Skip Navigation

Alpine MRX-M110

Mono subwoofer amplifier — 1,100 watts RMS x 1 at 2 ohms

32 Reviews | 12 questions - 24 answers

Watch a product review

Item # 500MRXM110

This item is no longer available.

Shop all Car Amplifiers

New model available

Alpine MRV-M1200




Our take on the Alpine MRX-M110

Alpine's X-Power MRX-M110 mono amplifier uses the latest amp technology to play your music loud and clean without taking up much space. And this compact amp employs some of the same circuitry developed for Alpine's top-of-the-line PDX digital amps, so it'll bring exceptional sound to almost any ride.

Alpine Authorized Online Dealer

Digital technology that sounds perfect

Alpine's X-Power MRX-M110 mono amplifier uses the latest amp technology to play your music loud and clean without taking up much space. And this compact amp employs some of the same circuitry developed for Alpine's top-of-the-line PDX digital amps, so it'll bring exceptional sound to almost any ride.

Big power for big bass

The MRX-M110 puts out up to 1,100 watts RMS to your subwoofer system, so you can fill your listening space with plenty of bass. And it'll even operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it.

Keep the music playing

A power management system optimizes the amp's performance and keeps the music playing, even when you're pushing it hot and hard for a long time. Speaker-level inputs with an automatic turn-on feature simplify system hook-up. You can control the volume of your MRV-M500 from the front seat with the optional RUX-KNOB remote bass controller.

Putting together a bass system with this amp? Check out this Crutchfield-approved amp/sub package.

MRX-M110 control panel

Confused about impedance? Check out our article on matching subs and amps.

Product Highlights:

  • mono subwoofer car amplifier
  • 650 watts RMS x 1 at 4 ohms (1,100 watts RMS x 1 at 2 ohms)
  • 800 watts RMS x 1 at 1 ohm
  • CEA-2006 compliant
  • variable low-pass filter (50-400 Hz, 24 dB/octave)
  • variable bass boost (0-12 dB at 50 Hz)
  • variable subsonic filter (5-30 Hz, 24 dB/octave)
  • optional remote level control (RUX-KNOB)
  • Class D amp with MOSFET power supply
  • preamp and speaker-level inputs
  • preamp outputs
  • fuse rating: 25A x 4
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 13-3/8"W x 2-5/16"H x 9-1/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • Mono amplifier with four 25A fuses installed
  • Left plastic terminal cover
  • Right plastic terminal cover
  • 4 Terminal cover screws (M3 x 10mm)
  • 4 Self-tapping screws (M4 x 20mm)
  • 2.5mm Allen wrench
  • 7" Speaker-level input harness
  • Owner's Manual (Eng/ Fren/ Span)
  • Warranty sheet
  • Online registration card
  • Alpine Verification Certificate

Featured Video:

Delivers great power to my sealed 12" SSA ICON @ 4 ohm or vented 12" Sundown SA @ 2 ohm. This is the best amp in terms of power to $ to quality ratio. Hopefully it will last longer than my last MRX-M110 that started to distort after about 18 months.

Paul, San Francisco, CA


Alpine MRX-M110 Reviews

Average Customer Review(s):

(32 Reviews)

Alpine MRX-M110

RickyBobby from Chesterfield, VA on 4/23/2017

I currently have two of theses amps, using just one for now. I have an odd setup. It's pushing two 10s. One is a Sundown sa10d2, the other is a Pioneer Stage 4 (single 4ohm). Overall wired to 2ohms and it pounds. I'm going to be using the other mrx m110 on my new setup of two Sundown sa18d2s. I've had these amps for about a year now with no problems (bought them used). I've also owned other alpine amps over the years and never had problems with the amps. The only thing I've seen with these amps is the current demand when you start using the bigger amps or multi amp setup. This has nothing to do with alpine amps, that goes back to the vehicles electrical system. And for those out there that "know a guy with a '3000' watt amp on a stock electrical system" Alpine is real wattage. Also these don't do great at 1ohm. Though they are stable at 1ohm, not the best results as they cut back on output in order to run without damage. And if you're not getting AT LEAST the wattage that Alpine says you should, something else is lacking (wiring/electrical).

