Skip Navigation

Rockford Fosgate RFK4D

4-gauge dual amplifier complete wiring kit

42 Reviews | 2 questions - 7 answers


Our take on the Rockford Fosgate RFK4D

Your amp needs big power wires in order to deliver top performance to your sound system. Rockford Fosgate's RFK4D amplifier wiring kit supplies everything you'll need to send power and signal to two amps and your speakers. It's designed for amplifiers with fuse ratings totaling up to 100 amperes.

This kit includes patch cables and speaker wire for installing two 2-channel or mono amps — you'll need to add cables and speaker wire if you're installing a multi-channel amp along with a second amp.

Your amp needs big power wires in order to deliver top performance to your sound system. Rockford Fosgate's RFK4D amplifier wiring kit supplies everything you'll need to send power and signal to two amps and your speakers. It's designed for amplifiers with fuse ratings totaling up to 100 amperes.

The kit includes two distribution blocks, 4-gauge power and ground cables, 8-gauge power and ground cables, speaker wire, two patch cables, a fuse holder, a 100-amp fuse, and more. Rockford Fosgate makes these cables from 100% pure crystal-oxygen free copper wire so you can count on maximum signal transfer.

The wires were long enough, had everything to set up nearly everything. If you are getting 2 amps at the same time and know you need 3 RCA lines, make sure to pick one up separately. Everything in the kit was good quality wire, thick and pliable.

Barry, Chico, CA

What's in the Box:

  • 17' Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
  • 3' Ground cable (4-gauge) in a gray translucent jacket (with a ring terminal on one end)
  • 6' Power cable (8-gauge) in a red translucent jacket
  • 6' Ground cable (8-gauge) in a gray translucent jacket
  • 2 Distribution blocks (One 4-gauge in/Three 8-gauge out)
  • Two 16' twisted pair RCA patch cords
  • 30' Length of 16-AWG speaker wire
  • 20' Length of turn-on lead in a blue jacket
  • Ten 4" wire ties
  • Plastic bag containing the following:
  • Crimp-on ring terminal for 4-gauge wire
  • Large black rubber boot
  • 100A MAXI fuse
  • Plastic 4 gauge-sized grommet
  • 2 Red plastic butt connectors
  • 5 Crimp-on female 0.25" quick slide connectors
  • 5 Crimp-on spade connectors
  • 3 Red rubber boots
  • 2 Black rubber boots
  • Decal with model and serial numbers

Product Highlights:

  • dual amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable
  • 6 feet of 8-gauge power cable
  • 3 feet of 4-gauge ground cable
  • 6 feet of 8-gauge ground cable
  • 20 feet of 18-gauge turn-on lead wire
  • two 16-foot twisted pair RCA patch cables
  • 30 feet of 16-gauge speaker wire
  • MAXI fuse holder and 100-amp fuse
  • two 4-gauge to 8-gauge distribution blocks
  • assortment of wire termination hardware and cable ties
  • warranty: 1 year
  • Our 60-day money-back guarantee

Rockford Fosgate RFK4D Reviews

Average Customer Review(s):

(42 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)


By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos

<< >>

Hands-on research

Product Research


General Overview: This is a dual amplifier wiring kit that includes 4-gauge and 8-gauge power and ground cables, power distribution blocks, turn-on leads, two pairs of stereo RCA cables, a 30' length of 16-AWG speaker wire and other accessories required to install two amplifiers.

High Strand Power/Ground Cable: The power and ground cable are 100% Pure Crystal-Oxygen Free Copper (PC-OFC) and meet or exceed AWG (American Wire Gauge) requirements. For example, the included 4-gauge power and ground wires each have 1,862 copper strands, compared to the 735 copper strands which meets the standard.

In-line Fuse Holder: The included in-line fuse holder attached to the power cable comes with a 100-amp MAXI-type fuse.

