Disc & USB Playback
AM/FM + Pandora + SiriusXM Radio
6.1" Touchscreen Display: The INE-W940 has a 6.1"
WVGA (1.15 million-pixel) touchscreen LCD monitor (with 16:9 aspect ratio) that
serves as a video monitor, information display, and system controller. The
INE-W940's touchscreen monitor provides a more balanced picture, not
over-emphasizing dark or light areas, so movies are seen with greater clarity.
All of the graphics are crisp and clean for your viewing pleasure.
Start Up Time: The Alpine
INE-W940 has a start up time of approximately 5.1 seconds from Off to the
"Attention" screen. Once the "Attention" screen appears, you can tap the "Accept"
button on the head unit's touchscreen to go instantly to the Navigation screen
or press the "Audio" hard-key to access the Source menu.
Dual Screen: The Alpine
INE-W940 lets you display the Navigation and Audio/Visual screens
simultaneously, side-by-side. You can switch the right and left screens using
simple drag & drop touchscreen commands.
Display Settings: The Alpine INE-W940 offers the following settings
to customize the head unit's LCD touchscreen monitor.
- Screen Modes: You can select one of the following
display modes; Wide (evenly stretches a 4:3 picture horizontally to fit the
widescreen monitor), Cinema (displays a 4:3 picture by stretching out the
picture horizontally and vertically; good for displaying a cinema-type
picture with a 16:9 ratio), or Normal (displays a 4:3 picture at the center
of the screen with a vertical black band at each side).
- Background Colors: You can
choose from five different background colors for the display; Black, Blue, Red, Green,
- Picture Adjustments: Change and save Brightness,
Color, and Contrast settings for the touchscreen display monitor.
- Auto Illumination: When you connect the head unit's orange
illumination wire (on preamp/AV harness) to your vehicle's headlight
circuit, the unit's display and button illumination automatically dim when
the vehicle's headlight are switch on.
- Screen Off: You can also turn the touchscreen completely off at night,
if the display is too bright when simply listening to audio and have no need
for a monitor display.
Auto Time Synchronization: Once you have launched and accepted
navigation mode, the unit's clock syncs up with the internal navigation system,
so it automatically adjusts to your time based on your location. Whether you are
in Hawaii or New York, the INE-W940 will adjust and display the appropriate
Video Lock-out Feature: For
safety and legal reasons, the INE-W940 features a video lock-out feature to
prevent the driver from viewing a video source while the vehicle is in motion. To watch a
video source, the vehicle must be stopped with the ignition in the ACC or ON
position. The vehicle's parking brake must be engaged, disengaged, and engaged
again while the foot brake is held in. This also pertains to the receiver's
System, Audio, & Navigation Setup Menus.
2-DIN Chassis: The Alpine INE-W940 has a 2-DIN chassis (also
known as Double DIN), and will fit in many vehicles with a large dash opening.
The unit can be ISO-mounted using factory brackets, or Euro-mounted using the
supplied mounting sleeve. As always, please consult Crutchfield's
Outfit My Car to verify fit with your vehicle.
NAVTEQ Map Data: The INE-W940 offers reliable navigation with
preloaded NAVTEQ map data of the United States and Canada, including Alaska,
Hawaii, Puerto Rico, and the Virgin Islands. The map database provides
approximately 6 million points-of-interest (POIs) in various categories
throughout the coverage area. The unit's map data is stored on the head unit's
built-in flash memory.
Note: Car navigation maps are frequently updated. While
this database was judged to be as accurate as possible at the time of its
release, a map database can never be 100% accurate. Road information that is
maintained in the map databases, such as turn restrictions or road names may
change over time.
Future Updates: Future Map and Software updates will be available from Alpine and are input using
the unit's rear-panel USB via a USB thumbdrive (sold separately). Visitwww.naviextras.com
(requires Windows XP or newer; not compatible with Mac) for latest
map & navigation software updates.
OnPoint Plus GPS: The INE-W940 uses Alpine's OnPoint Plus
Advanced GPS Positioning. This ensures that your vehicle stays accurately
positioned on the map even in areas where it's difficult to receive GPS
reception, such as in a tunnel or around tall buildings. OnPoint Plus
simultaneously uses three technologies - satellite linked positioning data, gyro
sensor technology (to determine the vehicle's direction), and accelerometer
technology (to gauge the vehicle's speed) - resulting in continuous coverage of
the location of your vehicle. For greater accuracy, an optional connection for
speed pulse connectivity to the vehicle is available.
Note: The INE-W940 comes supplied with a GPS antenna
that features a magnetic base and an attached 11.75' cable terminated by a
proprietary plug which connects to GPS-ANT input on the back of the head unit.
The unit also comes supplied with a self-adhesive magnetic base if you are
having trouble finding a flat metal surface to mount the antenna. The GPS
antenna only measures 1.0625" (w) x 0.5625" (h) x 1.1875" (d).