Pros: Sound and build quality

Cons: Not strappable

Alpine Quality

Larry from Andrews, TX on 12/26/2016

Crutchfield Customer Review (What's this?)

Bought this because of the price. I have not installed this amp yet but I am not worried about quality, after all, it is an Alpine product. Bought this as a "future" upgrade. I have two other Alpine amplifiers I have not installed, waiting to install in a 1992 Fox body project. I really bought this amp due to the price drop with no immediate plans to install.

Pros: Alpine product

Cons: none yet

Good power and bang for bucks

Paul from San Francisco, CA on 12/13/2016

Crutchfield Customer Review (What's this?)

Delivers great power to my sealed 12" SSA ICON @ 4 ohm or vented 12" Sundown SA @ 2 ohm. This is the best amp in terms of power to $ to quality ratio. Hopefully it will last longer than my last MRX-M110 that started to distort after about 18 months.




Danny from AZ on 11/18/2016


Pros: These speak for themselves selfs.I very had othere amps in the past bust these are by far the best .

Cons: None .

Great amp !

Bobbo from Warwick, RI on 10/23/2016

Crutchfield Customer Review (What's this?)

Great amp, very powerful and efficient for its size and sounds great, I have it powering a single sundown 12 @ 2 ohm in a 2 cubic foot ported box and it really moves the sundown perfectly and doesn't break a sweat ! I would highly recommend to anyone!

Pros: Small foot print Very efficient Stays cool

Cons: Wish the remote gain was included but it sounds just fine without it

It's an Alpine. Need I say more.

Scott from Florida on 8/11/2016

Crutchfield Customer Review (What's this?)

What can I say. It's an Alpine. I push it hard and it keeps my speakers pounding. It doesn't overheat, sounds great and it's easy to hookup. Writing a review on an Alpine product is like trying to write a review on a Rolls Royce. You buy it because Alpine has always made the highest quality equipment.

Pros: Big power, small footprint, stays's an Alpine.

Cons: It doesn't come with a Porsche.

Alpine MRX-M110

Joseph from Slidell, LA on 5/23/2016

Crutchfield Customer Review (What's this?)

Amazing amplifier! Coupled with two Alpine truck woofers gives me amazing bass! Love it!

Pros: Powerful. Beautiful. Easy to install.

Cons: None

Still on the Fence

Randall from Keller, TX on 3/30/2016

Crutchfield Customer Review (What's this?)

So I'm kind of on the fence with this amp. I went with it based on a recommendation from an advisor here. I specifically went with this amp because it's rated at 800 watts at 1 ohm. I have 2 DVC 12" Kicker that I specifically wanted to wire in parallel for 1 ohm operation. The first thing that I think is a little weird is that the amp is actually rated lower at 1 ohm than 2 ohms. Probably just an engineering method to limit heat produced. I've set the gains a couple of different ways. 1. by digital multimeter using ohm's law. 2. Then I got a distortion detector that allows you to set gains at the 1% distortion level. The problem that I'm having is that during big bass kicks, it goes into a temporary "protect" mode that basically cuts power to the sub. This, I assume, is a good thing. The only problem that I see is that I did a "clamp" test on this with a 50 hz test tone and it shows I'm only getting about 435 watts. My deck has no distortion at full volume so I set the gains using full volume on my kenwood 6702s deck. Granted, it sounds great and runs cool but a clamp test is normally pretty generous so in all likelihood I'm getting less than 435 watts at 1% distortion. I'm going to reset the gains and run some more tests but I'm kind of disappointed. I just expected more "clean" power. At this point I'm kind of disappointed I just didn't go with a set up that would allow me to run at 2 ohms instead of 1. We will see. This one may be going back.

Pros: Sound quality, Runs cool. Looks Cool. Unit has a variety of measures that will prevent it from over heating.

Cons: Don't seem to be getting rated power. Description and Alpine Website states that you don't need a remote turn on wire but the manual never mentions not using a remote turn on wire.


E.Richmon from ann arbor, MI on 2/20/2016

This amp is pushing 2 12" alpine type s subs at 2ohms effortlessly! Great investment.

Pros: Great buy for the power, and a very easy install, coupled with easy tuning!

Cons: Have had now for 2.5 years now and still can't come up with nothing Sorry!!

