Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Rockford Fosgate Prime R250X1
Mono subwoofer amplifier 250 watts RMS x 1 at 2 ohms
Item # 575R250X1 | MFR # R250X1
$139.99 Earn up to 140 Rewards points
Offers & Financing
Our take on the Rockford Fosgate Prime R250X1 by Crutchfield's Buck Pomerantz
Rockford Fosgate power for your sub
Rockford Fosgate performance in a small package. The Prime Series R250X1 mono amp can drive a sub with up to 250 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.
Rugged performance and value
The R250X1's heavy cast-aluminum chassis efficiently draws damaging heat away from its internal components, ensuring reliable, long-term play. The amp's built-in sensors keep track of the output current and power supply temperature, ensuring that plunging subwoofer impedances (they change constantly during play) or even a short circuit won't hurt anything. The included wired remote lets you control the amp's volume level from the front seat. Your driver's seat will become your favorite place for listening once this Prime amp goes to work.
Putting together a bass system with this amp? Check out this Crutchfield-approved amp/sub package.
Great amp for the price. Just what I needed to run two 6 inch factory BMW subs.
Brian, Decatur, AL
What's in the Box:
- Mono subwoofer amplifier
- Remote Punch Level Control module
- 18' Remote Punch Level Control cable (RJ-25 connector on both ends)
- 6" Speaker level input harness
- 3mm Allen wrench
- Four 3/4" Self-tapping screws
- Two 1/2" Self-tapping screws
- 4 Flat washers
- Installation & Operation manual (English/ French/ Spanish/ German/ Italian)
- Amplifier verification certificate
- mono subwoofer amplifier
- 150 watts RMS x 1 at 4 ohms (250 watts RMS x 1 at 2 ohms)
- CEA-2006 compliant
- variable low-pass filter (50-250 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- phase switch
- wired remote Punch Level Control included
- Class AB amplifier design
- frequency response: 20-250 Hz
- MOSFET power supply
- preamp and speaker-level inputs
- preamp outputs
- 8-gauge power and ground leads and a 30-amp fuse recommended wiring and hardware not included with amplifier
- no on-board fuses when installing multiple amps in a system, an additional 30-amp in-line fuse between the distribution block and this amplifier is recommended
- 11-1/4"W x 2"H x 7-3/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
Rockford Fosgate Prime R250X1 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|RMS Power Output (Watts x Channels)||
150 x 1
|Peak Power Output (Watts x Channels)||N/A|
|Power at 2 Ohms (Watts x Channels)||250 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||20-250 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||80 dB|
|Low-Pass Crossover Frequency||50-250 Hz|
|Low-Pass Slope (dB/octave)||12 dB/octave|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0-12 dB|
|Bass Boost Frequency||45 Hz|
|Speaker Level Inputs||Harness|
|Preamp Outputs||1 pair|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
CEA 2006 Compliant: The R250X1's power ratings and signal to noise ratio are measured according to the uniform standards advocated by the Consumer Electronics Association (CEA). This allows you to accurately compare these specifications for all CEA 2006-compliant amplifiers, even from different brands. Manufacturers who adhere to these standards can display the CEA 2006 logo on their products and packaging. CEA2006 Specifications for this amplifier are:
- 4 Ohms: 150 watts RMS x 1 at 4 ohms, 14.4 volts, and less than 1% THD+N
- 2 Ohms: 250 watts RMS x 1 at 2 ohms, 14.4 volts, and less than 1% THD+N
- S/N: 80 dB, measured at 1 watt output (100 dB measured at rated power)
LED Indicator: The amplifier is equipped with an LED power/protect indicator. The LED illuminates blue when the unit is turned on. It illuminates red if the thermal or short circuit protection circuit is engaged, and the amplifier will automatically turn off.
Mounting: The amplifier can be mounted vertically or horizontally using the supplied mounting screws. The amplifier should never be mounted in an engine compartment as this will void the warranty.
Gain Control: Use the amplifier's gain control to match the output of the source unit. The rotary gain control is labeled 1 to 11 and has a sensitivity range of 150mV to 4V when using a preamp level signal, 450mV to 12V when using a speaker level signal.
Remote Punch Level Control: The R250X1 includes a wired Remote Punch Level Control, linked to the gain control of the amplifier. The module allows you to remotely control the output level of the amplifier from the dash or center console. The Remote Punch Level Control features a rotary dial, and comes with mounting hardware and an 18' cable.