On-Screen Map: As you travel, the INE-W940 guides you to your
destination via its on-screen map. The unit's on-screen map shows your vehicle's
current position (a blue arrow by default), the recommended route (an orange
line), the surrounding map area, and your destination as a checkered flag. The
on-screen map shows streets in a way that is similar to how the paper road maps
show them. Their width and colors correspond to their importance; you can easily
tell a freeway from a small street. Road segments affected by traffic events are
displayed with an alternate color on the map, and small symbols above the road
show the nature of the event. When navigating a route, the top section of the
map screen shows information about the next route event (maneuver) and the next
street or the next city/town. Both the type of the event (turn, traffic circle,
exiting freeway, etc.) and its distance from the current position are displayed.
When approaching a turn, the map screen will zoom in and raise the view angle to
let you easily recognize your maneuver at the next junction. If the next turn is
at a distance, it will zoom out and lower the view angle to be flat so you can
see the road in front of you. Two data fields on the left of the screen shows
the distance you need to travel on the route before reaching your final
destination and the time needed to reach your final destination of the route
based on information available for the remaining segments of the route. You can
adjust the following map settings.
- Map Views (2D/3D): The INE-W940 provides three Map
Views, choose from North Up (North is always at the top of the display;
this makes it easy to determine your current heading with respect to the map), Heading
Up (current direction is always pointing to the top of the display; this
makes it easy to see the direction of the next turn on the map), or 3D View
(more realistic perspective by tilting the map and displaying it with a
horizon line; streets are displayed as you approach them instead of from a
- Map Color: The navigation map screen uses different
color themes (Day/Night) during the day and during the night for both the
map and the menu screen. Daytime colors are similar to paper road maps, and
the menus are bright. The night color themes use dark colors for large
objects to keep the average brightness of the screen low. You can also set
the navigation unit to switch between daytime and night color modes
automatically based on the current time and GPS position.
3D Object Types: The INE-W940's navigation softwaresupports the following 3D object types.
- 3D Terrain: 3D terrain map data shows changes in terrain,
elevations or depressions in the land when you view the map in 2D, and use
it to plot the route map in 3D when you navigate. Hills and mountains are
shown in the background of the 3D map.
- Elevated Roads: Complex intersections and vertically isolated
roads (such as overpasses or bridges) are displayed in 3D.
- 3D Landmarks: Landmarks are 3D artistic or block representations
of prominent or well-known objects.
- 3D Buildings: 3D block representation of full city building data
containing actual building size and position on the map.
Lane Information & Signposts: The INE-W940's navigation
map offers helpful lane information & signpost guidance, along with junction &
- Lane Information: When navigation on multilane roads,
it is important to take the appropriate lane in order to follow the
recommended route. If lane information is available in the map data, the map
screen will display the lanes and their directions using small arrows at the
bottom of the map. High lighted arrows represent the lanes you need to take.
- Signposts: Where additional information is available,
signposts substitute arrows. Signposts are displayed at the top of the map.
The color and style of the signposts are similar to the real ones you can
see above the road or by the roadside, They show the available destinations
and the number of the road the lane leads to.
- Junction View: If you are approaching a freeway exit or
a complex intersection and the needed information exists, the map is
replaced with a 3D view of the junction. The lanes you need to take are
displayed with arrows. Signposts can also be present, if information is
- Tunnel View: When entering a tunnel, the map is replaced with a
generic tunnel image so that surface roads and buildings cannot distract
Voice Guidance/Text to Speech: In addition to graphical
on-screen directions and maps, the INE-W940 provides voice guidance and
turn-by-turn directions, capable of text-to-speech (TTS), announcing the street
names along with the turn directions. With turn-by-turn instructions delivered
by Text-to-Speech (TTS) technology, street names, freeway numbers and freeway
exit names are announced clearly through your vehicle's audio system. Directions
are available in English, Spanish, or French.
Where Am I?: This screen contains information about the current
position (or approximately the last known position if GPS reception is not
available) and a button to search for POIs nearby.
Setting A Destination: The Alpine INE-W940 offers several
ways to select a destination:
|Browse Map||Tap a point on the map as your
|Home||Save your home address so you can
quickly navigate to your house from anywhere.|
|Address||You can find an address by entering
the exact address (including house number), the center of a
city/town, an intersection, the midpoint of a street, or zip code.|
|Places (POI)||Select from approximately 6 million
Point-of-Interests (POIs); search POIs by name, preset, or category
around your current location, destination, route, or specific city.|
|Address Book||Save frequented locations in the
unit's address book to quickly add as a destination.|
|History||Destinations you have set previously
appear in the History search. |
A quick way to search for an address,
a Place, an Address Book entry, or a History item is to use the
free-form search. Simply enter a street address (just the street
name or both the street and the house number), the name of a Place,
a previous destination or an Address Book entry from this one search
|Coordinates||Enter Latitude and Longitude
coordinates as your destination.|
|Geotags||You can also set the location stored
in a picture (on a microSD card) as your destination.|
Vehicle Profile: You can
create a vehicle profile for your car, truck, or SUV. Enter the following
parameters for your vehicle - Fuel Consumption (avg. fuel consumption of your
vehicle in city and rural areas), Engine Type (engine and fuel type), Fuel Price
(avg. fuel price for travel cost calculation), Max Speed (max speed you travel).
