Skip Navigation

Rockford Fosgate Punch P1675-S

6-3/4" component speaker system

24 Reviews | 3 questions - 21 answers

Find what fits your vehicle

Can't find your exact vehicle?

Item # 575P1675S

In Stock

Was: $199.99

Special Purchase: -$75.00

Installation gear for most cars

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Rockford Fosgate Punch P1675-S

Rockford Fosgate designed the Punch P1675-S component speaker system as a high-grade replacement for your factory speakers. Each 6-3/4" woofer features a responsive polypropylene cone and butyl rubber surround that'll stand up to hours of high-volume jams. The separate dome tweeters provide clear, extended highs that can hold their own when the bass gets heavy.

High-quality replacement speakers

Rockford Fosgate designed the Punch P1675-S component speaker system as a high-grade replacement for your factory speakers. Each 6-3/4" woofer features a responsive polypropylene cone and butyl rubber surround that'll stand up to hours of high-volume jams. The separate dome tweeters provide clear, extended highs that can hold their own when the bass gets heavy.

Side view of P1675-S 6-3/4"

The poly woofer and butyl rubber surround give you solid bass.

Rockford Fosgate innovations

Take a closer look and you'll notice a couple of cool innovations. Rockford Fosgate uses a new technique to attach the surround to the cone that yields up to 25% more cone area, for fuller sound and stronger performance. They build the crossover into the speaker frame so you don't have to find an area to mount a separate box. The slots around the frame eliminate the need to redrill screw holes when the factory holes are just a little bit off. Grilles are included.

Note: The oversized terminals on these speakers won't connect to a Crutchfield wiring harness. A free 10-pack of female quick slides that you can splice onto our harness will be included with your speaker purchase.

Great sound for the price

Anonymous, Chico, CA

What's in the Box:

  • Two 6-3/4" Woofers
  • 2 Woofer grilles
  • Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
  • 2 Front flush mount brackets
  • 2 Rear flush mount brackets
  • 2 Surface mounting housings
  • 2 Tweeter trim rings
  • Two M4x25mm Machine screws
  • Two M4x10mm Machine screws
  • Two M4x15mm Stud bolts
  • Eight 1-1/4" Allen head screws
  • 3mm Allen head bit
  • 8 Speed clips
  • Two 40" Lengths of tweeter speaker wire (each with male quick slides on one end and female quick slides on the other)
  • Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
  • 6-3/4" mineral-filled polypropylene woofer
  • butyl rubber surround
  • 1" polyetherimide (PEI) dome tweeter
  • crossovers built into woofer baskets
  • Vertical Attach Surround Technique (VAST™) increases cone area
  • power range: 6-60 watts RMS (120 watts peak power)
  • frequency response: 55-22,000 Hz
  • sensitivity: 92 dB
  • top-mount depth: 2-1/4"
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate Punch P1675-S Reviews

Average Customer Review(s):

(24 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design 1" Dome
Tweeter Composition Treated PEI
Woofer Composition Mineral filled IMPP
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 89
Sensitivity at 2.83 volts 92
Frequency Response 55 - 22k Hz
Minimum RMS Wattage 6
Maximum RMS Wattage 60
Peak Power Handling (Watts) 120
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 1/4
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5 5/8

Product Research

Features

Injection-Molded Polypropylene Woofers: The woofer cones are mineral filled, injection-molded polypropylene. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.

Butyl Rubber Surrounds: The butyl rubber surrounds dampen unwanted harmonic distortion while maintaining linear geometry under extreme weather conditions. This leads to less distortion, superior frequency response, and superior durability.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.

Mounting: The tweeters have multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:

  Flush Surface 10° Surface 30°
Mounting Height 0.446" 1.075" 1.265"
Mounting Depth 0.911" Screw Depth Screw Depth
Frame Diameter 2.357" N/A N/A
Cutout Diameter 1.75" N/A N/A
Frame Width N/A 2.130" 2.130"
Frame Depth N/A 2.162" 2.140"

Crossovers: The high-pass crossovers are integrated into the baskets of the woofers. The slope is 12dB per octave.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Staff Reviews

Product reviews from the Crutchfield Labs

Four popular car speaker lines
by Robert Ferency-Viars

We listen to Alpine Type-S, Polk Audio DXi, Infinity Reference X, and Rockford Fosgate Punch car speakers in the Crutchfield Labs.

What are the Labs?
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I was looking for a Rockford system and these speakers had very good reviews and they also go with the punch p3 woofer that I have. [ Brandon  Oct 25, 2016 ]
I liked the reviews on Crutchfield and RF products are always top notch. [ Hugh  Jul 20, 2016 ]
Trust the brand [ Todd  Apr 20, 2016 ]
RFP- nothing need to be said. [ Will  Apr 01, 2016 ]
Best reviews and fits my application. Sale price enabled me to buy a second pair for the rear doors. [ Quinn  Mar 16, 2016 ]
so far, so good. Still need to get them installed. I'm waiting on the brackets. [ L  Mar 13, 2016 ]
These are good speakers at good price. [ CHARLES  Mar 10, 2016 ]
I have the Punch 1675 speakers in the rear doors and they sound great when amped. Can't go wrong with Fosgate [ Kenneth  Dec 17, 2015 ]
Daughter told me this was what her husband wanted for xmas, and wanted it from crutchfield because they give technical support [ Vicki  Dec 10, 2015 ]

