Network & Tuner Functions
Five Channel Amplifier: The Onkyo TX-NR525 AV receiver features a
5-channel amplifier rated
at 80 watts (into 8-ohms, at 20Hz-20kHz, with 0.7%, driving 2 channels).
The AV receiver's amplifier employs WRAT, H.C.P.S, and Optimum Gain
Volume Circuitry for dynamic, detailed, clear sound.
- WRAT (Wide Range Amplifier Technology): WRAT is
based around a low negative-feedback circuit topology that works to
reduce signal noise and distortion across the frequency range. A
"closed ground-loop circuit" design is employed, in which each
circuit has a separate link to the power supply. This helps to
cancel individual circuit noise and keep the ground potential free
of distortion. High Instantaneous Current Capability (HICC) enables
WRAT amplifiers to immediately cancel the speakers' reflex energy
and instantaneously send out the next signal. The same high current
better manages speaker impedance fluctuations, which can negatively
- H.C.P.S. (High Current Power Supply): Under the
anti-resonant cover of any Onkyo receiver, you'll instantly notice
the High Current Power Supply (H.C.P.S.) transformer. With its huge,
isolated power supply design and high-capacity filter capacitors, it
delivers the large amounts of power necessary for reproducing the
wide dynamics of movie soundtracks and the detail and clarity of
- Optimum Gain Volume Circuitry: Optimum Gain
Volume Circuitry adjusts the gain so that less than half the amount
of attenuation is needed, ensuring the signal never comes close to
the noise floor. This protects the signal against noise, resulting
in a dramatically clearer sound.
192kHz/24-bit DACs + 32-Bit DSP Processing: This
Onkyo TX-NR525 is equipped with 192kHz/24-bit Burr-Brown DACs to decode
and playback high-resolution recordings with less jitter and clearer
sound. The receiver also employs a powerful and highly accurate 32-bit
processing DSP (Digital Signal Processor) for better surround sound
Multi-Channel Decoding Formats: The Onkyo TX-NR525
AV receiver supports the following multi-channel (Dolby Digital, DTS,
Dolby Pro Logic) decoding formats.
Note: Dolby Digital and DTS listening modes can
only be selected if your audio source is connected to the AV
receiver via a digital audio connection (HDMI, optical or coaxial).
Even though the AV receiver will decode 7.1channel surround sound
(via HDMI), it will only output 5.1ch surround, because it lacks
Surround Back channel speaker outputs.
Onkyo Original DSP Modes: Onkyo's Original DSP
Modes, combined with Dolby Digital/DTS/Dolby Pro Logic processing,
produce more realistic, powerful sound effects for your movie and music
sound tracks based on the type of content and your home theater setup.
You can choose from the following:
- Orchestra: For classical or operatic music.
- Unplugged: For acoustic instruments, vocals,
- Studio-Mix: Suitable for rock or pop.
- TV Logic: Adds realistic acoustics to TV shows.
- Game: The receiver offers four different Gaming
modes - RPG, Action, Rock, and Sports.
- All Ch Stereo: Stereo sound from all speakers.
Ideal for background music.
- Full Mono: All speakers output the same sound
- Theater-Dimensional (T-D): Theater-Dimensional
circuitry takes the complexity out of conventional surround-sound
setups and lets you experience the excitement of surround sound from
as few as two ordinary speakers. Theater-Dimensional's unique
multi-speaker modes let you place up to five speakers conveniently
by the TV, for the most realistic virtual-surround sound possible.
Direct Mode: In Direct mode, audio from the input
source is output without surround-sound processing. This mode delivers
pure sound with minimum sound quality adjustment and filtration.
Audyssey Technology: The TXN-R525 features a full
package of Audyssey audio technologies for optimal sound quality.
Audyssey Dynamic Volume offers real-time volume adjustment, while
Audyssey DynamicEQ improves your system's surround effects during low
volume levels. Audyssey MultEQ automatically sets speakers to suit
your room's listening environment and the speakers' characteristics.
- Audyssey MultEQ Automatic Speaker Setup:
With the supplied speaker setup microphone, Audyssey MultEQ
determines the number of speakers connected, their optimum crossover
frequencies, and their distances from the primary listening
position, then adjusts each automatically. The room's acoustical
properties are then measured and corrected over the listening area
in both the frequency and time domain. There is a threaded insert on
the bottom of the microphone so it can be mounted on a tripod for
accurate listening position placement. Up to 6 listening position
measurements are taken to optimize the surround effect for a broad
area. If you prefer you can also setup your speaker system manually.
