Skip Navigation

Pro-Ject RPM 3 Carbon

Manual belt-drive turntable with pre-mounted cartridge (Gloss White)

3 Reviews

Item # 252RPM3CGW

Low Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat Email

Overview

Our take on the Pro-Ject RPM 3 Carbon

For an outstanding listening experience, give Pro-Ject's RPM 3 Carbon a spin. Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound. Precise construction and careful attention to design and materials allow this player to retrieve ear-opening layers of sonic detail from the grooves of your favorite albums. Its striking appearance and high-gloss piano lacquer finish make this 'table look every bit as good as it sounds.

Savor the sweet sounds of vinyl

ProJect RPM 3 Carbon and Sumiko Blue Point No 2 cartridge

This Pro-Ject RPM 3 Carbon comes equipped with the high-performance Sumiko Blue Point No. 2 moving coil cartridge.

For an outstanding listening experience, give Pro-Ject's RPM 3 Carbon a spin. Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound. Precise construction and careful attention to design and materials allow this player to retrieve ear-opening layers of sonic detail from the grooves of your favorite albums. Its striking appearance and high-gloss piano lacquer finish make this 'table look every bit as good as it sounds.

A focus on performance

The RPM 3 Carbon's unusual boomerang-shaped MDF chassis does more than just look cool — it also resists vibrations that can smear sonic detail. The 'table rests on three vibration-damping cone feet that further reduce noise. The heavy MDF platter is topped by an integrated mat made from recycled record vinyl, and spins on an inverted bearing with a ceramic ball for smooth, silent rotation and reduced rumble. The motor is driven by an ultra-precise AC generator with a DC power supply for enhanced speed stability. The isolated motor assembly and belt drive system keep motor vibration away from the chassis, preventing noise from being transferred to the cartridge.

The RPM 3 Carbon's advanced, S-shaped 10" tonearm boasts carbon fiber, aluminum, and resin construction for superior rigidity, strength, and maximum internal resonance damping. A damped, offset counterweight design lowers the arms center of gravity to improve tracking — a big help with warped records. And the RPM 3 Carbon comes outfitted with an easy-to-use magnetic anti-skating mechanism for faster setup.

Includes a Sumiko Blue Point No.2 phono cartridge

A longtime favorite with audiophiles, the Sumiko Blue Point No. 2 phono cartridge comes pre-mounted and ready to go on the RPM 3 Carbon. This high-output moving coil cartridge offers outstanding performance, serving up the warm, rich sound of vinyl with remarkably smooth tonal balance plus plenty of musical detail and resolution. The Blue Point No. 2 also boasts a nude-mounted, elliptical diamond stylus to minimize friction and wear on your treasured LPs, while providing a longer usable lifespan. Its high-output voltage design means direct compatibility with the phono inputs on many receivers and amps, eliminating the need for an additional moving-coil preamp.

Product Highlights:

  • 12" resonance-optimized medium density fiberboard (MDF) platter with integral recycled record vinyl mat
  • precision inverted bearing with ceramic ball for smooth platter rotation, greater speed accuracy, and low wow-and-flutter
  • central mass point optimizes vibrancy behavior
  • extra-long 10" one-piece S-shaped tonearm made from carbon fiber, aluminum, and resin for better rigidity and internal vibration damping, plus reduced tracking angle error
  • includes pre-mounted Sumiko Blue Point No.2 high-output moving coil cartridge
  • tonearm offers adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge-matching
  • medium density fiberboard (MDF) plinth with three vibration-absorbing cone feet
  • 15-volt AC motor driven with ultra-precise AC generator and DC power supply
  • magnetic anti-skating for easy setup and more precise tracking
  • isolated motor assembly optimized for low noise and speed stability
  • manual operation with silicone-damped tonearm lift
  • 33-1/3 and 45 rpm speeds with manual speed change
  • speed drift: ±0.19% at 33 RPM, ±0.08% at 45 RPM
  • wow and flutter: ±0.14% at 33 RPM, ±0.11% at 45 RPM
  • signal-to-noise ratio: 71 dB
  • detachable RCA audio cable included
  • tracking force gauge included
  • external power supply reduces likelihood of electro-mechanical interference
  • dust cover not included
  • weight: 12.1 lbs.
  • 14-15/16"W x 4-7/8"H x 13-1/2"D
  • warranty: 2 years (1 year warranty for the supplied cartridge)
  • Our 60-day money-back guarantee
  • requires a phono preamp or phono input on receiver or preamplifier

What's in the Box:

