Network & Tuner Functions
High-Quality Sound: The Onkyo TX-8050 network stereo
receiver employs a host of technologies to ensure optimal audio
- WRAT (Wide Range Amplifier Technology): This
technology uses low-negative-feedback circuit topology for accurate
signal reproduction, improved dynamic signal-to-noise ratio, and
better delivery of power peaks.
- Low Negative Feed Back Design: Too much NFB
(negative feed back) makes a system susceptible to
counter-electromotive force from the speakers, resulting in a drop
in perceived sound quality. To avoid this, Onkyo focuses on
improving the frequency response and reducing distortion, without
relying so much on NFB.
- Closed Ground-Loop Circuits: The TX-8050
employs a sophisticated cloAsed-circuit design in which each circuit
has a separate link to the power supply. This helps to cancel
individual circuit noise and keep the ground potential free of
- HICC (High Instantaneous-Current Capability):
HICC enables an amplifier to immediately cancel the speakers' reflex
energy and instantaneously send out the next signal. The same high
current required to achieve this also supports the amplifier's
ability to handle speaker impedance fluctuations.
Anti-Vibration Chassis: The Onkyo TX-8050 features
an aluminum front-panel & anti-vibration oval chassis to prevent
resonance which could lead to distortion.
Discrete Amplifier Design: The Onkyo TX-8050 stereo
receiver features a discrete amplifier design with massive EI
transformer. The stereo amplifier is rated at 80W x 2ch (8Ω, 20-20kHz,
Listening Modes: This receiver incorporates a wide
variety of stereo listening modes to bring you maximum enjoyment from
Stereo||Sound is output by the front left & right
speakers, plus subwoofer with tone control.|
Music Optimizer||The Music Optimizer function enhances the
sound quality of compressed music files. The Music Optimizer
function only works with PCM digital audio input signals
with a sampling rate below 48kHz and analog input signals|
Direct||In this mode, audio from the input source is
output without any additional audio processing. This mode
delivers pure sound with minimum sound quality adjustment
Pure Audio||In this mode, the display and video circuitry
are turned off and the tone controls are bypassed,
minimizing possible noise sources for the ultimate in
Mono||Use this mode when watching an old movie with
a mono soundtrack.|
Tone Control: The Onkyo TX-8050 offers independent
Bass (+/-10dB @ 50Hz) & Treble (+/-10 @ 20kHz) control to fine-tune your
IntelliVolume: The IntelliVolume setup function
allows you set a volume correction value for each source, to prevent
large jumps in volume when switching from one source to another. This
feature eliminates the inconvenience of manually readjusting the volume
control each time you switch from a source with a weak signal to a
source with a strong signal and vice versa.
A & B Speaker Terminals: The Onkyo TX-8050 stereo
receiver is equipped with A & B speaker terminals to connect up to two
pair of speakers. The receiver uses binding post connectors for the A &
B speaker outputs. The binding posts are not 5-way because a plastic
collar prevents their use with spade lugs; they will accept bare wire,
pin connectors, single banana plugs, and dual banana plugs.
Impedance Switch: If you're using only one of the
speaker sets (A or B), choose the 4Ω setting if each speaker's impedance
is 4Ω to less than 6Ω, or choose the 6Ω setting if each speaker's
impedance is 6Ω or more. If you're using both of the speaker sets (A &
B), choose the 4Ω setting if each speaker's impedance is 8 to 16Ω.
Analog Audio Inputs/Outputs: The TX-8050 is equipped
with 7 analog audio inputs (3 audio only/4 AV in). There is also two
analog audio outputs (1 audio only/1 AV out).
Phono Input: Included in the 7 analog audio inputs,
is a Phono (MM) input with ground terminal.
Digital Inputs: The Onkyo network stereo receiver
features 4 digital audio inputs. There are 2 optical (toslink) digital
inputs and 2 coaxial (RCA) digital inputs. The receiver's digital inputs
do not support multichannel audio signal; PCM signal only.
Preamp Outputs: The Onkyo TX-8050 network stereo
receiver employs a mono-subwoofer preamp output, a stereo preamp output,
and a Zone2 preamp output.
- Subwoofer Pre-Out: The Onkyo TX-8050 network
stereo receiver is equipped with a mono subwoofer preamp output to
connect a powered subwoofer.
- Stereo Pre-Out: If you want to use a separate
power amplifier and use the receiver as a preamp, simply connect the
receiver's stereo preamp-output to your amp's input, and connect all
speakers to the power amplifier.