- Audyssey Dynamic EQ: Audyssey Dynamic EQ solves
the problem of deteriorating sound quality as volume is decreased by
taking into account human perception and room acoustics. Dynamic EQ
selects the best possible frequency response and surround levels
moment-by-moment as volume is changed. The result is bass response,
tonal balance and surround impression that remain constant despite
changes in volume. Audyssey Dynamic EQ combines information from
incoming source levels with actual output sound levels in the room,
a prerequisite for delivering a loudness correction solution.
Audyssey Dynamic EQ works in tandem with Audyssey 2EQ to provide
well-balanced sound for every listener at any volume level.
- Audyssey Dynamic Volume: Audyssey Dynamic
Volume solves the problem of large variations in volume level
between television programs, commercials, and between the soft and
loud passages of movies. Dynamic Volume looks at the preferred
volume setting by t he user and then monitors how the volume of
program material is being perceived by listeners in real time to
decide whether an adjustment is needed. Whenever necessary, Dynamic
Volume makes the necessary rapid or gradual adjustments to maintain
the desired playback volume level while optimizing the dynamic
range. Audyssey Dynamic EQ is integrated in Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity
remain the same whether watching movies, flipping between television
channels, or changing from stereo to surround sound content.
Surround Parameters: The Onkyo TX-NR525 lets you
tweak and fine tune specific surround sound modes to suit your
- Dolby Pro Logic II Music Settings: While
listening in the Dolby Pro Logic II Music format, there are three
further enhancements you can adjust; Panorama: (broadens the front
stereo image to the surround speakers to provide a wraparound
effect), Dimension (allows you to move the sound field forward or
backward), and Center Width (allows you to adjust the width of the
- Center Image: In the Neo:6 Music mode, the
Center Image feature adjusts the output of the left and right
channels relative to the center channel, allowing you to make the
center channel more or less dominant as needed. This improves the
image of the center channel, especially when the listener is
off-center. Adjustment varies from 5 (nothing subtracted from the
L/R channels) to 0 (L/R channel output is cut in half).
- Screen Centered Dialogue: By using the front
high speakers, this function moves the center image of the dialogue
upwards, so that the image of dialogue is fixed to the display
- Listening Angle: While listening in the Theater
Dimensional mode you can adjust the listening angle to either Wide
(if listening angle is 40°) or Narrow (if listening angle is 20°).
Audio Enhancements: The Onkyo TX-NR525 receiver
provides various audio enhancements to deliver a high-quality listening
experience every time.
- CinemaFilter: Using the CinemaFilter you soften
overly bright movie soundtracks. Movie soundtracks are typically
mixed for a large theater (relative to your home theater) with lots
of soft seats and thick curtains on the walls. Home theater settings
often lack these high frequency absorbing wall treatments, making
the soundtrack sound too bright. CinemaFilter accounts for this and
for many movies sounds more natural at home.
- Music Optimizer: The Music Optimizer function
enhances the sound quality of compressed music files. The Music
Optimizer function only works with PCM digital audio input signals
with a sampling rate below 48kHz and analog input signals.
- Late Night Feature: The Late Night feature
limits the dynamic range of Dolby Digital recordings. Limiting the
dynamic range makes it easier to find a volume that ensures the
quiet sounds are not too quiet and the loud sounds are not too loud
for night time listening. This allows you to comfortably listen to
without the need to constantly adjust the volume to keep from waking
family/neighbors. The choices are: Off, Low, and High. This feature
only works with Dolby Digital Encoded software and the depth of the
feature will vary based on the individual software package.
- Phase Matching Bass: Onkyo's Phase-Matching Bass
optimizes low frequencies while preserving mid-range clarity. This
means that powerful bass plays back with clear vocals; it doesn't
- Bass & Treble: You can independently adjust the
Bass (50Hz) and Treble (20kHz) of the TX-NR525 from -10 to +10 dB.
Audio Inputs/Outputs: The Onkyo AV receiver offers a
variety of analog and digital audio inputs/outputs.