Route Calculation: The unit's navigation software calculates
your route based on the following selections.
- Vehicle Types: You can select what type of vehicle you
are driving, so the navigation unit can determine the best route based on
your vehicle type (Car, Truck, Emergency, Bus, or Taxi).
- Route Methods: You can choose which route method
(Fastest, Shortest, Green, or Easy) the navigation unit should use when
calculating your route.
- Fast: Gives a quick route if you can travel at or near the
speed limit on all roads. Usually the best selection for fast and normal
- Short: Gives a route that has the smallest total distance of
all possible routes. It can be practical for slow vehicles.
- Green: Gives a quick and fuel efficient route based on the
fuel consumption data given in Route settings. Travel cost and CO2
emission calculations are estimations only. They cannot take elevations,
curves and traffic conditions into account.
- Easy: Results in a route with fewer turns and no difficult
maneuvers. With this option, you can make your software to take, for
example, the freeway instead of a series of smaller roads or streets.
- Avoidances: You can tell the navigation unit to avoid
certain types of roads along your calculated route, such as Highways, Tolls,
Carpool/HOV, Unpaved Roads, and/or Ferries.
Modifying Your Route: When navigation is already started,
there are several ways to modify the active route. Options include:
- Add Waypoint: If you already have a recommended route
and you select a new destination, the unit will ask you whether to start a
new route, add a new waypoint (intermediate destination) to the route or
append the newly selected destination at the end of the current route.
- New Starting Position: For normal navigation, all
routes are planned from the current position. In order to check future
routes, simulate them or see their length in time and distance, you can turn
off the GPS receiver. Then you can set the starting point of the route to a
different location than the current GPS position.
- Edit Destination: You can edit the route by modifying the list of
destinations. You can add or remove destinations, modify the start position
or reorder the list.
- Cancel Route: You can cancel the active route and delete its
destination and all its waypoints.
- Route Alternatives: To recalculate the active route with a
different route planning method, you can modify the unit's Route settings.
Route Review: The INE-W940 lets you review your route's
instructions and simulate the drive.
- Itinerary: The Itinerary page displays turn-by-turn
instructions for your entire route and the distance between turns.
- Route Simulation: You can preview all the route information
and simulate travel along a projected route.
Warnings & Alerts: The INE-W940's navigation software
provides the following warnings & alerts.
- Alert Points: You can save any map location as an alert
point (for example a speed camera or a railroad crossing).
- Speed Limit Warnings: Maps may contain information about the
speed limits of the road segments. The navigation head unit is able to warn
you if you exceed the current limit. This information may not be available
in all areas, or may not be fully correct for all roads in the map. Speed
warning can be fine-tuned in Sound and Warning settings.
Trip Monitor: The Trip Monitor contain useful information about your
trip. This information can be saved manually when you reach your destination or
automatically along your route. Trip log data includes; Start/End Time,
Avg./Max. Speed, Total/Driving/Stopped Time, Total Distance, and Min./Max.
Automatic Route Recalculation: The unit will automatically
recalculate your route if you stray from the navigation unit's previously
Off-Road Navigation: The difference between the on-road and off-road
modes is the navigation itself. When you are on the Map screen with an off-road
route, your position and heading is not aligned with the nearest road and
there is no turn by turn navigation; just a recommended direction. You see a
straight line drawn between your current position and the next destination to
reach. The Turn Preview field in the top left corner shows an arrow with your
bearing and the distance of the next destination.
Bluetooth Technology (powered by Parrot): The Alpine
INE-W940 features built-in Bluetooth technology (v2.1+EDR). The
head unit's built-in Bluetooth allows you to make and receive phone calls
wirelessly through the receiver; as well as stream music wirelessly from your
smartphone to the head unit. In order to use Bluetooth wireless
technology, your phone must also be Bluetooth compatible and be able to
interpret certain profiles. This unit is compatible with the following Bluetooth
- Hands-Free Communication: HFP (Hands Free Profile), HSP
(Head Set Profile), OPP (Object Push Profile), PBAB (Phone Book Access
- Audio Streaming: A2DP (Advanced Audio Distribution
Profile), AVRCP (Audio/Video Remote Control Profile).
