Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Rockford Fosgate T2D415
Power T2 Series 15" subwoofer with dual 4-ohm voice coils
Rockford Fosgate T2D415 - Speaker leads are stitched to the spider improving the reliability and performance
Item # 575T2D415 | MFR # T2D415
This item is no longer available.
Our take on the Rockford Fosgate T2D415 by Crutchfield's Dave Delamere
Rockford Fosgate's herculean sub
Power T2 subwoofers combine durable materials with built-like-a-tank engineering so you can rock steady over the long haul. These potent subs are designed for use with Power Series amps, handling huge amounts of power to give you performance that's as good as it gets.
The T2D415's anodized aluminum cone and high-excursion surround combine to push big air for big bass.
Colossal magnet, epic performance
The T2D415 15" subwoofer uses an anodized aluminum cone with a high-excursion rubber surround for accurate, powerful bass. The huge 304-ounce magnet structure teams up with 4" voice coils for power handling up to 1,200 watts RMS or 2,400 watts peak. Whether you're a competitor or just a fan of great bass, you'll appreciate the extensive venting in the cast aluminum frame that keeps the woofer cool even during heavy use.
This Power Series subwoofer works in a sealed or ported enclosure. The dual 4-ohm voice coils allow you to wire your system to draw maximum power from your mono amp or to hook up multiple subs safely.
To drive this single subwoofer, we recommend a mono amplifier rated between 900 and 1800 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
What's in the Box:
- One 15" woofer
- 1 Metal trim ring
- Twelve 1-5/8" Allen head wood screws
- 4mm Allen bit
- Installation and Operation manual
- 15" subwoofer with dual 4-ohm voice coils
- anodized aluminum woofer cone with rubber surround
- cast aluminum basket
- power range: 500-1,200 watts RMS (600 watts per coil)
- peak power handling: 2,400 watts
- frequency response: 20-250 Hz
- sensitivity: 85.4 dB
- top mount depth: 10"
- sealed box volume: 2.0 cubic feet
- ported box volume: 2.75 cubic feet
- warranty: 1 year
- Our 60-day money-back guarantee
Features and Specs
|Impedance||2 ohms or 8 ohms|
|Cone Material||Anodized Aluminum|
|Ideal Sealed Box Volume (cubic feet)||2|
|Ideal Ported Box Volume (cubic feet)||2.75|
|Port diameter (inches)||6|
|Port length (inches)||17|
|Dual Voice Coil||Yes|
85.4 dB at 1 watt
|Frequency Response||20 - 250 Hz|
|RMS Power Range (Watts)||500-1200|
|Peak Power Handling (Watts)||2400|
|Top Mount Depth (inches)||10|
|Bottom Mount Depth (inches)||10 7/16|
|Cutout Diameter or Length (inches)||13 13/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual 4-ohm Voice Coils: The woofer features dual 4-ohm voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2-ohm load; when the voice coils are wired in series, the woofer presents an 8-ohm load.
Woofer: The anodized aluminum woofer cone is lightweight and extremely strong, giving the woofer very high power handling, low distortion, and superior bass response. The dustcap is also anodized aluminum.
Parabolic Triangular Cone Geometry: By bonding an aluminum parabolic dust cap of equivalent size to the cone body, a balanced triangular structure is created. This system reduces piston flex and eliminates cone distortion.
IDHS: An Inductive Damping Heat Sink (IDHS) secures directly to the top of the magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). The IDHS also radiates heat to reduce voice coil temperature.
Stitched Tinsel Leads: The multipoint periodic technique of stitching the tinsel lead wires reduces the effective mass of each tinsel lead and spreads the stress and strain over a greater area, improving the reliability and performance of the subwoofer. These stitched tinsel leads withstand extreme duty cycles, fatigue, and high current that is critical to a robust design.
Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
Cast Aluminum Basket: The two-piece die-cast aluminum "basket in a bucket" design adds rigidity and eliminates multiple acoustic resonances. Additionally, the large aluminum mass helps reduce voice coil former temperature and increase power handling.
Triple Stacked Magnet Motor Assembly: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.
Terminals: The custom isolated compression terminals are spring loaded and will accept pin connectors and bare wire up to 8-gauge.
Concealing Ring: The metal concealing ring can be installed to hide the mounting screws, giving the subwoofer a finished look.
Vented Enclosure: RockfordFosgate recommends mounting the woofer in a vented enclosure with an ideal internal volume of 2.75 ft³. One 6" diameter x 17" long port is recommended, resulting in a tuning frequency of 36 Hz.
Sealed Enclosure: If a sealed enclosure is used, RockfordFosgate recommends 2.0 ft³.
High Output Enclosure: Dimensions are also given for a high output slot loaded enclosure; 3.25 ft³ with a 3" x 16.5" x 22.5" slot port, resulting in a tuning frequency of 38 Hz.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.