- Assignable Digital Inputs: The Onkyo receiver
is equipped with one optical digital input and two coaxial digital
inputs. All three digital inputs are assignable. You can choose auto
decoding , PCM, or DTS for the digital audio inputs. Auto will
decode the signal in its original form (Dolby Digital, DTS, PCM,
etc), PCM decodes the signal to 2-channel, while DTS decodes only
DTS formatted sources.
- Binding-Post Speaker Terminals: There are
color-coded binding-post terminals for the following speaker
connections; Front, Center, and Surround. The binding post terminals
will accept bare-wire, pin-connectors, and banana plugs
- Dual Subwoofer Outputs: The receiver is fitted with two
subwoofer outputs to connect dual powered subs for extra bass. Use
6- to 16-ohm speakers.
- Headphones: When headphones are plugged into
the full-size 1/4" jack on the front panel, all the speakers are
automatically muted. When you connect an iPod or iPhone to the USB
port on this receiver, no sound will be output from the headphone
HDMI (v1.4): The TX-NR525 has six assignable HDMI
v1.4 inputs and one HDMI v1.4 output for connecting Blu-ray/DVD players,
Satellite/Cable boxes, Game Consoles, and other video components to your
TV. The HDMI jacks can accept and switch 480i, 480p, 720p, 1080i, 1080p,
and 4K video signals to a HDTV. The HDMI jacks will also support
uncompressed standard or high definition digital video along with the
following audio signals; 2-channel linear PCM, Multichannel linear PCM
(up to 7.1ch), and Bitstream (Dolby Digital/DTS, etc.). In addition, the
HDMI jacks are 3D, ARC, HDMI-CEC, Deep/x.v.Color, and Auto Lip-Sync
- 4K Pass Through: 4K Pass Through allows the
Onkyo TX-NR525 to receive ultra high-definition resolution video and
pass the video signal to a 4K compatible TV or display monitor. This
ensures compatibility with the latest super high resolution video
- 3D-Ready: The TX-NR525 's HDMI v.1.4
connections will accept 3D video from your 3D-ready Blu-ray player
and output the video signal in 3D to your 3D-ready flat-panel
- Deep/x.v.Color Support: The Onkyo receiver
supports Deep Color and x.v.Color content, which can display a
larger color range than standard-definition schemes. The result is a
more lifelike, vibrant picture.
- ARC (Audio Return Channel): This feature allows
audio to be sent from your compatible HDTV to your receiver through
the same HDMI cable already being used to send audio and video to
your HDTV. This eliminates the need for extra cables connected to
your television. The receiver's main HDMI monitor output supports
the ARC function, while the sub HDMI monitor output does not.
- Auto Lip-Sync: The Lip-Sync function can
automatically synchronize HDMI audio and video that has gotten out
of sync due to the complex digital video processing being performed
by your HDMI-compatible TV. With HDMI Lip-Sync, the audio delay
required to synchronize the audio and video is calculated and
applied automatically by the AV receiver.
HDMI Through: When enabling the HDMI Through
function, regardless of whether the AV receiver is "on" or in "standby"
both audio and video streams from an HDMI input will be output to your
television, via the receiver HDMI monitor output. You can select between
3 HDMI Through functions modes.
- Auto: Detects the signal and automatically
selects the input sources.
- Source: Selects the input source (BD/DVD,
VCR/DVR, CBL/SAT, Game, PC, Aux, TV/CD, Port) for which the HDMI
Through function in enabled.
- Last: The HDMI Through function is activated on
the input source selected at the time of setting the AV receiver to
the "standby" mode.
InstaPrevue: InstaPrevue technology provides a live
video thumbnail of the available content on your devices connected to
the receiver via HDMI. As a result, you can preview audio/video streams
coming from up to 5 HDMI inputs previously assigned to input selectors
on your HDMI connected TV. Even with multiple components connected to
receiver through HDMI, you can easily switch between inputs as their
previews are displayed on a single screen on your television. You can
even use the InstaPrevue feature for Picture-in-Picture. You can specify
the number of preview thumbnails, as well as their positioning
Note: If no video signal are present, the
thumbnails will be filled in black. With 3D video signals, the image
may not be properly rendered on the preview thumbnails of
Analog Video Inputs: The receiver features five
composite video inputs (4 rear/1 front) and one composite video monitor
output. There are two component video inputs and one component video
output. You must connect the receiver to your TV via composite and/or
component video to view incoming video from the receiver's
composite/component inputs. There is no analog video conversion.