  • Turntable (tonearm & cartridge installed)
  • Platter w/ integrated vinyl mat
  • Motor
  • AC power supply (attached 6' DC cord)
  • 3 AC plug adapters (US/EU/UK)
  • Drive belt
  • 47" RCA stereo cable (with ground wire)
  • 45 RPM adapter
  • Counterweight
  • 3 Protective discs
  • 2 Hex-keys
  • Stylus Pressure Gauge
  • Two-Point Cartridge Alignment Protractor
  • Instructions For Use booklet
  • Warranty Information
Reviews

Pro-Ject RPM 3 Carbon Reviews

Average Customer Review(s):

(3 Reviews)

Great Design...Poor Execution!

Steve from Lexington, VA on 1/14/2018

Crutchfield Customer Review (What's this?)

I had high expectations for this turntable (especially for this price) but was disappointed right out of the box. The tonearm was loose on the plinth and flopped around. Found a screw to tighten and that solved that problem. But the cueing lever assembly is so poorly made that it shakes the tonearm while raising or lowering it. You can't accurately lower it to the record. Also, it is almost impossible to accurately adjust the counterweight for the correct tracking force. This turntable appears to be the same as a RPM 1 Carbon with a $450 cartridge. I really expected more from a turntable at this price point. The good news is that Crutchfield offered to exchange it with no hassle so a Pro-Ject Debut Carbon Esprit SB is on the way. Once again, excellent customer service from Crutchfield.

Pros: Great design

Cons: Inferior tonearm for a turntable at this price

Great sound

Tony from Las Vegas, NV on 9/22/2017

Crutchfield Customer Review (What's this?)

Almost ready to go right out of the box. Securely packaged, easy set up and great sound.

Pros:

Cons:

Pro-Ject RPM 3 Carbon

Anonymous from Ocala, FL on 7/19/2017

Crutchfield Customer Review (What's this?)

Turntable is beautiful!! Just the looks alone make it 5 stars but I had a problem with the tonearm; it came disassembled at the base - the pivot. I figured out how to put it back together but it took some time and a lot of patience. The owner's manual did not address this at all. I was afraid of pulling some wires during the process, as the wires are extremely delicate.

Pros: Beautiful turntable, looks fantastic

Cons: Tonearm became disassembled somewhere between the factory and its arrival to me

Details

Hands-on research

Features and Specs

Features
Operation Manual
Speeds 33-1/3, 45
Cartridge Type MC
Phono Preamp No
USB Output No
Pitch Control No
45 RPM Adapter Yes
Specs
Signal to Noise Ratio 71
Wow and Flutter 0.14
Weight 12.125 lbs.

Product Research

Features

Precision Belt-Drive Using Synchronous Motor: The Pro-Ject RPM 3 Carbon features a precision belt-drive system using a quiet running synchronous motor. It supports both 33-1/3 and 45 rpm speeds.

Note: Not compatible with Speed Box S or Speed Box DS.

MDF Construction w/ Inverted Bearing Assembly The Pro-Ject RPM 3 Carbon features three-point MDF (medium density fiber) plinth for exceptional stability. The low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. The platter is made from 300mm MDF and features an integrated vinyl mat.

S-Shaped Tonearm w/ Sumiko Blue-Point II MC Cartridge: A completely new designed 10" S-shaped tonearm tube is made from carbon fiber, aluminum and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strengthened, internal damping is maximized and resonances are reduced to a minimum. Fitted to the tonearm is a Sumiko Blue-Point II MC cartridge for exceptional sound quality reproduction.

Note: The Sumiko Blue-Point II MC cartridge that comes with this turntable is a "high-output" moving coil cartridge. This means it can be connected to a standard MM phono input and does not require a MC input.

Tracking Features: Additional features are a new magnetic antiskating mechanism and a TPE-damped counterweight for improved tracking.

Stereo RCA Output w/ Grounding Screw: Connection to the phono input of your amplifier can be made with connecting cables of your choice through the turntable's gold-plated stereo RCA phono jacks and grounding screw. The Pro-Ject turntable comes supplied with a 47" stereo RCA cable with ground wire.

Outboard Power Supply: An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability.

No Dust Cover: This turntable does not come with a dust cover.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Features [ G  Jul 02, 2016 ]
A beautiful work of art - coupled with a high-quality premounted Sumiko MC cartridge. I have mine sitting on an acrylic base that has inherent neon LED light...really looks BAD-ASS! [ DAVID  Aug 01, 2017 ]
Articles