Skip Navigation

StreetGlow LED Muffler Tips

Trim out your tailpipe with hot colors (Orange)

Item # 546LEDTPOR

This item is no longer available.

Shop all Tail Pipes w/LEDs

Overview

Our take on the StreetGlow LED Muffler Tips

Fine-tune your vehicle's look right down to the tailpipe! StreetGlow Muffler Tips come in nine different colors, so no matter what your style is, we've got one to match it! The slotted-chrome housing diffuses the internal LED lights for a stunning display.

Fine-tune your vehicle's look right down to the tailpipe! StreetGlow Muffler Tips come in nine different colors, so no matter what your style is, we've got one to match it! The slotted-chrome housing diffuses the internal LED lights for a stunning display.

Installation is straightforward — simply slip the tip over the end of your exhaust pipe, and secure in place by tightening the setscrews. Three adjustable mounting brackets allows the muffler tip to fit onto tailpipes from 1" to 2-1/4" in diameter. A 6-foot wiring harness lets you tap into your vehicle's existing tail light wiring for power and ground. 2-year warranty on parts only.

Note: Laws governing the use of custom lighting vary from state to state. These products are not street legal in some states, and are recommended for off-road or show-car use only. Please check with your local authorities before purchasing.

What's in the Box:

  • LED Exhaust Tip with attached 6" power/ground wiring harness
  • 68" Power/Ground wiring harness with in-line 2-amp fuse
  • 3 Mounting brackets
  • Three 10mm bolts
  • 3 Lock washers
  • Instruction card
Reviews
Details

Hands-on research

Product Research

Features
Warning Note

Features

Installation: The LED Exhaust Tip is designed to slip over the end of your vehicle's existing tailpipe. There are three adjustable mounting brackets, allowing you to install the Exhaust Tip onto tailpipes from 1" up to 2-1/4" inches in diameter.

Wiring: The supplied wiring harness lets you connect the LED Exhaust Tip to your vehicle's existing tail light wiring or your own custom wiring circuit. The wiring harness is over 6 feet in length, and consists of 22-gauge power and ground wires. There is a 2-pin plug on the wiring harness for easy removal of the Exhaust Tip.

Warning Note

Street Use Warning: The LED Exhaust Tip is recommended for show and off-road use only. It may not be street legal in some states. For more information, please check with your local authorities.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.