Skip Navigation

Rockford Fosgate Prime R165-S

6-1/2" component speaker system

140 Reviews | 18 questions - 38 answers

Find what fits your vehicle

Can't find your exact vehicle?

Top Seller

Item # 575R165S

In Stock

Was: $99.99

Price Break: -$10.00

Installation gear for most cars

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Rockford Fosgate Prime R165-S

Whether you're building your first system or replacing some burned-out factory speakers, Rockford Fosgate's Prime speakers offer clean, powerful performance that'll keep you and your friends rockin' as you drive. Plus, Prime speakers are a great way to get Rockford Fosgate sound quality without destroying your bank account.

Rockford Fosgate woofer

The woofers are built tough so they can play at high volume.

Excellent factory replacement

Whether you're building your first system or replacing some burned-out factory speakers, Rockford Fosgate's Prime speakers offer clean, powerful performance that'll keep you and your friends rockin' as you drive. Plus, Prime speakers are a great way to get Rockford Fosgate sound quality without destroying your bank account.

Better components give you better detail

The Prime R165-S 6-1/2" component speaker system sports stiff mica-injected 6-1/2" polypropylene woofers that deliver strong drums and bass, along with clean reproduction of the midrange frequencies. The separate Mylar tweeters add the excitement of strong high-frequency response to your music without a trace of harshness. Built-in crossover networks divide the frequencies going to each driver, so all your music plays faithfully. Grilles are included.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

With supplied bracket great fit in my 07 tundra. Sound is incredibly clean and huge improvement over stock. Inspired me to install a whole new system with exception of head unit.

John, Pa

What's in the Box:

  • 2 Woofers
  • 2 Tweeters (each with attached 70" speaker wire terminated by quick-slide connectors)
  • 2 Woofer grilles
  • 2 Flush mounting tweeter housings (with tweeters installed)
  • 2 Angled surface mounting tweeter housings
  • 2 Flush-mount retaining clips
  • Two 12' lengths of speaker wire (with tinned bare wire on one end and quick-slide connectors on other)
  • Eight 1-1/4" Self-tapping screws
  • Four 5/8" Flat-head screws
  • 8 Speed-clips
  • Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
  • 6-1/2" mica-injected polypropylene woofer cone with foam surround
  • 1/2" Mylar balanced dome tweeter
  • power range: 2-40 watts RMS (80 watts peak power)
  • frequency response: 60-20,000 Hz
  • sensitivity: 92 dB
  • top-mount depth: 2"
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
Reviews

Rockford Fosgate Prime R165-S Reviews

Average Customer Review(s):

(140 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 1/2
Design 2-way
Tweeter Design 1/2" Balanced Dome
Tweeter Composition Mylar
Woofer Composition Mica Injected Poly
Woofer Surround Foam
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 89
Sensitivity at 2.83 volts 92
Frequency Response 60 - 20k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 40
Peak Power Handling (Watts) 80
Impedance (Ohms) 4
Top-mount Depth (Inches) 2
Bottom-mount Depth (Inches) 2 1/8
Cutout Diameter or Length (inches) 4 7/8

Product Research

Features

Mica Injected Polypropylene Woofers: The woofer cones are mica injected polypropylene. This material is light weight and rigid for decreased distortion and improved bass response.

Tweeter: The 1/2" Mylar tweeters are a balanced dome design. A semi-dome tweeter has a dome placed inside a cone. Balanced dome tweeters are semi-dome tweeters with equal reproduction area given the cone and dome portions of the tweeter. Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.

Tweeter Dimensions:

  Frame Diameter Frame Width Frame Depth Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.125" N/A N/A 1.83" 0.34" 0.752"
Surface Mount 1.815" N/A N/A N/A 1.1" 0.66" (Screw Depth)
Angled Surface Mount N/A 1.815" 1.845" N/A 1.661" 0.59" (Screw Depth)

Crossovers: A 6 dB/octave high-pass crossover is integrated into the case of each tweeter. The woofers have two spades on each terminal; the wire from the tweeter, as well as the wire from the source are connected there.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