Note: The Remote Punch Level Control measures approximately 1-3/4" wide (2-5/8" including the mounting flange) x 3/4" high x 1-5/8" deep (2-1/8" deep including the knob and wiring).
Crossover: The amplifier is equipped with a 12dB/octave Butterworth low-pass crossover. The crossover point is continuously variable from 50 to 250 Hz. This being a subwoofer amp, the crossover is always engaged.
Phase: The 2-position phase switch allows you to easily reverse the output phase of the amplifier, choose 0° or 180° to match the rest of your vehicle's speaker system.
Punch EQ: The Punch EQ bass boost circuit is adjustable from 0 (min) to +12dB (max) and centered at 45Hz.
Power Terminals: The power and ground terminals are nickel-plated set screw terminals and will accommodate up to 4 gauge power and ground wires.
Fuse: An external 30-amp fuse (not included) must be installed on the power wire at the battery. If a wiring kit is used which includes a fuse with a value other than 30-amps, the original should be replaced with a 30-amp fuse.
Remote Turn-On Terminal: The remote turn-on terminal is a nickel-plated set screw terminal that will accommodate up to an 8 AWG wire. It's used to remotely turn the amplifier on and off.
Speaker Terminals: The one pair of speaker outputs is nickel-plated set screw terminals what will accommodate up to 8 AWG speaker wire.
RCA Input Jacks: The industry standard RCA jacks provide an easy connection for preamp level input. They are nickel-plated to resist signal degradation caused by corrosion.
Speaker Level Input: A speaker level input harness is included, making it easier to add the amplifier to a factory radio or to a receiver with no preamp outputs.
RCA Output Jacks: A pair of RCA pass-thru jacks provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of your vehicle to the amplifier location.
Wired Remote: An RJ-25 jack is used with the included Remote Punch Level Control.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Name brand repartition and price. [ Daniel Apr 27, 2017 ]
Heard it was good amp [ Antonio Mar 08, 2017 ]
Best choice for the speaker / enclosure that I ordered [ Jeffrey Feb 04, 2017 ]
Recommended for my car [ D Jan 02, 2017 ]
Paired with Sub nicely and I like the configuration options. [ Adam Dec 13, 2016 ]
Features meet needs [ Brett Dec 11, 2016 ]
Wanted an amp with a volume control remote since I can't listen to all different types of music with one volume setting. [ Nicholas Oct 08, 2016 ]
Replacing a failing RF punch 301M [ JASON M Sep 15, 2016 ]
Good match for the sub I purchased. [ Willie Jul 16, 2016 ]
Fits my specific need. [ Albino Jun 28, 2016 ]
Because it's Rockford [ Eric C. Jun 04, 2016 ]
Good price for an amp from an established brand. [ Miguel May 19, 2016 ]
Awesome power for dollar amount! [ Tim May 08, 2016 ]
it was recomended [ Charles Mar 31, 2016 ]
Seems to be a good choice for the Rockford Fosgate R2S-1X10. We currently have 4 other Fosgate amps in different vehicles that have performed well. [ GARY Mar 26, 2016 ]
Small size, plenty of power. [ Curtis Jan 29, 2016 ]
7 questions already asked
this amp only turns on with +12v supplied to the remote power terminal. [ MARK E Apr 11, 2017 ]
No it needs a remote power input to turn on. [ Jeremy Apr 10, 2017 ]
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy Jan 27, 2017 ] Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Kenny Oct 12, 2016 ] Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy May 05, 2015 ] Staff
A 2-ohm punch 12 would be a great match: http://www.crutchfield.com/p_575P1S212/Rockford-Fosgate-Punch-P1S2-12.html [ Jeff Dec 15, 2014 ] Staff
4 gauge is also necessary unless, you want to blow fuses in the line or heat up the wire. [ John Dec 03, 2014 ]
Yes. I used Sky High 4 gauge OFC and it fit perfectly. [ John Dec 03, 2014 ]
Yes. I believe larger than 8 guage wiring is required. $ guage would be overkill, but fine technically. You may have trouble fitting it into the ports but they probably have ends that can be crimped on. I am pleased with the output though. Good amp, especially for the price. [ STEVEN Dec 03, 2014 ]
I wouldn't recommend it it will heat up if you like volume. [ JARED Dec 03, 2014 ]
I forwarded your question to an Advisor and they responded with the following: It would not be recommended to use a 10 gauge. The amp calls for an 8 gauge as the minimum size. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Aug 06, 2014 ] Staff