Note: Due to the differences in Bluetooth technology,
some Bluetooth enabled devices may be incompatible, function improperly, or
may not support all features when used with the Alpine INE-W940. Parrot
software updates provide support for future phones.
Secure Simple Pairing: With Secure Simple Pairing (SSP), you
can easily pair a Bluetooth enabled phone to the INE-W940 without having to
enter pin codes or go through complicated settings (your phone must also support
SSP). When your paired Bluetooth device is in close proximity to the receiver,
the auto connection function automatically pairs the two units. Up to 3
Bluetooth-compatible devices can be paired to this head unit, but only one
device can be used at a time.
Hands-Free Communication w/ External Mic: The Alpine
INE-W940 supports wireless hands-free communication (HFP/HSP/OPP/PBAB) for your
Bluetooth enabled mobile phone. Incoming calls are announced by a caller ring
tone through your vehicle's speakers (music will be muted) & a Caller ID message
across your Alpine head unit's touchscreen display. The INE-W940 allows you to
carry on a phone conversation from your Bluetooth enabled mobile phone using the
head unit's external microphone and your car audio speakers. During a
conversation you can adjust the volume, as well as switch between the Private
Mode (talking directly on your cell phone) and the Hands Free Mode.
- Receiving Calls: The Alpine INE-W940 provides several ways to
answer your phone calls without picking up your mobile phone.
- Manual Answer: Manually answer an incoming call by
pressing the "Phone" button on your Alpine head unit.
- Automatic Answer: Set the Alpine head unit to
answer the incoming call automatically; when a call is received, it is
answered automatically after approximately 5 seconds.
- Call Waiting: If a second call is received during a
current call, you can have the first caller wait momentarily while you
take the second call. When you are finished with one call, you can
switch to the other.
- Making Calls: The Alpine INE-W940 also provides a variety of
functions for placing a phone call without using your mobile phone. The
INE-W940 features full phone book access, call history,
and shortcut dialing with compatible phones.
- Phonebook (with ABC search): Up to 1,000 entries (5
telephone numbers for each name) can be downloaded from your compatible
mobile phone. You can select the first 3 call letters (ABC) to search for a
desired name in your phonebook.
- Shortcut Dialing: You can assign up to 4 phone numbers
for one-touch dialing to make a call easily.
- Call History: The 60 previously dialed, received, or
missed numbers can be retrieved and dialed from memory.
Note: The included
external microphone comes with a sun-visor clip to mount it in your vehicle. (with visor-clip). The mic is tuned and engineered to
reduce noise interference and feedback. The external microphone measures 0.5625"
(diameter) x 1.0" (deep); and features an attached 13' cable terminated by
a right-angle male 3.5mm connector.
Text Message Alert: The INE-W940 can give you a
notification on the display with a blinking mail icon indicator for 30 seconds
while receiving a text message on your Bluetooth-enabled phone. The mail icon
indicator will remain on if there is an unread message on a connected mobile
phone. You must still read or create a text message from your mobile smartphone.
Audio Streaming: The Alpine INE-W940 can stream music
from you Bluetooth A2DP/AVRCP mobile device. Not only can it control & stream
your music through Bluetooth, it can process your music using its built-in DSP
Sound Expansion to ensure you get the best sound. Basic playback functions
include; Play, Pause, Fast Forward/Rewind, Previous/Next, & Random/Repeat. The head unit will also display
your stored music's song information; such as Artist name & Song/Album title.
The INE-W940 also supports audio streaming of music apps on your
Bluetooth-enabled smartphone, but without control or metadata. You will continue
to use your Bluetooth enabled smartphone to view and control streaming music
Note: When an incoming call or outgoing call is in
progress from your Bluetooth enabled mobile phone, audio streaming will be
paused so you can take your call. Once the call is finished, your streaming
music will resume.
Bluetooth Adjustments: You can emphasize or weaken the volume
level of the phone caller, the ring tone, and the microphone input to fit your
own preference. You can also select which car speaker outputs the
audio from your Bluetooth-enabled mobile phone/device. You can select All,
Front-Left, Front-Right, or Front-Left/Right.
Disc & USB Playback
Compatible Discs: The Alpine INE-W940 will play back DVD Video, DVD-R/RW, DVD+R/RW, CD,
CD-R/RW discs (12cm only). It will also support two-layer DVD discs. This unit
can play MP3/WMA/AAC music files and DivX video files recorded onto CD-R/RW,
DVD-R/RW, or DVD+R/RW discs. The unit
has a front-loading disc-slot to make loading your disc easier because there is
no panel to slide or fold-down.
Rear-Panel USB Port: The head unit's rear-panel USB (type-A)
port allows you to connect a USB Mass Storage Class (MSC) device; such as select
Android smartphones (Froyo/Gingerbread OS only), portable digital audio players,
or USB thumbdrives. A 5' USB extension cable is included.
