Powered Wireless Bookshelf Loudspeakers: Each Dynaudio Xeo 2 powered wireless speaker features a 1.1" precision-coated silk soft-dome tweeter and
one 5.5" magnesium silicate polymer (MSP) mid-woofer powered by a 130 watt
digital amplifier for true high-end sound with great dynamic range, expansive
soundstage, exceptional accuracy, and a natural tonal balance. The Dynaudio Xeo
2 provides Bluetooth, analog, and digital connectivity. Each speaker will
need to be plugged into an AC outlet. However, there is no need for a physical
connection between the speakers, because one powered speaker streams to the
other powered speaker wirelessly.
Precision-Coated Soft-Dome Tweeter: Dynaudio has relied on a
silk soft-dome tweeter for recreating high frequencies since the company was
founded, continuously improving and perfecting the soft-dome principle over the
years. Dynaudio tweeter designs require a time consuming, labor-intensive
manufacturing process where the fine fabric diaphragm is shaped into a dome and
is then treated with a specially formulated coating. As a further refinement,
the tweeter's aluminum voice-coil is suspended in a magnetic oil, which
increases power handling while also improving the dome's excursion. The result
is the celebrated Dynaudio tweeter, featuring a balanced and natural frequency
- Damping Chamber: The tweeter also includes a special
damping chamber integrated into the rear of the construction, deadening any
back-wave energy through an acoustic absorber. The advantages include high
power handling and unimpeded excursion of the soft-dome dome tweeter.
- Ferrofluid Magnet: The voice coil is positioned within
the magnetic field of the tweeter magnet. When the loudspeaker reproduces
sound, the voice coil, powered by the amplifier current, moves at a speed of
up to 25,000 waves per second. To achieve a uniform movement, a magnetic
fluid called ferrofluid is used around the voice coil. Ferrofluid works like
a subtle shock absorber and eliminates excess energy. Due to the relatively
high current and extremely fast movements, the voice coil is under constant
thermal stress. The ferrofluid dissipates this heat, while also increasing
power handling capabilities. The frequency range of the tweeter can thus be
expanded while the frequency response remains smooth and linear, delivering
the highest resolution and most neutral sound reproduction.
Note: The surround of the tweeter is inversed to improve
dispersion. This leaves nowhere for the lead wires to go behind the tweeter,
so the lead wires are positioned above the surround.
Magnesium Silicate Polymer (MSP) Woofer: For bass and
midrange drivers, Dynaudio uses a proprietary composite of magnesium silicate
polymer (MSP), a material that combines low mass, high rigidity, and ideal
internal damping properties. This exclusive driver membrane is an immediately
visible and characteristic feature of Dynaudio loudspeakers. Formed in a special
manufacturing process, this membrane is a unique design with the distinctive,
geometrically optimized form of the cone further enabling smooth sound
- Aluminum Voice Coils: A distinct and major Dynaudio
innovation is the use of pure aluminum wire for voice coils. In comparison
to the more commonly used and much heavier copper alternative, aluminum
allows for more windings and extraordinarily large diameter coils that
remain extremely light. By using aluminum instead of copper for a bass
driver, it is possible to effectively double the coil's diameter without
increasing its mass. Due to the thermal properties of aluminum, cooling of
the voice coil is dramatically improved as well. In combination with the
equally light voice coil former and powerful magnet materials used in
Dynaudio designs, cone excursion is much more controlled and the driver
follows the music signal from the amplifier with a remarkable sense of
dynamics and accuracy.
- Die-Cast Aluminum Basket: The Dynaudio MSP woofer
utilizes a low-resonance, highly warp-resistant basket made of die-cast
aluminum. Due to the stiffness of this non-magnetic material, the basket can
be designed with aerodynamically formed ribs to reduce air compression
behind the moving membrane. Another advantage is its long-term resistance
against thermal, mechanical or other external influences.
Twin Bi-Amplified Digital Amplifiers:
The Dynaudio Xeo 2 powered wireless speaker system utilizes twin 65 watt amplifiers
inside of each speaker for a total
system power of 260 watts. Each speaker's tweeter and woofer has its own 65 watt
digital amplifier that has been specifically matched, individually tuned, and
precisely optimized to power that particular driver. This means you don't need to concern
yourself with matching other components to the speakers, because Dynaudio has
done all the work for you. Because the amps and drivers are so close together,
there's less internal wiring. Less internal wiring means less possibility of
interference. It also means the signal can stay in digital form for longer -
only being converted to analog at the last possible moment - before it's output
as physical sound. The result is clearer, cleaner audio at any listening level.
Advanced DSP (Digital Signal Processing):
Advanced DSP (digital signal
processing) filters and adaptive bass technology tailor the sound of the Xeo 2
speakers to your room and application. You can select between 3 DSP modes -
Neutral (free-standing placement), Wall (placed near a wall), or Corner (placed
in a corner). You can also select which speaker is Left or Right.