Sweet Amp

Tony K from Oregon on 8/12/2015

Crutchfield Customer Review (What's this?)

Best mono amp in this class I've ever owned. I have had a lot of Rockford Fosgate amps (new and old school ie: punch 150) as well as some others in this wattage class. I have to say that this is my first Alpine amp, and I am really impressed with it. It is pushing a single JL 12W0V3 and it hits hard!

Pros: Too many to list

Cons: None

Alpine says it all!

Eddie F from Ohio on 7/28/2015

Crutchfield Customer Review (What's this?)

i'm a true believer of you get what you pay for. I'm not going to win any DB drag contest with it but it completed my all around sound with a nice deep clean bass. My Kicker comp vz 12" never sounded so good.

Pros: too many to list.

Cons: none so far

Alpine / JL Subwoofer

Tim L from Clemmons, NC on 5/5/2015

Crutchfield Customer Review (What's this?)

Great components, the installation on the sub woofer was somewhat difficult but I called a buddy and he came over and helped

Pros: Great Sound, fits great and you can't even tell it's there! Seats fold down without an issue!

Cons: Make an insert that you could just fit right into the same piece that you have to cut out,to install your sub woofer, but that is the process!

Alpine MRX-M110

Tim D. from Louisiana on 3/22/2015

Crutchfield Customer Review (What's this?)

Purchased this amp after having the infinity 611a for some time. I needed a little more power to push my new JL Audio 10TW3-D4's This amp is very powerful and after having it over a month I'd say it's well worth every penny!

Pros: Operates cool at 1ohm. Great power for multiple subwoofers.

Cons: None.

great still want more

greg from Fairbanks, AK on 3/11/2015

Crutchfield Customer Review (What's this?)

Works great running 2 type s10 dual 2 ohm subs

Pros: Small size stays cool

Cons: The amp gets louder with the remote gain you have the gain full high on the amp and then the remote full to get true full gain why do amps with remotes work like this?

Great amp!!!

Danny Dan from Orlando on 1/18/2015

I got this amp and have it pushing an XFL 12 @ 2 ohm. I have it on the nominal setting and it is more than enough bass for what I need..."CLEAN" bass. I love it!

Pros: Power


small package huge power

Rob from seaside california on 12/28/2014

Very nice amp, easy to install and tune. I have it in my ranger ext cab on 2 swr10d2 subs and it's gonna rattle my truck to pieces. I have it tuned at 25hz. I literally need ear plugs now cuz I can't keep the volume down.



Alpine MRX

JR from Hinesville GA on 11/9/2014

Grate Amp for the money Lots of power solid bass hard hitting

Pros: Good hard hitting bass

Cons: None

Great product

Michsel from anchorage alaska on 10/16/2014

Crutchfield Customer Review (What's this?)

This amp was worth the money, I have it on two 12" type Rs and it does what I expected. I plan on buying another one and getting 2 more 12s for a 4 12 set up.




Randy from Yuma , az on 9/2/2014

Crutchfield Customer Review (What's this?)

Purchased amp to pump 12"type r,for sons first stereo. Been out of the loop for many years and didn't know what's good or bad. One thing you never forget is u can't go wrong with alpine. Put it this way he won't forget his first stereo.

Pros: Hits hard

Cons: None


TERRY from CORBIN KY on 7/9/2014

Crutchfield Customer Review (What's this?)



Cons: NONE

Awesome sound

Brian from Texas on 5/5/2014

Crutchfield Customer Review (What's this?)

I combined this speaker with an Alpine mrx-110 amp and it sounds awesome.

Pros: Great sound

Cons: A very large and heavy speaker

Amazing Product!

RC from Albany, NY on 4/4/2014

Crutchfield Customer Review (What's this?)

This amplifier works amazingly! My subwoofer gets a great kick out of it, maximizing its potential. For reference, i have the Alpine SWR-12D4 and it was a huge step up from the 12 inch Kicker CVR. For a noticeable increase in bass, definitely invest in this!

Pros: Easy setup, leads to quality bass provided you have a matching subwoofer. Great product and

Cons: Makes the sub so powerful, your car may rattle. This would probably happen no matter what, so if you do get the amplifier, be sure to invest in hush mat or something to reduce the rattle in your car.

great match

Anonymous from kewanee IL on 3/31/2014

Crutchfield Customer Review (What's this?)

