica-filled poly with a bright aluminum finish and 8 stiffening ribs for improved cone stiffness and higher mechanical power handling.  Concentric rings are molded into the cone and dust cap surfaces to give them a machined appearance. The "MTX Audio" is embossed on the poly dust cap.

NBR Surround: The woofer is made with a one-piece NBR (Nitrile Butadiene Rubber) surround and gasket combination.  When bottom-mounting the woofer, the one-piece surround and gasket make an air-tight seal, to prevent any loss of performance due to air leaks around the woofer.  When the woofer is top-mounted, the one-piece surround and gasket combination enhances the overall cosmetic appearance of the woofer. NBR has the added benefit of being resistant to ozone and UV rays for extreme durability.

Oversized Magnet Structure: This woofer has an oversized (37 oz.) magnet structure, with a 2" voice coil.

Asymmetrical Linear Drive: This system improves linearity and permits high output with low distortion.

Spider Plateau Venting: Heat from the voice coil is vented through metal-mesh covered vents that surround the back of the spider.

Molded Enclosure: The molded, high-density polyethylene resin enclosure resists flexing and dampens resonance.

5-way Binding Posts: The gold-plated 5-way binding posts will accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs.

Installation

Mounting Location: This enclosure mounts behind the driver's seat in your 1995-2002 Chevrolet S10 regular cab truck, GMC Sonoma, or Isuzu Hombre.

Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in a particular vehicle, so the enclosure will fit properly in only one specific location.

Tools Required: You will need the following tools to install this enclosure:

  • Powered screwdriver
  • Wire cutters
  • Terminal crimpers
  • #2 Phillips head bit
  • 5/16" wrench

Note

Sensitivity: In the features and specs section, the subwoofer sensitivity is automatically rounded down to 85dB. The woofer actually has a sensitivity rating of 85.2dB.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles
;