The USB port enables audio/video playback & control of MP3/WMA/AAC music files
and DivX video files stored on your portable USB MSC device through the
Alpine INE-W940. USB portable audio players that can be charged via USB will be
charged when plugged into the navigation receiver's USB port (max. 1A), and the
vehicle's ignition switch is set to ACC or On. The USB port is also used to
update the head unit's software, via downloadable software & map updates from the
Media File Playback: The Alpine INE-W940 supports the
following types of MP3/WMA/AAC music files and DivX video files recorded onto
disc or loaded onto a USB device.
|Media Type ||Disc (CD-R/RW, DVD-R/RW, DVD+R/RW)||USB (MSC)|
|File System||ISO 9660
Level 1/2 or Joliet||FAT
|Playable File Types||Audio||MP3: bit rate of
8-320kbps; sampling rate of 8-48kHz|
WMA: bit rate of 64-256kbps; sampling rate of 32-48kHz
AAC: bit rate of 32-384kbps; sampling rate of 16-96kHz
|MP3: bit rate of
8-320kbps; sampling rate of 8-48kHz|
WMA: bit rate of 5-384kbps; sampling rate of 8-48kHz
AAC: bit rate of 48-238kbps; sampling rate of 8-48kHz
(versions 3/4/5/6): optimum resolution of 96-720 (h) x 96-576 (v)|
|Max # of Files/Folders||2,000 files/200
tags (v1, v2), WMA tags, AAC tags|
Playback Modes: The Alpine INE-W940 offers various playback
modes for disc and USB playback.
- Pre-stop Function: When the
Pre-stop function is used, the position at which playback is stopped is stored
in the memory, and playback resumes from that position.
- Repeat: Select between three modes; File (repeats
playback of current track/file/chapter), Group (repeats only files in
current folder), All (repeats all tracks/files).
- Random (MIX): Select between two modes: All (all
tracks/files on disc are played in random order), Group (only files in current folder are
played back in random order).
- Slow Motion Playback: When a DVD is in the
pause mode, you may move forward through the program being played one
step (frame) at a time or in slow motion (1/16 or 1/2 speed), forward or
backward. No audio is played during slow motion playback.
Search Modes: The Alpine INE-W940 offers various search modes for
disc and USB playback.
- Text/File/Folder Quick Search: When you are playing
a disc with CD Text, ID3, AAC, or WMA tags, you can easily search for a
track, file, or folder by its title. Once you have activated the search
mode, you can use the touchscreen to quickly scan through the titles to
locate the desired track. For discs without CD Text, ID3, AAC, or WMA tags,
searches are made using the track numbers associated with each song.
- Direct Search: Use this function to move directly to the
beginning of the a chapter or track on a disc.
- Skip (Next/Previous): During playback you can skip to the
next or previous track, title, or chapter.
- Fast-Forward/Fast-Reverse: You can view a DVD in
various speeds in either direction by touching and holding the
fast-forward or fast-reverse button on the touch screen. You can select
from 2x, 4x, or 8x, speeds.
- Frame-by-Frame: You can advance the motion picture by one
frame at a time. No sound is output during forward frame-by-frame
playback. You cannot execute reverse frame-by-frame playback.
Off Insert/Eject + Auto Reload: A DVD/CD disc can be inserted or ejected
with the power off. When a disc is inserted with the power off, the unit will
automatically power up and begin playback. When a disc is ejected and left sticking out of
the disc slot for 20 seconds, the unit automatically reloads the CD to protect if
Parental Lock: Parental Lock allows you to restrict the playback of DVDs that are unsuitable
for younger viewers. You can select a parental lock rating from 1-8, which is
protected by a 4-digit password.
Angle Mounting: For proper disc playback, Alpine recommends
mounting the INE-W940 no more that 30° above horizontal.
iPod AV Playback w/ DAC Bypass: The Alpine navigation head
unit supports direct connection of your 30-pin or Lightning-connector through
its rear-panel USB port and 3.5mm video input. The INE-W940 supports audio/video
playback, music navigation, information display, and charging of select Apple
devices. The Alpine INE-W940's USB connection
allows your iPod/iPhone's music library to be loaded instantly to the
Alpine head unit and sound quality to be maximized through the head unit's
24-bit D/A converter (bypassing iPod/iPhone DAC), allowing for a Signal to Noise
ratio up to 100dB.
- 30-Pin Dock Connector: Using Alpine's proprietary
KCU-461iV iPod video cable (500KCU461V,
sold separately), you can enjoy audio playback of your stored music and
music apps on your iPod/iPhone; plus video playback of your stored movies
and video apps on your iPod/iPhone through the Alpine INE-W940. Video can
only be displayed while the vehicle is in park with the parking brake
engaged. If you only desire audio playback, you can use Alpine's dock
connector-to-USB cable (500KCU445I,
sold separately) or the dock connector-to-USB cable that comes with your
Apple device to connect your iPod/iPhone to the INE-W940.
