Overview: The Rockford Fosgate Punch P1S2-12 is a 12-inch
subwoofer with a single 2Ω voice coil. The sub features a StampCast steel
frame, quick-release compression terminals, a Kevlar fiber reinforced paper
cone, and NBR surround (Nitrile Butadiene Rubber). An anodized aluminum voice
coil former and spider venting help keep the subwoofer cool.
Steel Basket: The P1S2-12 subwoofer features a StampCast
steel basket for added rigidity.
Compression Terminals: The P1S2-12 features spring post
terminals which accommodate speaker wire up to 10 gauge.
CEA-2031 Compliant: Power handling on the P1S2-12 conforms to
CEA-2031 industry standards. This means the subwoofer has the capacity to handle
its rated power under continuous demand, not just instantaneously, that over time,
can damage voice coils.
FlexFit Basket: The Flex Fit frame utilizes slots (where
possible) instead of single screw sized holes; allowing slight adjustment of
the speaker when mounted.
Trim Ring: To improve the cosmetic look, a decorative trim
ring is included that mounts over the flange of the woofer. When using the PVC
trim ring the woofer is first mounted with four screws, then the ring is placed
on top of the woofer, aligning the final four holes of the woofer with ring. The
other four screws are used for these holes to mount the ring and woofer to the
enclosure. The trim ring increases the mounting height of the woofer to 7/8 of
an inch and the frame diameter to approximately 13-3/8 inches.
Sealed Box: Rockford recommends a sealed enclosure with
an optimum internal volume of 1.02 cubic feet (from 0.7 to 1.8 cubic feet is
acceptable). Sealed enclosures provide the most control over a woofer, will
handle a lot of power, and provide accurate sonic reproduction, making them
suitable to all types of music.
Ported Box: Rockford recommends a ported enclosure with an
internal volume of 1.79 cubic feet using one 3" diameter x 6" long
port; this yields a tuning frequency of 36.3 Hz. Ported (or vented) enclosures
typically provide better overall efficiency than sealed so they are suitable
for use with smaller amplifiers, giving you more bass output from less power.
However, this efficiency comes at the expense of very low frequency output
(below 32 Hz).
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.