Skip Navigation

Rockford Fosgate Punch P500X4D

4-channel car amplifier — 75 watts RMS x 4

6 Reviews

Item # 575P500X4D

This item is no longer available.

Shop all Car Amplifiers

New model available


Our take on the Rockford Fosgate Punch P500X4D

Heat is the enemy of all amplifiers — sucking power away from your music and damaging internal components over time. Rockford Fosgate came up with some clever innovations that lower the heat generated in these Class D Punch amplifiers, improving efficiency and reducing their size so they can fit in almost any vehicle.

Heat is the enemy of all amplifiers — sucking power away from your music and damaging internal components over time. Rockford Fosgate came up with some clever innovations that lower the heat generated in these Class D Punch amplifiers, improving efficiency and reducing their size so they can fit in almost any vehicle.

Punch performance
The 4-channel Punch P500X4D amplifier sends 75 watts RMS to each of your front and rear speakers, giving you the crystal-clear power you need to hear the full impact of your music. You can also put the amp into 2-channel mode to drive a couple of subs with 250 watts RMS each. Separate front and rear frequency filters give you razor-sharp control over your speakers' clarity, while the onboard Punch EQ bass boost allows you to reinforce your music's low end when you're using a sub.

Small and cool
This versatile amp utilizes full-range Class D amp technology, drawing much less current from your car's electrical system than traditional amps, and generating tons of power from a remarkably compact chassis. Rockford Fosgate builds this amp using precision components assembled by high-speed, super-accurate robots — this Discrete Surface Mount system results in less interference between parts, lower operating temperature, and increased life for the amplifier. An amplifier that's built to last, packed with power, and fits almost anywhere — what more could you want for your music?

Product Highlights:

  • 4-channel car amplifier
  • 75 watts RMS x 4 at 4 ohms (125 watts RMS x 4 at 2 ohms)
  • 250 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • separate variable high- and low-pass filters (50-500 Hz, 12 dB/octave) for front and rear channels
  • separate variable bass boosts (0-18 dB at 45 Hz) for front and rear channels
  • full-range Class-D amplifier design
  • Discrete Surface Mount construction
  • 4-gauge power and ground leads and an 60-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended
  • 10-3/4"W x 2-3/16"H x 8-5/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • 4-Channel amplifier
  • 2mm Hex key
  • 4mm Hex key
  • 4 Self-tapping screws (length=1.5")
  • Installation & Operation Manual (Eng / Spa / Fre / Ita / Ger)

Amp was easy to hook and is working great. Plenty of power to drive my four speakers

JerryP, Massillon, Oh


Rockford Fosgate Punch P500X4D Reviews

Average Customer Review(s):

(6 Reviews)

Rockford Amp

JerryP from Massillon, Oh on 4/29/2013

Crutchfield Customer Review (What's this?)

Amp was easy to hook and is working great. Plenty of power to drive my four speakers

Pros: Looks great, works better

Cons: None

Great Amp

Chicano 310 from Torrance, CA on 4/14/2013

Crutchfield Customer Review (What's this?)

Great amp! Had it installed for over a month pushing 2 12's and 2 6x9's and it gives my 12's that punch it needs for a good bass.



Great Amp

Anonymous from Colusa,Ca on 4/7/2013

Crutchfield Customer Review (What's this?)

This works great doesn't give me any problems what so ever

Pros: Everything

Cons: Nothing

RF Knockout!

Deejay Kazz from Colorado Springs, CO on 3/3/2013

Crutchfield Customer Review (What's this?)

I bought this baby as an open box for less than the current sale price that is currently on at Crutchfield and it is worth every penny! I got a custom fiberglass sealed box made and installed with (2) JBL GTO804's to go under my back cab bench of my 2013 F150 and they only needed 1/2 the amp to run it leaving me the other 1/2 to run the (4) Polk db 571 on the doors when I am ready to "upgrade" The current amp of my Ford sync OEM is plenty for the db 571's for now though. I just bought the truck brand new and didn't want to mess with the OEM setup yet.