3 questions already asked

no [ Mr.  Jul 28, 2016 ]
No. I am running them off the 50 watt RMS head unit. They sound and perform great. Hope this helps. [ ROBERT  Jul 28, 2016 ]
I have installed this speaker with and without an external amp. The speaker is definitely an upgrade from factory without an external amp but I installed the speaker with a kenwood xr-5s amp which has 80 watts rms at the speaker channel and they sounded much better. [ Will  Jul 28, 2016 ]
No they don't. I have a fosgate amp running mine. And they sound great [ MIKE  Jul 28, 2016 ]
No they dont. I used to run them on head unit power and they had enough volume. But now i have them amped. Pretty good speakers [ Deborah  Jul 28, 2016 ]
Not required but definitely recommended. Mine are powered by a Fosgate PBR series amp. [ Kenneth  Jul 28, 2016 ]
the crossover is built into the speaker so you will want to use both the mid and the tweeter....they do provide plenty of wire so you can mount them where ever you need. Hope this helps. [ EUGENE M.  Jan 14, 2015 ]
Typically tweeters are placed in front of the listener for best listening (usually on top of the front dash). some sounds might sound off but as long as wiring is in place there shouldn't be a functional problem [ Logan Van  Jan 02, 2015 ]
Yes I separated the tweeters and put them in my dash with the mid in the door. [ JAMES C  Jan 02, 2015 ]
Mike, I purchased 2 pairs of these speakers. I installed the tweeters in the columns along the front and rear windshields of a Tahoe and installed the mid-ranges in the doors. Both locations were the original locations of existing speakers. I'd check with Crutchfield's experts but I believe in order for the speakers to function properly they need to both (tweeter & mid-range) be installed. Hope this helps. BTW, the speakers sound great. I run them through an amp with a sub. [ CHARLES  Jan 02, 2015 ]
in theory you could. But the crossovers are integrated into the woofers so you would have to make sure the frequency coming into the tweeters was proper. I'm not sure under what your installation circumstance is but this might not be the right setup for you. If you are going to install the woofers later, you might just want to get a setup with a proper free-standing crossover so you can just wire the tweeters first and then wire in the woofers later. [ JOSEPH  Jan 02, 2015 ]
The tweeters are completely separate from the woofers. In this case, the tweeter needs to be wired to the woofer. The frequency crossover is built in to the woofer housing. It is going to be more important to have a prewired location for the woofer, then your tweeter can be located just about anywhere after that. [ Christopher  Jan 02, 2015 ]
I used them with the factory wiring already in place in my Buick Verano... I used the tweets in the upper doors and front dash... The mids I placed at the bottom of the doors... IE: used the factory wiring but placed the speakers seperatly to fit the existing car... Worked for me and sound great... As to your specifics I can't say but you can use the speakers seperatly. Good luck [ RICHARD J  Jan 02, 2015 ]
Mike, I purchased the p1675-s and installed them in my Silverado pickup but I had a factory location to mount them that made the installation very easy. You can mount these anywhere you like but keep in mind that shoulder level is the best for sound. Below is a link to an article from Crutchfield's site. http://www.crutchfield.com/S-fa7ln9Ey2yz/learn/raise-the-soundstage.html Hopefully that is what you needed if not call their customer service they are top notch. You won't be disappointed. They helped me tremendously during my installation replacing my entire system. [ JAMES  Jan 02, 2015 ]
I'm not sure I totally understand your question. If you'd like to skip installing the mid range and just install the tweeters I don't see any reason why that would be a problem except you're not going to get to use the tweeter crossover because the crossover is embedded in the mid range speakers. However, I think you're better off finding a set of just tweeters--there isn't any point in getting this set just to have the tweeters if you're not planning on using the mids at all. [ Daniel  Jan 02, 2015 ]
Joe T, Yes they have the crossovers built into the mid's on the speaker you can't even tell they are there. That makes it a lot easier to install. You will not have to find a place to install the crossover. These speakers sound amazing! I highly recommend them for the price. The lows did not impress me, but I have a sub so it didn't bother me. [ RYAN  Apr 28, 2014 ]
Cross-overs are built into soeakers. I have 2 sets installed on my son'sTahoe & added a sub, amp and audio controller. Great speakers, [ CHARLES  Apr 28, 2014 ]
No, there are not external crossovers. That is one of the perks of this model. The cross overs are internal making wiring easy and not havering to find a spot to place the cross over. [ JASON G  Apr 28, 2014 ]
They have internal crossovers--just plug the tweeters into the midrange speakers. [ Daniel  Apr 28, 2014 ]
The crossovers are built into the frame of the Woofer. This makes the installation much simpler as you don't have to mount and wire in a separate crossover filter. I really like these speakers. I installed them in my motorhome dash and window pillars and they sound great. With a good equalizer and bass boost they even put out good enough bass that I decided to not install a separate powered subwoofer. [ DARRELL  Apr 27, 2014 ]
They are built in the the unit. There are four of the connection tabs. Two on top say + twtr -. [ Patrick  Apr 27, 2014 ]
Articles