Teamed it up with alpine type r 12.. pushes real nice

Pros: great quality

Cons: None as of now

Awesome Amp!!!

Chris from Fl on 1/23/2014

Crutchfield Customer Review (What's this?)

Awesome amp!!! Pushes my speakers to the max!!

Pros: Great price for the wattage!! Runs cool!!

Cons: None.

Alpine MRX-M110

John from Long Island , NY on 9/8/2013

Crutchfield Customer Review (What's this?)

This unit rocks. Went from hifonics 500 x 2 bridged. Not even close in comparison. The alpine drove my subs with fierce power. Very tight controlled sound. Have an old kenwood excelon kdc X615 with only 1.8 volt pre out n I still have the gains only set 3/4 or I will blow the subs out of the box. The birth sheet came as 1152 watts @ 2ohms. Didn't even fine tune it yet and I'm already satisfied. Thought my subs where shot but the hifonics unit is junk. It's hooked up to 2 infinity 10" subs in a sealed box. And it hits hard. I like the sq better than spl. You could go for spl but better get high end subs that can take it. You won't be disappointed. Be careful with the gains,set the adjustments right first then adj. your gains. Had to take all the bass enhancements off, draw a flat response from the head unit then adj. the amp controls, then go back to the HU and do final adj. from there. Def worth every penny. The name speaks for itself. Can't speak for longevity yet since its still new. Makes my subs sound new again. Nice clean controlled sound.

Pros: Strong tight clean controlled bass. Lots and lots of power. Very easy to set up.

Cons: None

Tons of Power!

victor from NorCal on 8/30/2013

Love this AMP!! Well worth the money. I bought this to power a single rockford fosgate P3 12 (wired at 1 ohm in factory box). I have the amp turned up about 3/4 of the way and it POUNDS! This amp puts out plenty of clean power with no distortion. All of the wiring terminals feel very solid so there is no worry about loose cables.

Pros: Lots of clean power

Cons: none

Alpine MRX-M110

robert from saginaw mi on 7/16/2013

Crutchfield Customer Review (What's this?)

Works great.



Strong Amp for the $$$!

Josh L from Staunton, VA on 6/4/2013

Crutchfield Customer Review (What's this?)

So I needed an amp to push a Rockford P3 slim requiring a 1 ohm 400 rms. Its in my nature to over do things and figured that one couldn't go wrong with Alpine in mind. At 800 rms @ 1 ohm, its needless to say this amp hits hard and is turned way down to prevent blowing up the speaker. It has a birth chart rating it a 1138 rms @ 2 ohms and I believe it!

Pros: Great cost, Alpine quality, looks awesome, performs even better

Cons: None

Pound it!!!

Danny from Nampa, ID on 5/2/2013

Crutchfield Customer Review (What's this?)

Have this amp hooked up in my 2007 Accord to 2 Alpine Type-R12's 2 ohm load in a sound ordinance box. "The 12's are last years model" My gain is set about half way and these speakers POUND! Kinda worried this will make my car fall apart. Even my headliner was flexing. I ran it for about five minutes of playing Bass 305 stuff and the amp was still cool to the touch. Birth sheet rated my amp 1147 watts, 2 ohm load @14 volts. Very happy with this amp!

Pros: Great looking Very powerful


Great amp

Nick from Milwaukee WI on 2/23/2013

I got this amp for a vary low price and I could not let it pass and I'm so happy i got it. This is the best amp you can buy that's out there. I got this amp on a alpine type r 15 and this is the best sound that I have ever had in my car its clean and strong and with the stinger 5f cap it has all the power it needs

Pros: Great amp

Cons: There are none


ZackDoe from chciago, IL on 10/7/2012

So i had this amp pushing 2 kicker comp 12" subs. each were 150RMS. well obviously you know what happened. this amp pushes WAY more than 300 watts RMS so when i really started pushing the subs the right one started smoking. it still works but its alot quiter and makes a suttle rattle. and it still smokes. so im gonona get two kicker compVR's instead and hopefully those will actually push and not blow up

Pros: great amp. way more power than i needed apparently

Cons: blew my stuff up.

Great amp!