Power Distribution: The kit includes two unfused power distribution blocks. Each block has a single input and three outputs. There are insert sleeves that allow you to use multiple sizes of wire: a 1/0 gauge-to-4 gauge sleeve for the input, and three 4 gauge-to-8 gauge sleeves for the output.

Patch Cables: There are two 16' RCA patch cables included, each with twisted pair design for noise rejection, and a split center pin that helps secure the connections at both ends.

Speaker Wire: The amplifier kit comes supplied with high strand 16-AWG speaker wire for increased sound transfer.

Accessories: The kit includes the following accessories needed for amplifier installation:

  • Ring terminal for 4-gauge wire and rubber boot
  • Spade terminals for 16-gauge speaker wires with red and black rubber boots
  • Female quick slides for 16-gauge speaker wires
  • Butt connectors for splicing together wires
  • Grommet for routing 4-gauge power wire through the firewall
  • Wire ties for securing wires to the vehicle

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Added year warranty to amps [ Donna  May 31, 2017 ]
Almost Complete [ P  Apr 20, 2017 ]
Required to install the amps in the Taco. [ THEODORE  Mar 18, 2017 ]
Quality of brand [ josh  Mar 01, 2017 ]
Very good all in one amp wiring kit to power up my system. Was looking for good quality for a good price. [ Joseph L.  Jan 21, 2017 ]
To Install 2 amp, 1 four channel and 1 mono for a woofer. [ Juan C.  Jan 16, 2017 ]
All in one kit for multiple amps [ Michael  Oct 01, 2016 ]
Good brand [ Charles  Sep 24, 2016 ]
It has everything that i need to hook up the two amps i just bought from you guys. [ trinidad  Sep 11, 2016 ]
Used this before, great product. [ Lyvierre  Sep 05, 2016 ]
Friend [ Jonathan  Jun 20, 2016 ]
Great product and great quality. Included everything I needed for a 5-channel amp setup. [ jorey  Apr 16, 2016 ]
Pure oxygen free copper..I'm adding a third amp as well, so the distribution blocks will work out perfectly. This kit also includes two more feet of 8 awg than the Kicker kit, which I will need. I like the fuse block better on the Kicker kit however. [ travis  Mar 15, 2016 ]
Quality wires are needed for quality install in regards to power and signal [ Matt  Mar 11, 2016 ]
Installing system and need solid wiring foundation. Looks like complete kit and Rockford Fosgate is high quality. [ Patrick  Jan 10, 2016 ]
To hook up two amplifiers [ Sergio  Dec 21, 2015 ]

2 questions already asked

Each amp has it's own fuse, to protect the amps. The fuse on the main power line which is connected to the battery, protects the vehicle. [ Matthew  Nov 29, 2016 ]
You can run two fuses! [ Lee  Nov 29, 2016 ]
The main fuse is supposed to be near the battery. The power splitter for the two amps may be in the car trunk. If your amps don't have their own fuses and you want them, you may be able to install some. It's a nice kit, and Crutchfield tech support will help you with the install. [ Marlin  Nov 29, 2016 ]
Kit will work for that. double check the required cable lengths [ JASON  Feb 20, 2014 ]
Absolutely. Crutchfield has thought of everything you may want to use in hooking up whatever system you choose, in any configuration. They have yet to miss anticipating the remotest need I may have in numerous setups over the years, and for a number of different vehicles. [ DOUG  Feb 20, 2014 ]
You need additional patch cord to run 4 channel amp [ CHRIS  Feb 19, 2014 ]
Yes it does. I used it for a 4 channel amp and a mono amp for a sub. It's a great kit, but I had to buy an extra roll of speaker wire to run since I was running a 4 channel amp. That would be my only complaint, because otherwise it's a great kit. You may not have to depending on your car make and the distance between the speakers and the amps. [ KEVIN  Feb 19, 2014 ]

Searches related to the Rockford Fosgate RFK4D 4-gauge dual amplifier complete wiring kit