Rockford Fosgate Punch P1T-S
2015 Ford Edge
Crutchfield Customer Review (What's this?)
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Item # 575P1TS | MFR # P1T-S
$59.99pair Earn up to 60 Rewards points
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.
If your car's sound system is sounding a little dull, Rockford Fosgate's Punch Series P1T-S tweeters use a dome design that delivers clear, extended highs, so these tweeters can hold their own when the bass gets heavy. Separate crossovers send only the high frequencies to these tweeters, and you'll find three settings for adjusting tweeter output. You can flush- or surface-mount these tweeters, making it easier to find the perfect spot in your vehicle. These tweeters will bring out all the little details in your music that can get lost when your speakers are mounted low in your doors.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Manuel, Puerto Rico
Average Customer Review(s):
Have these installed in the front doors of an explorer, alpine head unit w RF punch 6x8's in all 4 doors, tweeters powered by a sony 2 channel amp, and Sony mono amp powering 2 sony 12's in a ported box. The clarity of these RF punch tweeters is unreal!! I knew the symbols were gonna come to life, but I was surprised at how clear all the vocals come through, I feel it made just as big of a difference as the subs, on the other end of the spectrum obviously. Definitely don't understand the bad reviews. Rockford Fosgate has always had a reputation for sound quality and products that last. These tweeters are no exception, get 'em, they'll help put your system over the top!!!!
Pros: The flush mounting system works great, makes for a nice tight mount, awesome looking cross-overs, great price, sound amazing
Cons: absolutely none!!!
Great product sounds amazing
The highs on these are incredible. Installed on Harley Davidson Street Glide and the sound is incredible over the wind and exhaust noise. Installed within old gauges. Easy install
Definately bring new life to the music for less cost you will hear the HI's your missing, only had them in a day but a big improvement. Listening is so indivdualized its tough to say hey these are the best etc. They drop right in the 1 inch tweeters OEM on a Nissan Titan 2011, these were easy to install and a great improvement over the OEM, can you do better probably but can you do better at this price point probably not so far so good.
Pros: Price point and sound quality
Cons: None yet
I am assuming these are the same tweeters that come with the Punch component 2-way speakers. I hate them. Ordered a set of JL silk tweeters to hopefully eliminate the harshness. My EQ cannot fix these.
Pros: Not much
These tweeters are very loud. That is the only thing good about them. The sound quality isn't there. The hi hats are very loud and harsh, while other things like bells and stringed instruments are quiet and tinny. Boosting the treble with the 13-band EQ on my DEH-P930 makes it even worse. They are powered by an old school Orion 280gx getting 80wrms per channel paired with an older set of Infinity 6x8 coaxial's with the separate tweeter wire un-hooked. It is not my system making them sound the way they do. These replaced a set of lower powered Kenwood tweeters which were also tinny sounding, but were much more even sounding. These Punch tweeters lack in bells and strings, but strive on hi-hats, which produces a very un-even sound that not even my EQ can fix.
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||3500 - 22k Hz|
|Minimum RMS Wattage||6|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||1|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||1 3/4|
Overview: The Rockford Fosgate Punch P1T-S is a dedicated tweeter system featuring lightweight PEI domes. The included tweeter housings allow flush or surface mounting (surface mounting at two different angles).
PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.
Mounting: The P1T-S provides multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:
|Flush||Surface 10°||Surface 30°|
|Mounting Depth||0.961"||Screw Depth||Screw Depth|
Crossovers: The tweeters include two passive, high-pass crossover networks. The slope is 12dB per octave and the crossover point is 3000 Hz. There are three positive input terminals, allowing you to attenuate the tweeter output; 0 dB, -2 dB, and -4 dB. The crossovers' dimensions are:
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
We listen to Alpine Type-S, Polk Audio DXi, Infinity Reference X, and Rockford Fosgate Punch car speakers in the Crutchfield Labs.
I choose Fosgate because of the quality that comes along with it. [ James Feb 09, 2017 ]
Recommended by Traffic Jamz in Hooksett, NH [ William Jan 04, 2017 ]
Because the door , back speakers and the sub are Rockford fosgate . I have a complete RF system. [ RYAN A Dec 10, 2016 ]
daughters car [ richard Dec 02, 2016 ]
wolf suggested them. Wolf's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=205 [ michael Mar 21, 2016 ]
I love Rockford fosgate best company for sound, durability, and good pricing [ kyle Mar 02, 2016 ]
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory speakers. They will be able to pull up your vehicle and see if they will integrate. If they do not, then they will also be able to discuss other options with you. [ Kenny Feb 22, 2017 ] Staff
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Kenny Feb 12, 2016 ] Staff