They're usually quality at a good price [ Juan E.  Jun 20, 2017 ]
These speakers sounded great in my last application, and I am confident they will meet or exceed my current needs. [ Jonathan  Jun 02, 2017 ]
Good brand [ Dallas  May 17, 2017 ]
Good reviews along with great price point [ Daniel  May 17, 2017 ]
Great price!! [ Luis  May 16, 2017 ]
I chose this to replace my factory speakers. [ Brent  Apr 13, 2017 ]
Great sound from a reliable brand [ CRAIG  Apr 07, 2017 ]
Recommended by Crutchfield adivser. Didn't want to spend too much on my 2004 Honda Accord LX but wanted an upgrade from factory speakers. [ ANDY  Apr 05, 2017 ]
Bought it for a friend [ Graig  Mar 18, 2017 ]
I've been a Rockford speaker fan all my life! these new door speakers will match my dual 12" Rockford Subwoofers! [ Robert  Mar 03, 2017 ]
Fosgate always has clean sounding speakers that sound good with a stock deck. [ jason  Feb 27, 2017 ]
My old speakers were coming apart and I wanted a good set of speakers that would provide quality sound [ John  Feb 16, 2017 ]
These speakers are truly badass [ Trace  Jan 27, 2017 ]
REVIEWS SEEMED GOOD AND NEEDED SEPARATE WOOFER/TWEETER COMBO FOR FRONT DOOR INSTALL [ STEVE  Jan 24, 2017 ]
Good reviews can usually never go wrong with Rockford fosgate [ JOSHUA W  Jan 12, 2017 ]
The reviews were mostly good and they are a good brand I trust. [ JOSE  Dec 29, 2016 ]
Chad recommended these speakers as the best solution for the rear door panels of my truck. [ Jim  Dec 10, 2016 ]
Rockford Fosgate has been my go to for over 20 years. Never disappointed in their sound. I wish they still made head units [ Papa J  Dec 10, 2016 ]
I wanted to to get better sound quality out of my chevy colorado. My truck did not come with tweeters. My buddies colorado came with tweeters and the sound difference was night and day. [ Lafayette  Nov 30, 2016 ]
Husbands gift [ Shelly  Nov 27, 2016 ]
The set has good specs. This set has the highest sensitivity, 92 dB, in my budget range. The low end is only 60 Hz but I will add a sub-woofer some day. Rockford has a good rep and, lastly, they will not stand out visually and tempt someone to break in the car.. [ Gary  Nov 10, 2016 ]
Upgrading factory speakers. These were recommended by Crutchfield advisor. [ Christopher K.  Sep 22, 2016 ]
Dolly reccomended Dolly's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=131 [ David  Jul 24, 2016 ]
good speakers for the price [ Cory  Jul 08, 2016 ]
They got excellent reviews. Before I buy any product, I always check to make sure there isn't a common problem lots of customers seemed to have based off of the reviews. These speakers didn't so I decided to purchase them. [ Michael  Jun 30, 2016 ]
I've heard a lot of good things about Rockford fosgate so I'm gonna give them a try [ John  Jun 06, 2016 ]
Good performance paired to an aftermarket headunit (not run from a dedicated amp) at a low price point. [ erik  May 15, 2016 ]
Brand [ Walter  Apr 23, 2016 ]
These speakers are sleek and amazing clear sound with enough boom for rockin' out. [ Hector Luis  Apr 21, 2016 ]
Wow great quality and clear sound. [ jorey  Apr 16, 2016 ]
Recommended by Crutchfield tech support for best match in my non-JBL 2002 Highlander front speaker replacement. [ Alex  Apr 15, 2016 ]
Price, and love this item.. [ juan  Apr 09, 2016 ]
Good quality, well priced speakers. Sound great when installed [ Kyle  Apr 07, 2016 ]
Recommended by Ringo and smaller ones were out of stock. Only $20 more for larger ones Ringo's: http://www.crutchfield.com/Support/Bio.aspx?bio=164 [ G  Mar 31, 2016 ]
I chose these speakers because of the high sensitivity rating ... 92 dbs is great! I have used Rockford products in the past and I have always been satisfied. [ Trenton  Mar 21, 2016 ]
Like the look of these and they are thin enough to mount where I want them in my car. [ John  Mar 16, 2016 ]
Name [ Jack  Mar 14, 2016 ]
Good value [ Broderick  Mar 11, 2016 ]
Name, price, [ Ram A.  Mar 11, 2016 ]
For my wife's Infiniti [ Scott  Mar 09, 2016 ]
Good reviews. Like the idea of separate woofer and tweeter. [ Thomas  Mar 08, 2016 ]
My friend bumps them in his car and I really like how they sound [ Justin  Feb 24, 2016 ]
Like Rockford Fosgate and the Throw in Tweeters are a nice combo [ Jason  Feb 18, 2016 ]
these will do nicely in the back doors of my rogue, and I'll put the tweeters in the dash to replace those strange little speakers that sound terrible [ Charleesa  Feb 15, 2016 ]
Rockford has real solid dependable everything. . . I`m always using Rockford Fosgate in all my installations [ Scott  Jan 29, 2016 ]
I felt like for the price and what you where offering it was a good deal and with in my budget [ Heath  Jan 24, 2016 ]
For the price a quality of this combo, is simply the right choice if you are on budget. [ Juan  Jan 12, 2016 ]
Clean sound, easy installation, great reputation. [ Chad  Jan 12, 2016 ]
Top seller and great reviews [ Kenneth  Jan 09, 2016 ]
to replace the bad factory ones [ justin  Jan 05, 2016 ]
A component system gives you more flexibility to tailor the sound of your environment to your specific tastes. Mounting the mid-bass in a factory door or shelf position and the tweeters up higher on the a-pillar or dash will enable you to create a more immersive and expansive sound-stage. [ James  Dec 28, 2015 ]
Price was best [ Mark  Dec 15, 2015 ]
Recommended by friend that purchased same. [ Jim E.  Dec 14, 2015 ]
Trusted Brand. [ Jonathan  Dec 10, 2015 ]

