Stereo Power Amplifier: The Onkyo M-5000R Stereo Power Amplifier is
rated at 80 watts (into 8-ohms, at 20-20k, with 0.05%, driving 2 channels) or
150 watts (into 4-ohms, at 20-20k, with 0.05%, driving 2 channels).
Quad Push-Pull Amplification Design (w/ 3-Stage Inverted Darlington
Circuitry): The Onkyo M-5000R power amplifier employs an efficient quad
push-pull amplification design. Quad push-pull amplification uses two extra
transistors on each channel to separately amplify the positive & negative halves
of the waveform. Meanwhile, 3-Stage Inverted Darlington Circuitry helps reduce
distortion at the output stage. Together with the push-pull amplifier design,
the 3-stage inverted Darlington Circuitry shapes a clean, consistent signal to
send to the outputs for ultra-low distortion & greater sound quality.
AWRAT (Advanced Wide Range Amp Technology): Onkyo's advanced
AWRAT design for power amplification comprises the following technologies to
ensure optimal audio performance..
- DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry):Since the advent of digital audio, signal-to-noise ratios have
improved dramatically. However, the S/N ratio reflects static noise only,
and takes no account of another type of noise that occurs as the byproduct
of sound reproduction; dynamic noise. To reduce this type of noise, Onkyo
has developed DIDRC technology. Despite being beyond the normal range of
human hearing, frequencies above 100 kHz are susceptible to clock pulse and
other forms of distortion from digital devices. Such distortion in the
super-high-frequency range can generate "beat interference", which in turn
affects the character of the original sound. By improving linearity and
reducing distortion in the super-high frequency range, Onkyo's new DIDRC
technology effectively reduces perceptible noise and delivers clearer, truer
- Low NFB (Negative-Feedback Design): Too much NFB makes
a system susceptible to counter-electromotive force from the speakers,
resulting in a drop in perceived sound quality. To avoid this, Onkyo focuses
on improving the frequency response and reducing distortion, without relying
so much on NFB.
- Closed Ground-Loop Circuits: AWRAT amplifiers employ a
sophisticated closed-circuit design in which each circuit has a separate
link to the power supply. This helps to cancel individual circuit noise and
keep the ground potential free of distortion.
- HICC (High Instantaneous-Current Capability): HICC
enables an AWRAT amplifier to immediately cancel the speakers' reflex energy
and instantaneously send out the next signal. The same high current required
to achieve this also supports the amplifier's ability to handle speaker
- Symmetrical Twin-Monaural Construction: Power devices
for the left and right channels of an AWRAT amplifier is aligned
symmetrically. Each channel has the same electrical and structural design,
and signal pathways are uniform in length. This helps to minimize errors in
New Circuit Board Construction w/ Internal Struts to Reduce
Vibration: Rather than being directly connected to the chassis base,
the circuit boards inside the M-5000R are cushioned by internal struts and
affixed to the front, side, and rear panels. This method of construction
prevents vibrations from the chassis from adversely affecting the circuit boards
Separate Panel Construction: The M-5000R features separate aluminum
panels for the top, sides, and front to reduce unwanted vibrations caused by
internal resonance. Compared to a one-piece chassis design, this construction
method offers greater rigidity and improved noise reduction.
Two Massive Toroidal Transformers w/ Sub Transformer: The
M-5000R incorporates two massive toroidal transformers that reduce magnetic flux
leakage, improve efficiency, and keep the power supply stable. Also on-board are
a sub-transformer and four 27,000 microfarad capacitors that work to make the
current significantly smoother.
Power Meter: The front-panel power meters show the output power level
of each of the amplifier's two channels. The large power meters have been
designed so that the indicator needles move up to the peak level quickly and
then return more slowly. This make it easier to read transient power levels
which last for only a fraction of a second.
Balanced XLR Input for Monural Amplification (in BTL mode): The
M-5000R offers the audiophile possibilities of BTL (Bridge-Tied Load) through its pro-grade XLR
input. You can use the BTL feature in conjunction with a compatible pre-amp and
a second M-5000R power amp to double the power output for left and right channels.
Stereo RCA Inputs: The Onkyo M-5000R is fitted with a set of
gold-plated, machined brass stereo RCA inputs to connect to an external
preamplifier (such as the
Onkyo P-3000R, sold separately). You cannot connect the amp's stereo RCA inputs and balanced XLR
input as the same time (this may damage the amplifier).
Binding Post Speaker Terminals: The Onkyo M-5000R power amplifier
features four gold-plated binding-post speaker terminals to connect a pair of
loudspeakers. The binding-post speaker terminals will accept bar wire (up to
10AWG), pin-connectors, spade-lugs, and banana plugs (single only). The power
amplifier supports speakers from 4-ohm to 16-ohm.
12V Trigger Input/Output: The 12V trigger input/output jacks (3.5mm)
enable the amplifier to turn-on and go into standby mode based on the standby
status of the connected component, also featuring a 12V trigger jack.
Auto Standby: The power amplifier will automatically enter Standby
mode if the amp receives not signal for approximately 3 hours.