Skip Navigation

Alpine HCE-C125

Rear-view camera

8 Reviews | 6 questions - 13 answers

Overview

Our take on the Alpine HCE-C125

Why on earth would you need a rear-view camera when you have eyes and a neck that turns? Well, be honest, how many times have you backed up with something blocking your vision, and you were just... winging it? It's been more than a few times, hasn't it?

Alpine Authorized Online Dealer

Be a parking lot superhero

Why on earth would you need a rear-view camera when you have eyes and a neck that turns? Well, be honest, how many times have you backed up with something blocking your vision, and you were just... winging it? It's been more than a few times, hasn't it?

Alpine's HCE-C125 rear-view cam lets you back up with confidence, instead of pushing your luck. Measuring about one cubic inch, this ice-cube sized camera pairs stealthily with Alpine's low-key KTX-C10LP license plate mounting kit to give you a 131º horizontal viewing angle on the world behind you. Thanks to its automatic imaging function, this camera intuitively adjusts white balance, showing you a crisp, bright mirror image, day or night. With a view this expansive and clear, you'll dare to parallel park in spaces most people would avoid. In some cities, that's a super power.

This camera is compatible with any in-dash receiver or front-mount screen with a composite video input.

Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.

Good picture quality and field of vision. Dead simple wiring when connecting to an alpine head unit, and still easy with any radio that has rca video in for a camera. 4 stars because the the included mount is a little flimsy, but that is easily remedied with a license plate mount.

Anonymous, Denver City, TX

What's in the Box:

  • Rear-view camera (with attached 20" cable terminated by a 5-pin connector)
  • 23' Power/Ground/Signal harness (w/ 5-pin connector on one end and 6-pin connector on other end)
  • 9.5' Power/Ground/Signal harness (w/ a 6-pin connector on one end and a male composite video RCA connector on other end along with power/ground signal wire)
  • 2-Piece mounting bracket
  • 4 Machine screws
  • 4 Self-tapping screws
  • Rubber sleeve
  • Rubber wedge
  • 3M tape
  • 5 Wire-ties
  • Owner's Manual (En/Fr/Sp)

Highlights:

  • NTSC rear-view camera with standard RCA and direct connectivity
  • automatic imaging function — metering and white balance adjustment
  • mirror image view
  • high low-light performance
  • fits Alpine KTX-C10LP license plate camera mounting kit
  • camera dimensions: 0.935"W x 0.935"H x 1.175"D
  • black-box dimensions: 1.5"W x 0.59"H x 0.98"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Alpine HCE-C125 Reviews

Average Customer Review(s):

(8 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

Features and Specs
Camera Type Rear
Resolution 307,200
Parking Guidelines No
Lux Rating 1.5 lux (min)
Selectable Views N
Reversed Image Mirror
Horizontal Viewing Angle 131 deg
Vertical Viewing Angle 103 deg
Wireless No
Plug type Composite video

Product Research

Features

Rearview Camera: The rearview camera assists you (the driver) in checking behind your vehicle by sending images to your vehicle's in-dash monitor, showing conditions behind the car. The camera uses a wide-angle lens, therefore, there is a difference in distance perspective between what is normally seen and what appears on the screen. Also, the images shown by the camera are reversed, so as to appear the same as what is seen through the rearview mirror. The Alpine rearview camera offers the following additional features.

  • Weatherproof housing
  • 1/3.7" color CMOS image sensor with a 4:3 aspect ratio
  • 640 x 480 (300,000) effective pixels
  • 131° horizontal viewing angle, 103° vertical viewing angle
  • Illumination Range of 1.5 lx to 100,000 lx
  • F=1.34 focal length
  • F=1:2.2 brightness
Note: This rearview camera is meant as a back-up aid only; never solely rely on the rearview camera when backing-up. In addition to using the rearview camera, always look behind you to make sure everything is clear when backing up your vehicle.

Compatibility: The HCE-C125 rearview camera can be used with Alpine multimedia & navigation receivers which feature a proprietary multi-pin camera input, as well as Alpine & other brands of receivers with a composite video camera input.

  • Proprietary Harness: If you are connecting an Alpine receiver with a proprietary camera input, then use the included 23' harness with proprietary multi-pin connectors on each end (you will not use the composite video harness).
  • Composite Video Harness: If you are connecting an Alpine or other brand of receiver with a composite video jack, you will use both the 23' proprietary harness and the 9.5' composite video harness.

Optional License Plate Mount Kit: The HCE-C125 rearview camera is compatible with Alpine's KTX-C10LP rearview camera license plate mounting kit (500KTXC10L, sold separately). 

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

To go with my Alpine HU [ M  Apr 12, 2017 ]
It was compatible with the head unit i purchased and thought it would make a nice addition to my wife's new stereo [ Andrew  Mar 21, 2017 ]
purchased alpine double din from your store for my street rod,wanted to pair it with alpine camera for best results. [ howard  Jan 15, 2017 ]
Works with ilx-007 [ Jerome  Dec 25, 2016 ]
Xmas gift [ JOSEPH  Dec 18, 2016 ]
According to the specs and Andy's recommendations, it has Direct Connection to my Alpine X009-WRA head unit, simply installation and great video quality. Andy's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=42 [ Karim  May 27, 2016 ]
Reviews, usage, application [ Saul  May 11, 2016 ]

6 questions already asked

Been awhile since I pulled my radio out but I do believe it same video plug as stock to swap out and you'll have hook up power and ground and the backup switch wire but it would work with the factory deck [ Kyle  Jun 17, 2017 ]
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate and what you will need for installation. If it does not, then they will also be able to discuss other options with you. [ Kenny  Jun 16, 2017 ]  Staff
The information found in the Alpine owner's manual indicates the included power unit is required for installation. For more details, or to discuss further, please contact an Advisor directly by phone (1-800-324-9695) or online chat. They can offer more specific information pertaining to your installation questions. [ Larry  Apr 20, 2017 ]  Staff
Yes it does come on automatically in reverse [ DANIEL  Jan 26, 2017 ]
Yes it does,it wires into reverse light circuit on your truck. [ MICHAEL  Jan 26, 2017 ]
It will automatically display on your head unit if it is powered from the reverse power signal. Either hook it up to the reverse light on your tail light, tow connection or the switch on your transmission. Typically the camera and the head unit are both hooked up to this power signal so when the car or truck is placed in reverse, the image displays on the head unit screen. [ Michael  Jan 26, 2017 ]
Hooking to my alpine receiver, shifting to reverse triggers the screen and camera; I would assume control would be from the receiver [ John  Jan 25, 2017 ]
I think your question would be better served on that product page, but based upon what the information says on that page, it appears it only offers a single camera input. [ DANIEL J  Jan 22, 2017 ]
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you. [ Kenny  Nov 23, 2016 ]  Staff
No, your head unit will have to incorporate that into the video display. [ DANIEL J  Jan 22, 2017 ]
It has warning lines in the center and cones on the sides The are green, yellow, and red closes to car There are options to also turn off the indicators There is no sound or beeps just visual [ Mark  Nov 24, 2015 ]
I don't believe it does, but my radio does so it wasn't necessary. [ Russell  Nov 23, 2015 ]
It has guidance lanes. How will you mount it? I used alpines license plate frame that holds that camera and the holes didnt line up with the camera. I would not purchase from alpine again. It is overprized for what you get. Very dissapointed in the quality control. [ Hilvin  Nov 23, 2015 ]
Articles