Rockford Fosgate Punch P1S2-10
2013 Subaru XV Crosstrek
Crutchfield Customer Review (What's this?)
Great Sub for the $!!
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S2-10 10" subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S2-10 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system. The sub's 2-ohm impedance will draw maximum wattage from your mono sub amp.
To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 375 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
Great Sub for the $!!
Joseph, Comstock Park, MI
Average Customer Review(s):
Great Sub for the $!!
Very happy with the product and has a great sound and simple to instal
Pros: Simple, Great Sound
I have Rockford Fosgate subs in my other vehicles and was adding a sub to my 2016 Mazda CX 5. I wanted this one (single 2 Ohm) but it's an older model and nearly everyone is sold out. Crutchfield had it and it's working and sounding great. It's in a .85 enclosure that doesn't take up a lot of space but still adds the thump I wanted.
Pros: Easy install, met my requirements exactly
Delivered very fast, installation took a few seconds once tuned it sounds awesome!
I bought the Rockford Punch P1S2-10 to replace my older alpine sub. The sub burned up within two days! I had my amp set on conservative settings and I even plugged my alpine sub back in after the rockford burned up and it worked great again. This was a terrible product and a terrible purchase.
Pros: Sounded decent for the 4 hours it actually worked.
Cons: Burned up really QuicklyCrutchfield response on 11/21/2016 Whenever you encounter a problem with anything you purchase from Crutchfield, especially a situation like this, please contact our Customer Support team. Purchases from Crutchfield can be returned or exchanged within 60 days of the purchase.
Love these subs....i have a 04 Gmc Sierra 1500 Extended Cab and have 2 of these in a vehicle specific sealed box and man do they thump....nice clean bass and real hard punch
I wanted to upgrade from an 8in kicker mounted in a factory enclosure in my 4runner. What a difference. Good clean base with twice the thump. 300w is plenty for this speaker.
Pros: Tight clean base w/ the sound ordinance box.
Cons: Had to buy punch speaker grill separately
Had a sealed box at .90 cubic inches. I searched high and low,in my price range,for a sub that would sound great in this box of mine. The fosgate fit perfectly. Sounds so great compared to many of my friends subs. Very low and punchy. Would buy another if I had a place to (tuck it away). Highly recommend for a 2 ohm sub.
Pros: I got one!!!!!!
Cons: I wish I had more lol.
This speaker was very easy to install and it sound amazing. Definitely worth the money!
Pros: Easy to install Sounds Great Good quality
|Cone Material||Kevlar reinforced paper|
|Ideal Sealed Box Volume (cubic feet)||0.59|
|Ideal Ported Box Volume (cubic feet)||1.4|
|Port diameter (inches)||3|
|Port length (inches)||8|
|Dual Voice Coil||No|
84 dB at 1 watt
|Frequency Response||23 - 250 Hz|
|RMS Power Range (Watts)||50-250|
|Peak Power Handling (Watts)||500|
|Top Mount Depth (inches)||5 5/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Overview: The Rockford Fosgate Punch P1S2-10 is a 10-inch subwoofer with a single 2Ω voice coil. The sub features a StampCast steel frame, quick-release compression terminals, a Kevlar fiber reinforced paper cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Steel Basket: The P1S2-10 subwoofer features a StampCast steel basket for added rigidity.
Compression Terminals: The P1S2-10 features spring post terminals which accommodate speaker wire up to 10 gauge.
CEA-2031 Compliant: Power handling on the P1S2-10 conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just instantaneously, that over time, can damage voice coils.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Trim Ring: To improve the cosmetic look, a decorative trim ring is included that mounts over the flange of the woofer. When using the PVC trim ring the woofer is first mounted with four screws, then the ring is placed on top of the woofer, aligning the final four holes of the woofer with ring. The other four screws are used for these holes to mount the ring and woofer to the enclosure. The trim ring increases the mounting height of the woofer to 7/8 of an inch and the frame diameter to approximately 11-1/4 inches.
Sealed Box: Rockford recommends a sealed enclosure with an optimum internal volume of 0.59 cubic feet (from 0.5 to 0.85 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: Rockford recommends a ported enclosure with an internal volume of 1.4 cubic feet using one 3" diameter x 8" long port; this yields a tuning frequency of 37.3 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 32 Hz).
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Was on Sale and comes with mounting screws as well, already have a custom built 10" tune port box and also wanted a 2 ohm to take advantage of the 300 watt over 200 watt at 4 ohm. from my JVC 5 Channel amp matched with a JVC Stereo Head unit I got here last year.[ M Feb 28, 2017 ]
price and the fosgate punch name[ JAMES Jan 13, 2017 ]
they hit real hard[ JAMES Oct 02, 2016 ]
Have always heard good things about Rockfords and now gonna see for myself[ Bryan May 06, 2016 ]
Looking for a 2-ohm sub for a good value. This one also advertises a low-end frequency response.[ Duane Mar 07, 2016 ]
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.[ Jeff Feb 25, 2014 ] Staff