Front-Panel AV Input: The Onkyo TX-NR525 is equipped
with a front-panel audio/video input which consists of a composite video
terminal and stereo audio RCA jacks.
Picture Adjust: Using the Picture Adjust feature,
you can adjust the picture quality and reduce any noise appearing on
your TV screen.
- Wide Mode: Auto, Full, Zoom, Wide Zoom, or 4:3.
- Picture Mode: Custom
(Brightness/Contrast/Hue/Saturation/Color Temp), Cinema (for
movies), Game (for gaming), Through (changes resolution), Direct (no
- Picture Settings: Film Mode (video or film),
Edge Enhancement (sharpens image), Noise Reduction (reduce noise).
A/V Sync Control: Occasionally, you may need to
manually adjust the audio/video signals that are not properly
synchronized manually. Typically when using a progressive scanning DVD
player. You can correct this by delaying the audio; options are 0 (no
delay) to 400 milliseconds, in 10 millisecond steps.
Network & Tuner Functions
Network Connection: The Onkyo TX-NR525 A/V receiver
is network-ready, which means you can connect it to your home network
with a standard Ethernet cable and enjoy the music files stored on your
computer or media server. If your network is connected to the Internet
(broadband), you can also enjoy Internet radio. Connecting the A/V
receiver's Ethernet (RJ-45) port to a 100Base-TX switched Ethernet
network is recommended for best results. Use a shielded CAT-5 Ethernet
cable to connect the receiver to your home network.
Media Server Playback: You can play back music files
stored on your computer or media server (the TX-NR525 is DLNA
certified). Compatible music file formats include MP3 (8-320 kbps), WMA
(47-320k bps), WMA Lossless (16/24-bit), WAV (8/16/24-bit), AAC (8-320
kbps), FLAC (16/24-bit), Ogg Vorbis (48-500 kbps), and LPCM
(8/16/24-bit). Each folder on the server may contain up to 20,000 music
files, and folders may be nested up to 16 levels deep.The following
media servers are compatible:
- Windows Media Player 11 or 12
- Windows Media Connect 2.0
- DLNA (ver.1.5)-Compatible Media Server
Note: If the operating system of your personal
computer is Windows 7, Windows Media Player 12 is already
installed. If the operating system of your computer is Windows
Vista, Windows Media Player 11 is already installed.
Internet Radio: The Onkyo TX-NR525 lets you access
various Internet Radio providers through its Ethernet network
connection. The TX-NR525 will display station name and program-related
information, such as - artist name, song title, and elapsed playing
time. You can preset up to 40 of your "favorite" Internet radio stations
for easy recall.
|vTuner||vTuner offers easy browsing
of internet radio stations and podcasts. vTuner enables
access to web-based radio stations and podcasts via an
extremely reliable online database with a wide variety of
content. You can browse content by Genre, Location,
Language, and Favorites.|
|Pandora||Pandora is a free,
personalized Internet radio service that plays the music you
know and helps you discover music you'll love. You can
select Internet radio stations by Artist, Song, or Genre.|
|Rhapsody||Rhapsody is a streaming
music subscription service (starting a $10 per month) that
allows you to play the full-length songs you choose on
demand from a collection of over 10 million songs, without
ads and without having to purchase or download the music.|
|SiriusXM||SiriusXM Internet Radio
lets you listen to over 120 channels of
commercial-free music, talk radio, news, sports, and more.|
|Slacker||Slacker is a free,
personalized Internet radio service that lets you choose the
music you want to listen to. You can choose Internet radio
stations by genre, or create custom station by Artist name
or Song title.|
|AUPEO!||AUPEO! Personal Radio is a
music streaming service based in Berlin that is available
worldwide. With AUPEO! Personal Radio, you can listen to
free music on the web. AUPEO! lets you play lots of music
and choose the playlist based on your personal taste. The
basic concept is based on personal music DNA, which allows
you to 'love' or 'ban' songs. The highly advanced software
then remembers this and adjusts as necessary. As a result,
we offer over 100 compilation genre channels, as well as
thousands of artist channels. Listen to music online based
on your tastes and preferences or use our one-of-a-kind
'Mood Tuner' to fit how you're feeling.|
Note: To receive Internet radio, your Ethernet
network must have Internet access. Internet URLs in the following
formats are supported: PLS, M3U, and podcast (RSS). However,
depending on the type of data or audio format used by the Internet
radio station, you may not be able to listen to some stations.