18 questions already asked

You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy  Jun 04, 2017 ]  Staff
Technically I think so, but that's all your high end / vocals. So you will just have a lot of mid-tones and bass if you leave them out. You should look at getting a 2 or 3 way speaker that fits your rear door. There should be lots. [ Scott  Apr 26, 2017 ]
Sure, but it would be a crime to do so! Plan it out just a bit more, I've never heard of someone regretting extra work for tweeters! [ David  Apr 07, 2017 ]
Jeremiah, I installed my set in a 2002 GMC Seirra Pickup in the front doors. My original setup included separate tweeters, so it wasn't necessary to leave them out. But, I don't see why you couldn't lead them out. You will lose some high end response however. [ David  Apr 07, 2017 ]
Better sound with them. I didn't have a factory spot either, so made one to fit. If you can't find a spot, go without the tweeter [ Jay  Apr 07, 2017 ]
Yes you can. But will only have mid level sound. [ DUSTIN  Apr 07, 2017 ]
Jeremiah, I installed the speakers in 1967 F100 and used the retro housings for them, because there was just one speaker in dash. The speakers sound great so I would say use the tweeters. my opinion Tim [ Tim  Apr 06, 2017 ]
Well I left mine off and kept he factory ones. They say I should have replaced them but I didn't. It does sound a little better but I did the rear speakers also. Even with all the door speakers replaced, there was not a huge improvement so do not expect it. The factory radio, if that is what you have is detuned and it sucks. If you you want better quality plan on replacing the head unit. There is another company called Taco Tunes that makes a tuner and amp that plugs into the factory head unit if that is what you want. I want to give it a try but just haven't had the time to deal with it. [ RICHARD  Apr 05, 2017 ]
I was not happy with the range on these speakers. I do not think they have the capabilities you are looking for. I would suggest going higher end. [ Michael J.  Apr 01, 2017 ]
You can connect them directly, but you take a chance on mismatched power levels and mismatched crossover slopes, as well as the chance that the factory stereo has pre-equalized the sound to the tweeters. It'll work but your'e better off hooking up these speakers as intended. [ Gregory  Mar 20, 2017 ]
I know the stock wiring will work fine, but I don't know about the "connectors". [ Dale  Mar 20, 2017 ]
No there is no crossover supplied. The Prime series is primarily for factory replacement and no other upgrades. They sound good at low wattage, but if you're adding an amplifier I would go with something in The Punch or Power series. Both of which come with a passive crossover. [ Zachary  Dec 09, 2016 ]
They are built in [ Gaspar  Dec 09, 2016 ]
There is no external crossover. Aso far as I know, nothing is built into these speakers either. I had them in my Jeep, running off a Kenwood deck, and it was adequate at best. If you use an amp they'll probably be good. Jeeps have terrible acoustics anyway [ Papa J  Dec 09, 2016 ]
The crossovers are built in. [ Jeffrey  Dec 09, 2016 ]
It is only a capacitor for the tweeter. Not a separate crossover. [ Chad  Dec 09, 2016 ]
The factory door woofers and tweeters are wired in parallel so, if you plan to power the speakers with the stock wattage, you'll need to connect the factory tweeter's input & output leads together in order for the woofer to still get the power & signal. As a result, you will want to use the crossovers provided with the components and run new wire from it's outputs to the separate midbass and tweeters. I hope that helps. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Oct 19, 2016 ]  Staff
Thanks for your question. This is for one pair that includes the woofer and tweeter. It would only cover two doors. Hope that helps. [ Kenny  Sep 21, 2016 ]  Staff
I am not 100% sure on this setup, but seems like it should work without any issues. Best of luck!!! [ Randall  Sep 12, 2016 ]
A component system has a separate tweeter and woofer, so you get 4 independant speekers. Where a 3-way has the the tweeter, crossover and woofer built into one unit, so only two assembled speakers will come in the box. [ Zachary  Dec 09, 2016 ]