Pros: Awesome Power with flexible capabilities!...

Cons: None as of yet (but do not foresee any). Just got it installed a few days ago.

Rockford Rocks!

Bruan from Spring Hill, FL. on 11/26/2012

Crutchfield Customer Review (What's this?)

The amp showed up in excellent condition and in a timely manor. Haven't had a chance to use the amp yet, but I'm sure it's fine. Bought it to push 2 sets if components. Birth certificate said 648 watts. Rockford Fosgate amplifiers are the best Crutchfield has to offer. Costly but you get what you pay for. Will be buying more to finish my 5000 watt install.

Pros: Quality

Cons: Cost

Punch 500

Keith from Marrero, LA on 2/4/2012

Crutchfield Customer Review (What's this?)

This amp is an example of the evolution of Fosgate amps over the years. Back when I had my first one, the Punch 100, it had only a crossover. This amp has pass thru RCA inputs, gain controls, cross overs & bass boost. I am using it to power some 2 ohn Infinity Kappa seriess speakers, and it's really clean.

Pros: Features are great. Sound is there as it's putting out 500 watts into the 2 ohm speakers (4 x 125). Once you get it tuned, it's like the commercial: "Set it & forget it."

Cons: Just a bit thick as to where I lost my fold up seat option in the back of the F-150 Super Crew when I mounted it on a board behind the rear seat.


Hands-on research

Product Research



Overview: The Rockford Fosgate P500X4D is a 4x75-watt, Class-D, full-range, 4-channel amplifier. Class-D amplifiers are very efficient, which reduces current consumption from the vehicle's charging system.

Cast Aluminum Heatsink: The cast aluminum heatsink dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs.

DSM (Discrete Surface Mount): In the manufacturing process high speed robotics are used to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Power and Protection LEDs: Power and Protection LEDs are located on top of the amplifier. The Power LED glows red when the amplifier is turned on. The Protect LED illuminates yellow if a short circuit or too low an impedance is detected at the speaker connections. When any of the protection circuits engage, the amp automatically shuts down until the problem is corrected.


Control Panel: The P500X4D has top-mounted controls, covered by a removable panel. There are independent controls for the front and rear channels, and include the following:

  • Internal Crossovers: Each crossover can be set for high-pass, low-pass, or all-pass (full range) operation by a 3-way switch. The cut-off frequency is continuously variable from 50Hz to 500Hz, and has a slope of 12dB per octave.
  • Punch EQ: The Punch EQ can supplement low frequencies to give your music more impact and presence. The Punch EQ becomes active only when the crossover switch is set to low-pass, providing a bass boost of 0-18 dB at 45 Hz.
  • Gain: You can match the output of the connected source unit using the rotary gain control. The gain control can be set between 0 and 11.

2/4 CH Switch: On the front of the amplifier, you can switch the inputs to a 2-channel or 4-channel mode. When using only one pair of inputs, you can feed all 4 output channels by pressing in the 2/4 CH switch.


Power Connections: The power and ground terminals are nickel-plated set-screw wire connectors and will accommodate up to 4-gauge wire. An external 60-amp fuse (not included) must be installed on the power wire within 18 inches of the battery. If a wiring kit is used which includes a fuse with a value other than 60-amps, the original should be replaced with a 60-amp fuse. The remote turn-on terminal will accept wire sizes of up to 12 AWG. The supplied 2 mm and 4mm hex keys is required to tighten/loosen the terminals.

Differential Input: Differential input circuitry measures the voltage of both the positive (+) and negative (-) portions of the input signal, subtracting the voltage common to both conductors (noise), resulting in a cleaner signal. Reducing the noise on the input then improves the sound quality of the output.

Speaker Connections: The 4-channel nickel-plated set-screw wire connectors will accept up to 8-gauge wire. The supplied 2mm hex key is required to tighten/loosen the terminals.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.