AM/FM Tuner: With the built-in tuner you can enjoy
AM and FM radio stations. You can store your favorite stations as
presets for quick selection. You can store a combination of up to 40 of
your favorite FM/AM radio stations as presets.
Firmware Updates: Future firmware updates are
available from the Onkyo website through the receiver's Network or USB
connection. The tested TX-NR525 contained firmware version
1030-3103-0100. Visit Onkyo's online
Download Center for the latest firmware updates.
Dual USB Ports: A USB MSC (Mass Storage Class)
memory device can be connected to the receiver's front-panel or
rear-panel USB (type-A) terminal, allowing you to play music files
through the receiver. Your USB MSC device must be formatted in FAT16 or
FAT32. Compatible music file formats include MP3 (8-320 kbps), WMA
(47-320k bps), WMA Lossless (16/24-bit), WAV (8/16/24-bit), AAC (8-320
kbps), FLAC (16/24-bit), Ogg Vorbis (48-500 kbps), and LPCM
(8/16/24-bit). Up to 20,000 folders can be displayed, and folders may be
nested up to 16 levels deep. You can control basic playback functions of
your connected USB device's music from the included remote control, such
as - Folder/File Select, Play/Pause, Stop, Fast Forward/Rewind, Skip
(next/previous), and Repeat/Random. USB portable audio players that can
be charged via USB will be charged when plugged into the AV receiver's
USB port; even in standby mode (the front-panel USB port is rated at
5V/1A, while the rear-panel USB port is rated at 5V/0.5A).
Note: USB hubs and USB devices with hub
functions are not supported. MP3 players containing music files that
are managed with special music software are not supported.
iPod/iPhone Direct: Using a USB-to iPod-Dock cable
plugged into the front-panel USB port, music can be played directly from
an iPod/iPhone, bypassing the iPod/iPhone's DAC. To view the video
content from your iPod/iPhone, connect it to the receiver's front-panel
USB port and composite video input
using the official Apple Composite AV Cable (sold separately).
Your connected iPod/iPhone is controlled by the receiver's remote, or
you can continue to control your iPod/iPhone from its clickwheel or
touchscreen. Song/artist information and elapsed time are displayed on
the receiver's front-panel display and your connected TV screen (via
HDMI only). You can navigate your iPod/iPhone's music using the
on-screen menu and remote control by Playlist, Artist, Album Genre,
Song, or Composer. Video stored on your iPod/iPhone can be searched by
Movie, Music Video, TV Show, Video Podcast, Rented Movie, or Video
iTunesU. You can also shuffle the playback of your iPod/iPhone's music
and view the Now Playing screen. Your iPod/iPhone's battery will be
charged while connected to the receiver. Using the dock cable to connect
directly, iPod/iPhone compatibility is as follows (9/24/2013):
|Apple Device||Generation||Tested Version||Media Type||Control Type||Display Type||Charge|
|Audio||Video||Remote||iPod/iPhone||Album Art||Artist/Song Text||Track Info |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you
may need to reset the unit and your iPod/iPhone to regain
functionality. If this doesn't work, you may need to wait until a
newer software update is available.
On-Screen Display (via HDMI): The Onkyo AV receiver
offers an on-screen setup menu through its HDMI output. The on-screen
display offers multiple language text, such as - English, French,
Spanish, German, and Italian. If your TV is connected to the composite
video or component video monitor output, you will need to use the AV
receiver's front-panel display when changing settings.
Zone 2 Line Out: By using the Zone 2 line-level
outputs on the TX-NR525, you can connect an external receiver or
integrated amplifier in a second room, allowing you to listen to 5.1ch
surround in the main room and 2ch stereo of a different audio source in
another room of your home. The volume of Zone 2 is controlled by your
optional integrated amp.
- Compatible Zone Sources: Only Tuner, analog, USB, and
Network audio sources can be sent to Zone 2. You cannot select different
AM/FM radio stations or listen to USB and Network content in separate Zones
at the same time.
To playback Bluetooth audio in Zone 2, you must also have Bluetooth selected
as your source in the main zone.
