Skip Navigation

Rockford Fosgate P1-1X10

Punch P1 10" ported enclosed subwoofer

8 Reviews | 2 questions - 2 answers

Item # 575P11X10

In Stock

Ships Today

Calculating shipping cut-off...

Was: $179.99

Special Purchase: -$50.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Rockford Fosgate P1-1X10

Rockford Fosgate's P1-1X10 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure's Punch P1 10" woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.

Rockford Fosgate's P1-1X10 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure's Punch P1 10" woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching.

Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

This sub does the trick!!! Buy a matching punch amp and you will not be disappointed...and if you really want you hat to rattle off your head buy a second...holy bass!!!

thomas, Oregon, IL

What's in the Box:

  • Vented subwoofer enclosure loaded with one Punch P1S4 10" Woofer
  • Installation and Operation Instructions

Product Highlights:

  • ported hatchback-style enclosure with one 10" Punch P1 subwoofer
  • 5/8" medium density fiberboard construction covered with black carpet
  • 4-ohm total impedance
  • power handling: 50-250 watts RMS
  • peak power: 500 watts
  • frequency response: 30-250 Hz
  • sensitivity: 85 dB
  • 17-1/16"W x 13-1/4"H x 16-1/8"D1 x 13-7/8"D2
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate P1-1X10 Reviews

Average Customer Review(s):

(8 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Punch Woofer: The enclosure houses one front-firing Rockford Fosgate Punch P1S4-10 10" subwoofer. The 4-ohm, single voice coil sub features a StampCast steel frame, a Kevlar fiber reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Spider: A compliant linear spider made from tear and fatigue resistant poly-cotton improves mechanical stability under high excursion, maintaining consistent excursion characteristics.

Solid MDF Construction: The enclosure is constructed of high quality 5/8" MDF (medium-density fiberboard), which resists flexing and has anti-resonant qualities.

Vented Enclosure: The vented enclosure is aided by precision construction through computer design. The enclosure consists of one front firing 10" Punch P1 series subwoofer with a proprietary high-flow, low-noise port. The speaker terminals are located on the left side of the box (when facing the box). The box is covered in black carpet.

Tuned Port: The enclosure uses a front-firing proprietary high-flow, low-noise port to help produce deep and loud bass efficiently.

Box Carpeting: The enclosure is finished with high-density carpeting for superior durability. The carpet is black.

Speaker Terminal: The subwoofer enclosure uses one pair of high current, spring loaded binding posts. The binding posts are located on the left side of the box and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.

Power Handling: The subwoofer can handle up to 250 watts RMS; 500 watts peak power.

CEA-2031 Compliant: Power handling on the P1S4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Dimensions: The depth dimensions listed in Features & Specs include the subwoofer's trim ring, which adds approximately 7/8 of an inch. The depth of just the enclosure is 15-1/4 inches at the base and 13 inches at the top.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Wonderful things heard about you guys. [ John  May 04, 2017 ]
REVIEWS [ Dennis  Apr 24, 2017 ]

2 questions already asked

I forwarded your question to an Advisor and they responded with the following: It does not come with a grill. You can get the P1G-10 grill for it and install it as shown in the picture. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Dec 12, 2014 ]  Staff
I forwarded your question to an Advisor and they responded with the following: You would want the amplifier to be between 250 and 400 watts. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Jun 10, 2014 ]  Staff
Articles