- Zone2: Zone 2 pre-outs on the TX-8050 allow you
to send a stereo audio signal to a second room equipped with an
amplifier and a pair of speakers. You can either enjoy the same
source in both rooms, or play a different source in Zone 2. You can
choose from analog, USB, or Network sources. Digital inputs (both
optical/coaxial) cannot be output to Zone 2. You are able to adjust
the volume from either the Onkyo stereo receiver or from your Zone 2
Note: You must currently be listening to a USB
device or Network audio source in the Main Zone to initially select
USB or Network as a source in Zone 2 or Zone 3. Then you can switch
the Main Zone to any source you desire. You cannot select different
AM/FM radio stations or listen to USB and Network content in
separate Zones at the same time.
Headphones: When headphones are plugged into the
full-size 1/4" jack on the front panel, the A & B main speakers are
automatically muted (the Powered Zone 2 speakers are not muted). When
you connect an iPod or iPhone to the USB port on this receiver, no sound
will be output from the headphone jack.
Composite Video: Although not a surround sound
receiver, the TX-8050 does employ composite video inputs & outputs; so
it can be used in a basic A/V system.
- 4 Composite Video Inputs: There are 4 composite
video inputs to connect your audio/video devices to the receiver.
- Composite Video Record Output: There is a
single composite video record output for recording purposes.
- Composite Video Monitor Output: There is a
single composite video monitor output to connect to your television.
Note: The TX-8050 does not contain any
S-video, component video, or HDMI inputs/outputs.
Network & Tuner Functions
Network-Ready: The Onkyo TX-8050 stereo receiver is
network-ready, which means you can connect it to your home network with
a standard Ethernet cable and enjoy the music files stored on your
computer or media server. If your network is connected to the Internet
(broadband), you can also enjoy Internet radio.
Optional Wi-Fi Adapter: The TX-8050 is compatible
UWF-1 Wireless LAN adapter, allowing you to connect to a wireless
network. The UWF-1 operates on the 2.4 GHz wireless transmission
frequency, and supports IEEE 802.11 b/g/n. The adapter features a Type A
USB plug and connects to the USB port on the front of the receiver.
Ethernet Connection (LAN): Connecting the stereo
receiver's Ethernet (RJ-45) port to a 100Base-TX switched Ethernet
network is recommended for best results. Use a shielded CAT-5 Ethernet
cable to connect the receiver to your home network.
Media Server Playback: You can play back music files
stored on your computer or media server (the TX-8050 is DLNA certified).
Compatible music file formats include MP3 (8-320 kbps), WMA (47-320k
bps), WMA Lossless (16/24-bit), WAV (8/16/24-bit), AAC (8-320 kbps),
FLAC (16/24-bit), Ogg Vorbis (48-500 kbps), and LPCM (8/16/24-bit). Each
folder on the server may contain up to 20,000 music files, and folders
may be nested up to 16 levels deep. The receiver can play digital music
files stored on a computer or media server using the following
- Windows Media Player 11 or 12
- Windows Media Connect 2.0
- DLNA-Compatible Media Server
Internet Radio: The Onkyo TX-8050 lets you access
various Internet Radio providers through its Ethernet network
connection. The TX-8050 will display station name and program-related
information, such as - artist name, song title, and elapsed playing
time. You can preset up to 40 of your "favorite" Internet radio stations
for easy recall.
|vTuner||vTuner offers easy browsing
of internet radio stations and podcasts. vTuner enables
access to web-based radio stations and podcasts via an
extremely reliable online database with a wide variety of
content. You can browse content by Genre, Location,
Language, and Favorites.|
|Pandora||Pandora is a free,
personalized Internet radio service that plays the music you
know and helps you discover music you'll love. You can
select Internet radio stations by Artist, Song, or Genre.|
|Rhapsody||Rhapsody is a streaming
music subscription service (starting a $10 per month) that
allows you to play the full-length songs you choose on
demand from a collection of over 10 million songs, without
ads and without having to purchase or download the music.|
|Slacker||Slacker is a free,
personalized Internet radio service that lets you choose the
music you want to listen to. You can choose Internet radio
stations by genre, or create custom station by Artist name
or Song title.|
|Spotify ||Spotify is a digital music
service that gives you on-demand access to one of the
largest music libraries in the world (over 15 million tracks
and counting). Spotify makes it easier than ever to
discover, manage, and share music with your friends. You can
browse music by artist, album, track, or most popular;
create your own music library with customized playlists; as
well as share your music via Facebook, Twitter, or Windows
|AUPEO!||AUPEO! Personal Radio is a
music streaming service based in Berlin that is available
worldwide. With AUPEO! Personal Radio, you can listen to
free music on the web. AUPEO! lets you play lots of music
and choose the playlist based on your personal taste. The
basic concept is based on personal music DNA, which allows
you to 'love' or 'ban' songs. The highly advanced software
then remembers this and adjusts as necessary. As a result,
we offer over 100 compilation genre channels, as well as
thousands of artist channels. Listen to music online based
on your tastes and preferences or use our one-of-a-kind
'Mood Tuner' to fit how you're feeling.|
Note: To receive Internet radio, your Ethernet
network must have Internet access. Internet URLs in the following
formats are supported: PLS, M3U, and podcast (RSS). However,
depending on the type of data or audio format used by the Internet
radio station, you may not be able to listen to some stations.