Lee W from Canada on 7/12/2012

This Amp is well worth the money, It drives my two jack hammers insanely hard and the settings are turned down low. My friend has the same subs with a 900 watt Kenwood all settings turned up high and this amp pounds them twice as hard!




Hands-on research

Product Research



MRX Amplifier Design: Class-D amplifiers boast higher efficiency, produce less heat, and draw less current than traditional Class-AB amps. The MRX series benefits from the technology trickledown from Alpine's more expensive PDX amps, including Direct FET final outputs, thermal management processor, 6-Layer Glass Epoxy PC Board; combining to create a high-end sound quality without the bulky heat sinks required by most amps in this power class.

STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.

Power Management Processor: The multi-stage Power Management Processor continuously monitors component temperatures throughout the amplifier and decreases power output if anything gets too hot. When playing music under heavy loads for long periods, the circuit automatically reduces power output slightly at first, and then further in a second stage if necessary. This two stage approach provides an interruption free listening experience.

CEA 2006 Compliant: The MRX-M110's power ratings are measured according to the Consumer Electronics Association CEA-2006 standards. These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers, even different brands. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. The power output is measured from 20 Hz to 400 Hz using a 14.4 volt power supply with no more than 0.01% THD+N:

  • 4-ohm: 650 watts
  • 2-ohm: 1100 watts
  • 1-ohm: 800 watts

Signal-to-Noise: When measured under CEA-2006 conditions (reference 1 watt into a 4-ohm load) the signal to noise ratio is 90 dBA. Measured at the rated power output S/N is 117 dB.

Verification Certificate: The amplifier comes with a certificate that lists the RMS power output measured from that specific amplifier. It also lists the model number, serial number, test date, and the test conditions (voltage and impedance).

Auto Turn On: When using the speaker level inputs the X-Power amplifiers automatically turn on when voltage is detected on the signal inputs, making them an easy factory system upgrade.

Low Output Impedance: With low output impedance, the MRX-M110 outputs tightly controlled bass, with a damping Factor rated at greater than 1000.

LED: The top panel LED power indicator glows blue when the amplifier is turned on.


Gain: The MRX-M110's gain is set according to the level of the incoming signal. The line-level input gain setting is continuously variable from 100 mV to 4.0V; the speaker-level input gain setting is continuously variable from 250 mV to 10.0V.

Crossover: The low-pass crossover point is continuously variable from 50 to 400 Hz and the slope is 24 dB/oct; the crossover cannot be bypassed.

Subsonic Filter: The amp also has a 24 dB/oct subsonic filter, continuously variable from 5 to 30 Hz.

Bass EQ: Bass boost can be applied to the subwoofer output; it's variable from 0 to +12 dB and centered at 50 Hz.


Power/Ground/Remote: The MRX-M110 features set-screw terminals for the Power, Ground and Remote Turn-on inputs. The Power and Ground terminals will accommodate up to 4 gauge wire (Alpine recommends 4 gauge for cable runs over 3'), the Remote Turn-on terminal will accept up to 8 gauge wire.

Speaker Output: The speaker outputs terminal is also set-screw terminals and will accept up to 8 gauge wire.

Line Input/Output: Line level RCA is the preferred input connection. The full range stereo line output allows easily adding another amp without running a second set of cables.

Speaker Level Input: Use the included speaker level input harnesses if the connected radio has no preamp outputs.

Fuses: The amp is protected by four chassis mounted 25-amp ATO fuses.

Remote Bass Control (optional): Alpine's RUXKNOB wired remote (sold separately), connects to the amp's RJ-25 Remote Bass Control jack, and offers control of the subwoofer output level from the front of your vehicle. The linear attenuation can be adjusted from 0 to -20dB.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Alpine quality, great price. You can never have too much sub power. [ PEDRO  Nov 25, 2016 ]
The " price per watt " is unbeatable [ robert guilmette  Sep 25, 2016 ]
The price was great as well as the reviews. [ Cameron  Sep 02, 2016 ]
I picked this sub entirely based on what my rep Ringo advised. Its going to power an Alpine 12 type R and matches up perfectly. It was a great recommendation. [ Anthony  Jul 28, 2016 ]
Need more power [ joseph  Jun 04, 2016 ]
Fits my impedance, power handling range, and matches my other components. [ Valerie  May 24, 2016 ]
I picked this item based on my love for Alpine and how their products sound. I read reviews and went online to hear how this amp sounds and it pounds. I have a lot of options with this amp. It could put out 1100 watts, 800 watts, or 650 watts. [ William  Dec 04, 2015 ]

