Skip Navigation


In-wall power management extender system

1 Review

Item # 299MIWPKPR

This item is no longer available.

Shop all Power Protection


Our take on the Panamax MIW-POWERKIT-PRO

Run power and signal cable through the wall for a clean look

With the Panamax MIW-POWERKIT-PRO, you can send clean, noise-free AC power from a line conditioner or uninterruptible power supply to a component in another location, such as a TV in the bedroom or a ceiling-mounted projector. This system includes a dual-outlet faceplate for your TV and another device, plus an inlet faceplate and power cord for making a connection to your line conditioner. Connect the two plates via in-wall power cable for a professional-looking installation and less cable clutter. The MIW-POWERKIT-PRO also comes with two dual "signal bay" faceplates for your audio and video cables, so you can run those through the wall, too.

usage diagram

Product Highlights:

  • connects two audio/video components to a line conditioner or uninterruptible power supply in another location
  • includes one AC inlet faceplate, one dual-AC-outlet faceplate, and two dual "signal bay" audio/video cable faceplates
  • EMI/RFI noise filtration built into outlet receptacles
  • 15-amp total current capacity
  • "signal bay" faceplates include rubber grommets for the audio/video cable openings
  • compatible with optional Panamax MIW signal line modules
  • 10-foot power inlet cord
  • compatible with most standard electrical boxes — electrical boxes are not included
  • CSA-certified for safe in-home use
  • warranty: 3 years
  • Our 60-day money-back guarantee

What's in the Box:

  • MIW-Power Pro dual AC outlet
  • MIW-Power Pro AC inlet
  • 10' AC inlet cord with TwistLock plug
  • 2 Dual Signal Bays
  • 2 Plastic mounting brackets
  • 16 Flat-head screws (1-1/8" length)
  • 6 Wire nuts
  • Installation Instructions

Panamax MIW-POWERKIT-PRO Reviews

Average Customer Review(s):

(1 Review)

great kit

DaveS from Wyckoff, NJ on 10/22/2010

Crutchfield Customer Review (What's this?)

Great kit - I used this for a recently completed TV room renovation .. looks great and much much nicer than a hole in the wall .. I like the electric power part of the kit, and the low power cable ports are great too .. I didn't use the plastic cutouts though, I installed regular boxes in the wall for these and they fit well .. the ones I used were also plastic (/pvc) but are full boxes that nail to studs, rather than hanging the panamax boxes on the sheetrock .. be sure to use a deep box for the AC power unit behind the TV, since the unit itself is relatively deep. I plug the power cable on this kit into a shelf mounted power conditioner, which works great..there's some redundancy b/c the panamax wall outlet has some noise conditioner in it, so it would work great on it's own without a power conditioner. the build seems very solid and so far, I'm very happy with this one!!




Hands-on research

Product Research


Overview: The MIW-Powerkit-Pro Max In-Wall System extends safe, protected AC power from Panamax Power Management components to a remotely installed flat panel TV, ceiling-mounted projector, or powered subwoofer. The inlet faceplate can be placed behind your equipment rack, and the outlet faceplate hides discreetly behind the remotely installed component for a neat, professional installation, without the bulky power strips or hanging power wires. In addition to the AC power inlet and dual outlets, two Max In-wall Dual Signal Bays are included for running your audio/video signal cables inside the wall. All of the MIW-Powerkit-Pro faceplates are compatible with standard dual gang in-wall J-boxes.

15-Amp Circuits: The MIW-Powerkit-Pro system is designed only for use with 15-Amp circuits utilizing a minimum of 14 AWG wiring.

Design: The MIW-Powerkit-Pro consists of an inlet faceplate with a TwistLock connector and dual AC outlets for extending safe, clean AC power from a Panamax power conditioning component to equipment remotely installed away from the equipment rack. The AC inlet and outlets are connected by common in-wall power wiring (i.e. Romex). A 10' AC inlet cord is provided. There are also dual low-voltage signal bays with pass-through inserts for connecting or passing through audio and video cables between the equipment rack to the remote component. Optional MIW Signal Line Modules (sold separately) can also be used with the signal bays.

AC Power Cables: The included 10' AC inlet cable has a TwistLock female plug that connects to the inlet faceplate's recessed socket. The dual AC outlets are also recessed to reduce the plug protrusion.

Note: Even with the recessed plugs, the MIW-Powerkit-Pro is not recommended for use with the Samsung TV Ultra Slim Wall Mount (305WMN1000). The wall mount reduces the gap between the TV and the wall to 5/8".

Low Voltage Signal Bays: You can use the low-voltage signal bays to pass through the component's video and audio cables. You can use the MIW Pass-Through insert, which comes installed on the mounting bracket, and cut a hole in the rubber grommet so that it fits tightly around the cable. Another option is to use a Panamax MIW signal-line module (sold separately), such as the MIW-5RCA, MIW-DATA, MIW-SVIDEO, or MIW-VGA.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.