- Incompatible Zone Sources: Optical/coaxial digital and
HDMI audio sources are not output to Zone 2. You cannot output any video
signal to Zone 2.
Name Edit: You can enter a custom name for each
individual input selector and radio preset for easy identification. When
entered, the custom name will appear on the display. This function
cannot be used for the Network and USB input selectors.
Display Dimmer + Screen Saver: The display
brightness has three settings; Dim, Dimmer, and Normal. If there is no
video signal on the current input source and no operation for a specific
time, a screen saver automatically comes on. You can set the time
(3min/5min/10min/off) until the screen saver activates itself. Once
active, the screen saver will go off and the screen will return to its
previous state if the AV receiver is operated in any way.
Auto & Hybrid Standby: The AV receiver will
automatically go into Standby mode, if there is no operation for 30
minutes with no audio/video signal input. The Onkyo TX-NR525 features
"Hybrid Standby" mode to save energy and provide greater levels of
convenience. Hybrid Standby Mode provides "HDMI through" functionality
and maintains a local network connection while the receiver is
essentially powered down. This allows the user to watch TV without
turning the whole surround system on. Furthermore, when on Hybrid
Standby, the home theater may be powered up from "cold" using the Remote
Apps for iPod touch/iPhone and Android.
Sleep Timer: From the remote, you can set the unit
to automatically turn off after as much as 90 minutes or as little as 10
minutes; choices are presented in 10 minute increments.
Optional Bluetooth Adapter (sold separately): The
Onkyo UBT-1 Bluetooth USB Adapter
sold separately) lets you wirelessly stream music from your
Bluetooth-enabled smartphone, portable audio player, tablet, laptop, or
PC to the Onkyo A/V receiver. The Onkyo UBT-1 is fitted with a male USB
(type-A) connector which plugs into the Onkyo receiver's USB (type-A)
port. The Onkyo UBT-1 is Bluetooth version 3.0 certified and lets you
wirelessly stream music from many Bluetooth-enabled devices supporting
A2DP (Advanced Audio Distribution Profile). The Onkyo UBT-1 is equipped
with apt-X, an audio coding technology that works within Bluetooth to
wirelessly deliver CD-quality audio from your Bluetooth-enabled device
to the Onkyo A/V receiver.
Note: Due to the differences in Bluetooth
technology, some Bluetooth enabled devices may be incompatible,
function improperly, or may not support all features when used with
the Onkyo UBT-1.
Multi-brand Remote: The receiver comes with an IR
remote control for wireless operation of this receiver and other
HDMI-connected sources (via HDMI CEC). In addition to the receiver, the
remote can be programmed to control popular brands of TVs, Blu-ray
players, DVD players/recorders, DVRs, VCRs, etc.
HDMI Control: This function allows CEC-compatible
components (Toshiba REGZA-LINK TV/Sharp TV) or RIHD-compatible
components connected via HDMI to be controlled with the TX-NR525 . The
AV receiver offers the following CEC HDMI controls.
- The AV receiver will enter Standby mode when the power of the TV
is turned to Standby.
- You can set on the menu screen of the TV to either output the
audio from the speakers connected to the AV receiver, or from the
speakers of the TV.
- It is possible to output the audio/video from the antenna or
from the input jack of the TV from the speakers connected to the AV
- Input to the AV receiver can be selected with the remote
controller of the TV.
- Operations such as volume adjustment or similar for the AV
receiver can be performed from the remote controller of the TV.
RI Remote Control Jack: The 1/8" RI remote control
jack allows you to connect this receiver to other compatible Onkyo
Onkyo Remote App (for Apple iOS & Android): The Onkyo Remote
iTunes Apps &
Google Play) allows you to operate the Onkyo AV receiver from your
Apple iOS (4.3+) or Android (2.1+) device, using your home's wireless
network. The Onkyo Remote App lets you you access Internet Radio
stations, AM/FM stations, DLNA content, and Input sources right from
your mobile device. Content information will be displayed on the
device's touchscreen. You also get to adjust tone controls, listening
modes, and speaker volume from your compatible Apple iOS or Android
device. The Onkyo Remote App even allows you to wirelessly
stream audio stored on your Apple iOS or Android device to the Onkyo AV receiver
and lets you control audio output for up to 2 Zones. The Onkyo AV
receiver and and your compatible Apple iOS or Android device must be
connected to the same home network.