- Lightning Connector: If you have a newer iPod/iPhone
with the Lightning-connector, you can use the Lightning-to-USB cable that
came with your Apple device to connect your iPod/iPhone to the Alpine
INE-W940 for audio playback only. Video playback is not supported.
Note: Access to your iPhone's downloaded
applications will depend on the availability of a cellular and/or WiFi
network for purposes of allowing your iPhone to connect to the Internet.
iPod/iPhone Control: You can control your connected
iPod/iPhone from the head unit's touchscreen. The Alpine INE-W940 lets you navigate your
iPod/iPhone's music library by Playlist, Artist, Album, Song, Genre,
Composer, Podcast, or Audiobook; and your video library by Video Playlist,
Movie, Music Video, TV Show, Video Podcast, or Rented Movie. You can then
search each category alphabetically (A-Z). The head unit also offers three Shuffle playback functions (All/Album/Category) and Repeat
playback function (song).
In addition, you can control basic playback functions (such as Play/Pause,
FF/RW, Previous/Next Track) of select movie and video apps. Not all apps will be
compatible. Older iPod/iPhone device's will be locked during connection, but
Apple devices w/ iOS 6.0+ will stay unlocked.
Music Information: The Alpine in-dash navigation receiver will display
your iPod/iPhone's stored music file information; such as Track number, Elapsed
playing time, Artist name, Song/Album title, as well as Album Art. The unit will
also display song/artist information and station identification from select
1A Charging: The head unit's USB connection provides 1A of current
to power and charge your connected iPod/iPhone when your vehicle's ignition
switch is set to the 'ACC' or 'On' position (if your iPod/iPhone has no
initial battery charge, then the unit will not recognize it).
Apple Device Compatibility Chart: The Alpine INE-W940 is "Made
for iPod/iPhone" compatible and supports the following iPod/iPhone model
features (as of 9/21/2014):
|Apple Device||Generation||Tested Version||Media Type||Control Type||Display Type||Bluetooth||Charge|
|Audio||Video||Head Unit||iPod/iPhone||Pandora App||Album Art||Song/Artist Text||Track Info ||
Note: Apple iPod/iPhone software updates may
change functionality results. If you download a newer software
version, you may need to reset the head unit and your iPod/iPhone to
regain functionality. If this doesn't work, you may need to wait until a newer software update
AM/FM + Pandora + SiriusXM Radio
RDS AM/FM Tuner: The Alpine INE-W940 features a built-in
AM/FM tuner with manual, seek, and preset tuning. The Radio Data System (RDS)
feature displays radio broadcast information such as artist & track information
when listening to compatible AM/FM stations. The built-in tuner provides 12 FM
and 6 AM preset stations. Stations can be preset manually or automatically.
Local seek tuning lets you tune in only those radio stations with sufficiently
strong signals for good reception. Distance seek tuning allows both strong and
weak stations to be tuned.
Pandora Internet Radio App (for iPhone/Android/Blackberry):
The free Pandora App (either fromiTunes
Play/BlackBerry App World)
lets you play music from thePandora music service
through the Alpine INE-W940 using your USB-connected Apple iPhone (iOS 5.0+) or
Bluetooth paired Android/Blackberry smartphone. Your Apple iPhone must be
connected to the INE-W940 via the appropriate Alpine iPod connector cable (500KCU461V
sold separately) or the Dock-/Lightning-cable that came with your iPhone. Your
Android or Blackberry smartphone must support A2DP/AVRCP/SPP Bluetooth profiles
and be paired with the Alpine receiver. Your iPhone, Android, or Blackberry
smartphone will also need an active Data Plan account with connection to the
Internet via 3G, EDGE, or WiFi. The INE-W940 provides control over the Pandora
music service and displays Artist, Album, and Song information.
- Station List: You can select Pandora stations from your
Station List by date or alphabetically (A-Z).
- New Station: Based on a currently playing track or
artist, you can create a new station and save it to your Pandora account.
- QuickMix: QuickMix allows you to listen to songs played
on one or more Pandora stations in your Station List randomly. You will need
to edit your QuickMix station selections on the phone before connection.
- Skip Songs: You can skip song tracks within a station.
You cannot skip back to a previous song. Pandora limits the number of skips
- Thumbs Up/Down: You can give songs a thumbs up or
thumbs down to help Pandora personalize stations to suit your preferences.
- Bookmarking: The song or artist currently being played
can be bookmarked & stored in your Pandora account.
Note: Access to these online service will depend on the
availability of a cellular and/or WiFi network for purposes of allowing your
iPhone or smartphone to connect to the Internet. Pandora is not supported in
Canada and only available in the United States.
SiriusXM Ready: The Alpine INE-W940 comes ready for
SiriusXM programming with access to XM and Sirius Satellite Radio stations.