Alright Tara, not sure about the install, usually the Crutchfield site will tell you what you need for install in your car when you select it. As for the difference between 3-way and component; the major difference is assembly. A component speaker set has and mid range woofer and separate high pass filter, and the high range tweeter. If your powering the speakers with a separate amplifier I 100% recommend the component setup. If you just want beetle than stock speakers I would stick with a normal 3way. Install will be easier with the 3way. [ TANNER G  Aug 05, 2016 ]
As long as your speaker door holes are for the size of speaker you should be fine. Might need to get wire connectors from wires in door and cut the custom fitting on your speakers came with your 300C. Component system and 3 way...3 way has highs, mids and subwoofer...so basically your treble, mid-range and bass all in one speaker...component has speakers in the door and then your tweeters as well...I would prefer the 3 way speaker for best sound....hope this helped somewhat, have a good day!!! [ Randall  Aug 05, 2016 ]
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy  May 09, 2016 ]  Staff
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy  Mar 29, 2016 ]  Staff
This includes 2 Woofers 2 Tweeters, you can see everything that comes in the box on the product page under the details tab. Hope that helps. [ Kenny  Feb 27, 2016 ]  Staff
Thanks for your question. These have a power range: 2-40 watts RMS (80 watts peak power). You'll find this on the main product page overview. [ Kenny  Feb 15, 2016 ]  Staff
No! Foam will never be as durable as Rubber. Now with that said, will the foam outlast the speakers life, or the usefulness of the speaker...probably. If you plan on keeping your car forever, live in very dry hot environments and listen to EDM I'd say go for the rubber. If you listen to talk radio, don't plan on keeping your car for more than 5 years and live next to the beach, foam will be fine. As for sound, that is subjective. Some people have seen UFO's too. [ Matthew  May 28, 2016 ]
Yes I think they are just as durable. I also think the sound better. Hope this helps you out. I have had mine for about two years and I love them. I would choose anything beside Rockford. Good luck [ Clayton  Nov 23, 2015 ]
Not required but can be helpful. Have these in the rear of my Tundra and they sound great mated to an aftermarket head unit. Granted its getting 30 RMS. I would say you'd be fine as long as the head unit is supplying >20 watts RMS. YMMV and hope that helps. [ GREGORY  May 29, 2015 ]
Depends on your head unit. You need to make sure the speakers impedance matches. Also how many watts your stereo has to push them. I didn't need an amplifier and mine sound awesome [ TODD L  May 29, 2015 ]
No, just replace old speakers with these. [ DREW  May 29, 2015 ]
You don't have to but they will sound better if you do [ JONATHAN  May 29, 2015 ]
I have a 1998 dodge dakota I've used these on two jvc units and a kenwood unit they awesome! I am extremely picky about my sound as well and I've had the for about a year now still sound good! [ GUNNER  Sep 15, 2014 ]
My speakers rock [ CHARLES D  Sep 14, 2014 ]
Yes they will. I have an alpine CD receiver and they sounded great!! Especially with an alpine radio because they have a lot of tuning options. [ JONATHAN  Sep 14, 2014 ]
They are good highs. Also get 6x9s for some thump. Country sounds good. Rap not so much [ KARL A  Sep 14, 2014 ]
Hello, I do recommend getting an amp as I installed these without an amp and sure they sound good but you're not using them to their full potential. Also since you have an aftermarket deck they will sound even better with the aftermarket amp. But if you're not going to buy an amp might as well keep the stock speakers since most factory amps only push less then 20 watts also not only will it benefit the speakers it will also benefit the deck. [ SIDDHARTH  Sep 14, 2014 ]
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. [ Krissy  Jun 10, 2014 ]  Staff
Articles