Rigid Bass Reflex Enclosure:
The Dynaudio Xeo 2 powered wireless
speaker system utilizes a bass reflex design with a rear-firing port on the back
of each speaker for greater efficiency and bigger bass response. The 1.1" tweeter and
5.5" woofer sit in a solid aluminum
baffle and ultra-stable composite housing designed to minimize unwanted
interference. Additional internal damping, strengthening, and bracing in
critical sections of the cabinet substantially reduce unwanted resonance. The
included grilles have been designed so they do not influence the sound
dispersion of the speakers. They are attached to the speaker cabinets with
magnets and may be removed if needed.
Bluetooth Audio Streaming:
The Dynaudio Xeo 2 features built-in
Bluetooth 4.1 with support for wireless audio streaming (A2DP) and control
(AVRCP). You'll be able to wirelessly stream stored music, music apps, and other
audio content from your Bluetooth source device (such as your smartphone,
tablet, or computer) to the Xeo 2 speaker system. You'll also be able control
basic playback functions (such as Play/Pause, Previous/Next Track, & Volume)
from the included IR remote. You can pair multiple Bluetooth source devices to
the Xeo 2 system, but only one device can be connected and played back at a
The Dynaudio Xeo 2 speaker system does not support Bluetooth
hands-free communication for making or answering phone calls.
Digital & Analog Inputs:
In addition to wireless Bluetooth
connectivity, the Dynaudio Xeo 2 speaker system offers digital and analog wired
inputs. There is one optical (toslink) digital input that will accept 2ch PCM
audio up to 24-bit/192kHz (not compatible with Dolby Digital/DTS). There are
also two analog audio inputs, consisting of 3.5mm Aux input and one stereo RCA
The digital & analog inputs are only only located on one of the
The Dynaudio Xeo 2 powered wireless speaker system can
be fully controlled with the included IR remote, while buttons on top of the
cabinet let you switch it on/off or change the volume. The operational state of
the system is indicated by two LEDs on the front cabinet.
The Dynaudio Xeo 2 powered wireless speaker system
can be placed on a table-top, desk, shelf, or set of speaker stands.
Pre-installed rubber bases provide a non-slip surface. The Xeo 2
can also be wall-mounted using proprietary brackets (sold separately).
- Proprietary Desk
stand (sold separately - see Accessories Tab)
boasts a rigid, low-resonance aluminum construction, and raises the Xeo 2
above the surface to enable optimum sound quality and performance from the
loudspeaker. The internal cable channel allows the wires to disappear into
stand and below the integrated plinth.
- Proprietary Wall Bracket:
Another option is the discrete
and elegant Xeo 2 wall-bracket (sold separately - see Accessories Tab) that allows you to directly
mount the Xeo 2 almost flush to the wall; or alternatively to mount the Xeo
2 with some extra space to the wall, allowing you to angle the speaker 180°
left or right. The Xeo 2 wall-bracket is made of solid aluminum and
provides a low-resonance, rigid and elegant bracket for the speaker.
Optional components like the Dynaudio Connect,
Xeo Remote Control, Xeo Extender, & Exeo Link, as well as additional Xeo
speakers enable setting up a wireless multi-room and multi-source system (up to
- Dynaudio Connect: The Dynaudio
Connect (sold separately - see Accessories Tab) connects the Xeo 2 speaker
system to your home WiFi network and lets you stream music directly from
your smartphone, tablet, laptop, or computer. Dynaudio Connect even supports
Spotify Connect, so you can stream music directly from your Spotify account.
The Connect also features analog inputs (including 3.5mm Aux and stereo RCA
input), as well as digital inputs (including USB-B and optical/coaxial
digital) to connect your external analog and digital audio devices. In
addition, the Dynaudio Connect offers built-in Bluetooth.
The Xeo remote control (sold separately - see Accessories Tab) can be used to turn the Xeo speakers on/off, change the
volume, and select between connected signal source.
The Xeo Extender (sold separately - see Accessories
Tab) extends the reception range of the Dynaudio Connect. As a result, Xeo
speakers or other Xeo components can be operated further away from the
The Xeo Link (sold separately - see Accessories Tab)
receives wireless signals from a Dynaudio Connect and outputs analog and
digital signals from its connections to your existing stereo system.
Each powered wireless speaker comes with an 8'
detachable AC power cord and will need to be plugged
into an AC wall outlet or surge protector (sold separately).
The Dynaudio Xeo 2 powered wireless speakers are not battery
The Dynaudio Xeo 2 speaker system will automatically
switch to standby mode if there is no audio signal for 20 minutes.
There is a USB-A port on the back-panel of each
Xeo 2 speaker which allows for firmware updates. The firmware updates can downloaded from the Dynaudio website
onto a USB thumbdrive which will then need to be inserted into each speaker's