AM/FM Tuner: The Onkyo TX-8050 stereo receiver
features a built-in AM/FM tuner with manual, seek, and preset tuning.
You can store your favorite stations as presets for quick selection. You
can store a combination of up to 40 of your favorite FM/AM radio
stations as presets. You can then label each preset with a 10 character
name. The TX-8050 also lets you directly tune in AM/FM stations using
its remote control.
Firmware Updates: Future firmware updates are
available from the Onkyo website through the receiver's Network or USB
http://www.onkyousa.com/download/software.cfm for the latest
Front-Panel USB Port: A USB MSC (Mass Storage Class)
memory device can be connected to the USB (type-A) terminal located on
the front-panel, allowing you to play music files through the receiver.
Your USB MSC device must be formatted in FAT16 or FAT32. Compatible
music file formats include MP3 (8-320 kbps), WMA (47-320k bps), WMA
Lossless (16/24-bit), WAV (8/16/24-bit), AAC (8-320 kbps), FLAC
(16/24-bit), Ogg Vorbis (48-500 kbps), and LPCM (8/16/24-bit). The
receiver can recognize up to 20,000 music files in each folder. You can
control basic playback functions of your connected USB device's music
from the included remote control, such as - Folder/File Select,
Play/Pause, Stop, Fast Forward/Rewind, Skip (next/previous), and
Repeat/Random. MP3 players containing music files that are managed with
special music software are not supported.
iPod/iPhone Direct: Using a USB-to iPod-Dock cable
plugged into the front-panel USB port, music can be played directly from
an iPod/iPhone, bypassing the iPod/iPhone's DAC. The iPod/iPhone is
controlled by the receiver's remote, or you can continue to control your
iPod/iPhone from its clickwheel or touchscreen. Song/artist information
and elapsed time are displayed on the receiver's front-panel display (not
on-screen). You can navigate your iPod/iPhone's music using the
front-panel display & remote control by Playlist, Artist, Album Genre,
Song, or Composer. Your iPod/iPhone's battery will be charged while
connected to the receiver. Using the dock cable to connect directly,
iPod/iPhone compatibility is as follows (9/24/2013):
|iPod/iPhone Model||Generation||Tested Version||Media Type||Control Type||Display Type||Charge|
|Audio||Video||Remote||iPod/iPhone||Album Art||Artist/Song Text||Track Info |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you
may need to reset the unit and your iPod/iPhone to regain
functionality. If this doesn't work, you may need to wait until a
newer software update is available.
Preset Input Names: You can enter a preset name for
each individual input for easy identification. when entered, the preset
name will appear on the display. This feature cannot be used for AM/FM
tuner, or USB input.
Display Dimmer: The display brightness has three
settings; Dim, Dimmer, and Normal.
Sleep Timer: From the remote, you can set the unit
to automatically turn off after as much as 90 minutes or as little as 10
minutes; choices are presented in 10 minute increments.
Remote Control: The included IR remote control
operates this unit & compatible Onkyo cassette players, CD players, DVD
players, and iPods/iPhones.
Onkyo Remote App (for Apple iOS & Android): The
Onkyo Remote App (from
iTunes Apps &
Google Play) allows you to operate the Onkyo receiver from your
Apple iOS (4.3+) or Android (2.1+) device, using your home's wireless
network. The Onkyo Remote App lets you you access Internet Radio
stations, AM/FM stations, DLNA content, and Input sources right from
your mobile device. Content information will be displayed on the
device's touchscreen. You also get to adjust tone controls, listening
modes, and speaker volume from your compatible Apple iOS or Android
device. The Onkyo Remote App even allows you to wirelessly stream audio
stored on your Apple iOS or Android device to the Onkyo receiver and
lets you control audio output for up to 2 Zones. The Onkyo receiver and
and your compatible Apple iOS or Android device must be connected to the
same home network.
Remote Inputs/Outputs: The TX-8050 contains RI
Control & IR Remote connections.
- IR Input/Output: The 3.5mm IR input jack allows
you to control the receiver without line-of-sight access using an
optional IR remote control system and locating the remote sensor in
sight. The 3.5mm IR output jack allows you to send the control
signals to an additional components.
- RI Remote Control Jack: The 1/8" RI remote
control jack allows you to connect this receiver to other compatible