Thanks to its proprietary SiriusXM Connect port, you can add the optional
SXV200V1 SiriusXM Connect tuner and receive more than 150 channels of
exclusive programming directly from SiriusXM, via the "SiriusXM
All Access" package (subscription required). VisitSiriusXM.com
for a complete list of subscription options and channel guide. Additional
features of the SXV200 SiriusXM Connect tuner include:
- Text Display: Text information, such as the channel
name, artist name, feature and song/program title is displayed on the
in-dash navigation receiver.
- Search Functions: You can search for SiriusXM
programming content by Channel, Category, My Music (saved artist/song
names), and Games (saved sport teams). You can also directly select the
channel number from the head unit's touchscreen display.
- Presets + Jump Recall: Features three Satellite Radio preset
bands. You can store 6 SiriusXM stations to each preset band (a total of
18). You can also save your absolute favorite radio
station and access it with the press of a single button for easy recall.
- Instant Replay: Supports the SiriusXM Instant Replay
function, so you can pause, rewind, and replay up to 30 minutes of live
content. Listen to your favorite programming over again.
- Alerts: GameAlert will display an on-screen message
if your favorite teams' games are being broadcast. Jump to that station with
the push of a button so you can listen to the game play by play. You can
also get the latest score updates while you are listening to other stations. With Song/Artist Alert you can get
notified when your favorite songs or artists are being broadcast on any
SiriusXM station. With the push of a button, you can jump right to that
broadcast and catch the songs you want to listen to.
- iTunes Tagging: The iTunes Tagging feature lets you Tag
songs (up to 50) you hear on SiriusXM and stores the info on your
iPod/iPhone. The next time you connect your iPod/iPhone to iTunes, you will
be able to preview your selections and then purchase and download them
directly from iTunes.
- Parental Lock: This function restricts the listening of channels
for children of certain age levels and is protected by a 4-digit
Note: A separate SiriusXM Satellite Radio subscription is
required (operates on the XM Network). However, you can easily add this
SiriusXM tuner to an existing Sirius or XM account for a Multi-Radio
24-Bit DAC: The Alpine
utilizes a Burr-Brown 24-bit Digital to Analog Converter to ensure accurate audio reproduction.
CEA-2006 Compliant: The specifications given by Alpine for
the built-in amplifier comply with the CEA-2006 mobile amplifier power testing
and measurement standards from the CEA (Consumer Electronics Association). All
manufacturers who comply with the standard can display the CEA-2006 logo on
- CEA-2006 Power Rating: 18 watts x 4 channels (at 4
ohms, 20-20kHz, 1% THD)
- Max Power Output: 50 watts x 4 channels
Note: Add the KTP-445A (500KTP445A,
sold separately) Head Unit Power Pack to deliver 45 watts x 4-channel RMS of
power. The KTP-445A is compact enough to install behind the Alpine receiver. It
plugs in-line with the head unit's wiring harness, so you don't even need
6ch/2V Preouts with Subwoofer Output Control: The INE-W940 has three sets of 2-Volt RCA
pre-outs (Front/Rear/Sub) for connection of external amplifiers. The unit's
front and rear preamp output can be faded (front/rear), while the subwoofer
preamp output is non-fading. The subwoofer output level can be adjusted
indepedently from the main volume setting (0-15); so even at low volume settings
the subwoofer is still audible. The subwoofer output phase can be set to Normal
(0°) or Reverse (180°).
High-Pass & Low-Pass Crossovers:
This unit is equipped with active high-pass and low-pass crossovers which limit
the frequencies delivered to the speaker and line-level outputs. Each speaker
channel is controlled independently, so each speaker pair can be driven by the
frequencies for which have they been optimally designed. The crossover adjusts
the HFP (high pass filter) or LPF (low pass filter) frequency point of each speaker
pair, and also the slope (how fast the filter rolls off the highs or lows).
- High Pass Filter: The Alpine head unit is equipped with a
high-pass filter for its speaker-level output and front/rear-channel preamp outputs. You can set the unit's high-pass filter
center frequency point to 20Hz, 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz,
125Hz, 160Hz, 200Hz, or Off (through). The slope of the high pass filter can
be set to 6, 12, 18, or 24 dB/oct.
- Low Pass Filter: The unit's subwoofer output low-pass
filter can be set to 20Hz, 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz,
125Hz, 160Hz, 200Hz, or Off (through). The slope of the low pass filter can
be set to 6, 12, 18, or 24 dB/oct.
Tailor your vehicle's sound setting parameters through the INE-W940's built-in
i-Personalize feature. Choose your vehicle type, upholstery type, number of
speakers, and speaker locations; and the INE-W940 will calculate and apply the
optimal sound settings for your vehicle.
- Vehicle Type: Sedan,
Couple, Hatchback, Mini Van, Small SUV, Large SUV, 2DR Truck, 4DR Truck.
