Overview: The PetSafe 300 Yard Remote Trainer consists of a
rechargeable training collar that can deliver three types of stimulation, and an
ergonomic hand-held remote with an LCD readout. The collar and remote are
waterproof so you can train your dog in any weather or conditions. The collar is
designed to fit dogs 8 pounds and up, with neck sizes up to 21" - 22". The system includes the Training module, mounted on a
premium coated nylon collar,
remote, an AC charging adapter, short and long contact points, and a test light
Operation: The PetSafe Remote Trainer helps you communicate with your
dog via signals from the remote to the training collar. When a button is pushed
on the remote, a radio signal is sent to the collar, communicating the
correcting signal. You can choose one of three training options: tone,
vibration, or static stimulation. The trainer has a range of up to 300 yards, which is good for around the house or in the yard. Trainer Dimensions: Length 2.684", Width 1.389", Height 1.387" (including contact
Add-A-Dog: The PetSafe 300 Yard Remote Trainer has the
capability of training two dogs. An Add-A-Dog Receiver Collar is available from
the manufacturer (PAC00-16163 or PAC00-16164 for "Lite" version). A button on
the side of the remote lets you switch between collars to deliver correction.
Remote: The remote has separate buttons for delivering tones and
vibration/static to the collar. You can vary the level of stimulation using the
two buttons on the side. Level 0 is vibration, while levels 1 through 15 are
static stimulation. The higher levels (8-15) are locked out to prevent delivery
of high static stimulation accidentally. (Unlocking requires a two-button
action.) The backlit LCD display indicates which type and level of correction you are
delivering. If training two dogs, the display also shows which collar is active. The remote has a rechargeable battery with a battery level indicator
in the display. Remote dimensions: Length 4-9/16", Width 1-9/16", Height 1-1/8".
Charging: The training collar and remote are both powered by
rechargeable batteries. An AC charging cable with dual 2-pin plugs is included.
This allows you to charge the collar and remote, or two collars simultaneously. Fully charging
both batteries takes approximately 5 hours.
Test Light Tool: The included Test Light Tool lets you
safely test the training collar stimulation. The contact points fit into the
Test Light Tool, and when static stimulation is delivered to the collar, the
test light will flash. The tool can also be used to tighten the contact points.
Recommendations: The PetSafe Remote Trainer can train your
dog with safe and harmless corrective stimulation. With three types of
stimulation, you can choose what works best for your pet. Not all dogs are the
same. You should always start at the lowest level and work your way up until you
find the "recognition level" where your dog begins to notice. If your pet
vocalizes or panics when receiving stimulation, the level is too high, and you
should go back to the previous level.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.