12 questions already asked

Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Kenny  Aug 19, 2016 ]  Staff
Great question, typically the lower the ohm rating the more power drawn through the amp. I own this amp and considered the fact that the amp outputs less watts at 1 ohm than 2 ohm is indicative that it is not as stable in 1 ohm operation. [ GUNNER  Aug 19, 2016 ]
I took it to a shop and they did everything [ JUAN J  Mar 05, 2016 ]
Hook the positive lead to both positive on the speaker and same for the negative. It will operate at a 2 ohm load. [ Timothy  Mar 05, 2016 ]
Jumper the neg to neg and pos to pos. The sub should of came with two jumpers. Then you tie one neg and positive from amp to sub, doesn't matter which one since you bridged them with the jumpers. [ mike  Mar 05, 2016 ]
If your two speakers are both single voice coil 2ohm speakers then you wire the speakers as follows. Negative from amp to negative of #1 woofer, #1 woofer positive to negative on #2 woofer. Then positive from amp to positive on woofer #2. This will make the amp run at 1,100 watts Rms. Which is actually 550 Rms to each woofer. More than enough power for two 10" or 12" woofers [ Timothy  Jan 04, 2016 ]
I lost one of mine before I even got it installed! All u have 2 do is take 1 to a local electronics or auto parts store and they will b able 2 match it. [ Raymond  Mar 24, 2015 ]
I would call alpine and ask them most companies have a way to order those odd parts [ Gregory  Mar 18, 2015 ]
Call Alpine Directly. [ JEREMIAH  Mar 18, 2015 ]
Crutchfield where else [ BRYAN  Mar 18, 2015 ]
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  Jan 21, 2015 ]  Staff
I have to kicker 12 inch cvx subwoofers. How should I wire them to this amp For best performance? [ Abel  Mar 14, 2015 ]
that works should sound just fine, but i switched to a swr 10 d4 and put in the smallest proted box i could get and it seams to sound better than that 12 [ STEPHEN C  Sep 06, 2014 ]
Yes this amp would be great for this setup. Looks like that type r rms is 300-1000w. So that 650 would be a perfect sweet spot. I used mine on two older the original type r 10". But after about a month blow on of them out because of the power. This was expected. It just now gives me a reason to try out my alpine type x on it now. [ joshua  Aug 27, 2014 ]
Yes it will be. I had the Alpine 10's (DVC) hooked to it and it sounded amazing. Plus there alot of ajustments to tweak it to your setup. [ JEREMIAH  Aug 26, 2014 ]
I had an Alpine Type R paired to this amplifier and my subwoofer popped twice. There is too much power coming from this amp to your sub, and I had to return it to Crutchfield both times. I would say get a less powerful amp than this one, or else a much better subwoofer. The type R was decent, but then I upgraded to a Rockford T0, which produced much better low notes and paired with the amplifier much better than the Alpine. [ RITESH  Aug 26, 2014 ]
Get the swr12d4 and wire it to 2ohms you will get 1200watts and that sub will hit hard. I have the 10inch version with 1200 watts. You will definitely get better sound quality with that sub with 1200 watts [ DEVIN  Aug 26, 2014 ]
You would be better off getting a dual 2 ohm type r as this amp makes 800 watts at 1 ohm and 1100 at 2ohm. [ JOSHUA  Aug 26, 2014 ]
Yes it will but it would be much better with two off those subs. I have the same setup but had to turn my amp levels really low because it blew the sub out. I only have 1 sub but thinking of getting another rich would sound a lot better keeping the amp at low levels. [ JARETH  Aug 26, 2014 ]
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Jul 01, 2014 ]  Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Apr 10, 2014 ]  Staff
Thanks for your question. This amp would actually not be a good match for those subs. This mostly has to do with the wiring configurations that are available to you. For information on comparing amps I would recommend reaching out to an Advisor by phone or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Jeff  Jan 07, 2014 ]  Staff