- Listening Position:
Driver seat or All seats
- Front Speaker Size:
Small (3-4"), Medium (5-6.5"), Large (6x9")
- Tweeter: Yes or No
- Rear Speaker Position:
Rear Deck or Rear Door panel
- Subwoofer: Yes or No
- Car Seat Material:
Leather, Fabric, Half Leather (seats are both made of leather and fabric).
online version of
i-Personalize is available for even more detailed time-correction and
sound tuning. Once your adjustments are made online, you can download the
parameters to a USB drive and transfer the settings to the INE-W940.
Built-in Equalizer: The Alpine head unit is equipped with a Preset EQ
and 9-Band Parametric EQ.
- Equalizer Presets (Bass Max EQ): 10 typical equalizer settings
are preset at the factory for a variety of music source material. Choose
from Flat, Pops, Rock, News, Jazz, Electrical Dance, Hip Hop, Easy
Listening, Country, and Classical.
- 9-Band Parametric EQ:
You can adjust the head unit's 9-Band Parametric Equalizer to create a
response curve more appealing to your personal taste. Band 1 (20Hz-100Hz),
Band 2 (63Hz-325Hz), Band 3 (125Hz-500Hz), Band 4 (250Hz-1kHz), Band 5
(500Hz-2kHz), Band 6 (1kHz-4kHz), Band 7 (2kHz-7.2kHz), Band 8 (5.8
kHz-12kHz), Band 9 (9kHz-20kHz). Bandwidth Q (1, 2, or 3). Levels (-7 to +
Audio Enhancements: The INE-W940 provides Time Correction,
Media Xpander Pro, and Source Volume Level to enhance your listening experience
in the vehicle.
- Time Correction: This unit is able to delay the audio signal
to the speakers closest to the listener with its built-in Time Correction
feature. This effectively creates a perception of increased distance for those
speakers. Time Correction allows the listener to be placed at an equal distance
between the left and right speakers for optimum staging. You can adjust the
distance (0-336.6cm) or time delay (0.0-9.9msec) of each speaker and subwoofer
to the listener.
- Media Xpander Pro: Alpine's exclusive Media Xpander Pro is
engineered to bring out the musical details lost in compressed media, and it is
adjustable per source to get the most out of your digital audio media. The Media
Expander Pro makes vocals or instruments sound distinct regardless of the music
source. The FM radio, CD, USB memory, iPhone/iPod, and Bluetooth Audio will be
able to reproduce the music more clearly even in vehicles with a lot of road
- Source Volume Level: The output level (+/-14dB) of each
source can be individually adjusted. For example, if the Tuner level sounds lower
than CD, its output can be adjusted without affecting the other sources.
IMPRINT Sound Upgradeable: The INE-W940 is IMPRINT ready.
Simply add the Alpine IMPRINTPXA-H800 audio processor (sold separately) and the Alpine
RUX-C800 controller (sold separately) for automatic sound tuning or powerful manual tuning options.
IMPRINT automatically measures the entire listening area, capturing time domain
and frequency response information from each listening location to process and
improve the sound at every seat in your vehicle. Precise control and corrections
yield enhanced sound so you can enjoy an optimal listening experience. The
IMPRINT audio processor allows you to customize your crossover adjustments so
you can control where you send your high and low frequencies. It also provide
detailed equalizer adjustments.
Beep Guide: This function will give audible feedback with
varying tones depending upon the button pressed. The volume of this feature can
be set from 0-7.
Audio/Video Input: The INE-W940 is fitted with one
rear-panel audio/video input which consists of a composite video jack and stereo
RCA jacks to connect an external AV source.
Rear Camera Input: The unit features a composite video input
for connecting an optional rear view camera (such as the
500HCEC115, sold separately). The rear-view camera function helps you to see
behind your vehicle and provides on-screen guidelines to assist you when backing
up your vehicle. If a rear-view camera is connected, you should also connect the
unit's reverse lead wire (Orange/white) to your vehicle's back-up lamp circuit.
When properly connected, the image from the rear-view camera automatically
appears on the monitor when the vehicle is shifted into reverse. Automatic video
switching takes approximately 1.0 seconds. Audio from your music source will
continue playing, while the back-up camera is displayed.
Optional Wireless Remote: The Alpine INE-W940 is wireless
remote control ready. Simply add on the Alpine RUE-4190 IR remote (500RUE4190,
sold separately) to make it even easier to control the head unit's basic tuner &
disc functions. The remote does not offer navigation control. Steering Wheel Remote Compatibility:
The head unit features an
OEM steering wheel remote control input on the rear of the unit that lets you keep your
vehicle's factory radio steering wheel remote controls when used with an
optionalsteering wheel audio control adapter
(sold separately). Please consult Crutchfield's
Outfit My Car
to see if your vehicle is compatible.