Thunder 6000 10" sub
these speakers really look nice and thump pretty hard
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item #: 236T6104A
This item is no longer available.
Smart looks and smarter sound that's the story of the MTX Thunder6000 series T6104A 10" subwoofer. An mica-filled poly cone is butressed with eight stiffening ribs, so it keeps its shape even when you pour on the power! The cones are coated with spun aluminum for a "bulletproof" appearance.
The NBR (Nitrile Butadiene Rubber) surround and gasket are fabricated as a single piece to prevent air leaks around the woofer. Spider Plateau Venting draws cool air into the speaker for better performance. An oversized magnet structure and 2" four-layer voice coil will electrify your ears with outstanding output.
Priced per speaker
Average Customer Review(s):
these speakers really look nice and thump pretty hard
|Cone Material||Mica-filled poly|
|Surround Material||Nitrile Butadiene Rubber|
|Ideal Sealed Box Volume (cubic feet)||0.75|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Port diameter (inches)||3|
|Port length (inches)||11|
|Dual Voice Coil||No|
85.2 dB at 1 watt
|Frequency Response||31 - 150 Hz|
|RMS Power Range (Watts)||50-250|
|Peak Power Handling (Watts)||500|
|Top Mount Depth (inches)||5|
|Bottom Mount Depth (inches)||5 1/2|
|Cutout Diameter or Length (inches)||9 1/4|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
NBR Surround: The woofer is made with a one-piece NBR (Nitrile Butadiene Rubber) surround and gasket combination. When bottom-mounting the woofer, the one-piece surround and gasket make an air-tight seal, to prevent any loss of performance due to air leaks around the woofer. When the woofer is top-mounted, the one-piece surround and gasket combination enhances the overall cosmetic appearance of the woofer. NBR has the added benefit of being resistant to ozone and UV rays for extreme durability.
Mica-filled Polypropylene Cone: The woofer cone is made of Mica-filled poly with a bright aluminum finish and 8 stiffening ribs for improved cone stiffness and higher mechanical power handling. Concentric rings are molded into the cone and dust cap surfaces to give them a machined appearance. The "MTX Audio" is embossed on the poly dust cap.
Oversized Magnet Structure: This woofer has an oversized (37 oz.) magnet structure, with a 2" voice coil.
Asymmetrical Linear Drive: This system improves linearity and permits high output with low distortion.
Spider Plateau Venting: Heat from the voice coil is vented through metal-mesh covered vents that surround the back of the spider.
Enclosure Compatibility: This woofer can provide extended bass in sealed, vented and bandpass enclosures (see below for more information on enclosures).
Recommended Sealed Box Volume: The sealed box sizes recommended by MTX range from 0.5 cu/ft to 1.0 cu/ft. The sealed enclosure MTX highlights on their spec sheet is a 0.75 cu/ft enclosure, so this is the enclosure recommended by Crutchfield.
Recommended Vented Box Volume: The vented box sizes recommended by MTX range from 1.0 cu/ft to 2.0 cu/ft. The vented enclosure MTX highlights on the woofer specification sheet is a 1.5 cu/ft enclosure, so this is the enclosure recommended by Crutchfield. One 3" diameter x 11" long port should be used with a 1.5 cu/ft enclosure; a 1.5 cu/ft enclosure with a 3"x 11" port has a tuning frequency of 32 Hz.
Recommended Single Reflex Bandpass Volume: The bandpass box sizes recommended by MTX range from 0.98 cu/ft to 1.68 cu/ft. MTX highlights two bandpass enclosures on the woofer specification sheet. One highlighted enclosure has an "S" value of 0.6, and the other highlighted enclosure has an "S" value of 0.7. The highlighted bandpass enclosure with an "S" value of 0.6 is a 1.11 cu/ft enclosure, with a sealed chamber volume of 0.37 cu/ft, a vented chamber volume of 0.62 cu/ft and a single 4" diameter x 9.5" long port. The enclosure with an "S" value of 0.7 is a 1.40 cu/ft enclosure, with a sealed chamber volume of 0.44 cu/ft, a vented chamber volume of 0.84 cu/ft and a single 4" diameter x 7.75" long port.
Note: The bandpass enclosure with the higher "S" value produces a more narrow bandwidth with better transient response; the enclosure with the lower "S" value produces a wider bandwidth at the expense of transient response.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.